Dyson DC58 DC59 Mini Motorized Cleaner Head User Manual

1. Introduction

This manual provides essential information for the proper use, maintenance, and troubleshooting of your Genuine Dyson DC58 DC59 Mini Motorized Cleaner Head. This attachment is designed to enhance the cleaning performance of your compatible Dyson vacuum cleaner, particularly for removing ingrained dirt from carpets and for effective use on hard floors.

The mini motorized tool features ultra-fine carbon rotating brushes, making it an effective solution for various cleaning tasks.

2. Compatibility

This Genuine Dyson Mini Motorized Cleaner Head (Part Number: 962748-01) is compatible with the following Dyson vacuum cleaner models:

• Dyson DC58
• Dyson DC59

Please verify your vacuum cleaner model to ensure compatibility. If you are unsure, refer to your vacuum cleaner's manual or contact Dyson customer support.

3. Key Features

• Genuine Dyson Part: Ensures optimal performance and fit with compatible Dyson models.
• Mini Motorized Design: Provides powerful agitation for deep cleaning.
• Carbon Fiber Brushes: Ultra-fine carbon rotating brushes effectively remove ingrained dirt from carpets and are gentle on hard floors.
• Compact Size: Ideal for cleaning confined spaces, upholstery, stairs, and car interiors.
• Part Number: 962748-01.

4. Setup and Installation

Follow these steps to attach the Mini Motorized Cleaner Head to your Dyson vacuum cleaner:

1. Ensure your Dyson vacuum cleaner is turned off and unplugged (if applicable) before attaching or detaching any accessories.
2. Locate the connection point on your Dyson vacuum cleaner's wand or main body.
3. Align the Mini Motorized Cleaner Head's connector with the vacuum's connection point.
4. Push the cleaner head firmly onto the vacuum until it clicks securely into place. You should hear an audible click, indicating a proper connection.
5. To detach, press the release button (if present on your vacuum or the attachment) and pull the cleaner head away from the vacuum.

Figure 4.1: Front view of the Dyson Mini Motorized Cleaner Head, showing the main body and connection point.

Figure 4.2: Angled view of the cleaner head, illustrating its compact design.

Figure 4.3: Side view showing the attachment mechanism and the Dyson logo.

5. Operating Instructions

Once the Mini Motorized Cleaner Head is securely attached, you can begin cleaning:

1. Turn on your Dyson vacuum cleaner. The motorized brush bar within the cleaner head will begin to rotate.
2. Move the cleaner head slowly over the surface you wish to clean. For carpets, use a back-and-forth motion to allow the brushes to agitate and lift dirt effectively.
3. For hard floors, the carbon fiber filaments help to pick up fine dust and debris without scratching the surface.
4. The compact size of this tool makes it ideal for cleaning stairs, upholstery, pet beds, and car interiors.
5. Avoid applying excessive pressure, as the motorized action is designed to do the work.

Figure 5.1: Underside view of the cleaner head, revealing the red and black brush bar with carbon fiber filaments.

Important Notes:

• Do not use the cleaner head on wet surfaces or to pick up liquids.
• Ensure the brush bar is free from obstructions before and during operation.
• If the brush bar stops rotating, turn off the vacuum and check for blockages (refer to Troubleshooting section).

6. Maintenance and Care

Regular maintenance ensures the longevity and optimal performance of your Mini Motorized Cleaner Head.

Cleaning the Brush Bar:

1. Turn off and detach the cleaner head from your vacuum.
2. Using a coin or a flat-head screwdriver, unlock the end cap of the brush bar (usually indicated by a lock/unlock symbol).
3. Slide the brush bar out of the cleaner head.
4. Remove any tangled hair, threads, or debris from the brush bar using scissors or a brush. Be careful not to cut the bristles.
5. Clean the inside of the cleaner head where the brush bar sits, removing any accumulated dust or debris.
6. Once clean, reinsert the brush bar, ensuring it clicks back into place, and lock the end cap.

General Care:

• Wipe the exterior of the cleaner head with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Do not immerse the cleaner head in water or any other liquid.
• Store the cleaner head in a dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your Mini Motorized Cleaner Head, refer to the following common problems and solutions:

8. Product Specifications

Figure 8.1: General diagram showing how vacuum attachments connect, illustrating conical connections. This is a general example and not specific to the Dyson cleaner head's direct connection.

9. Warranty and Support

Information regarding specific warranty terms for this Dyson Mini Motorized Cleaner Head is typically provided with the original purchase or can be found on the official Dyson website. As this is a genuine Dyson part, it is subject to Dyson's standard accessory warranty policies.

For technical support, warranty claims, or to purchase additional genuine Dyson parts, please contact Dyson Customer Service directly or visit their official website:

• Dyson Official Website: www.dyson.com
• Customer Service: Refer to the contact information provided in your original Dyson vacuum cleaner manual or on the Dyson website for your region.