PetSpy M86-2 Dog Training Collar User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your PetSpy M86-2 Dog Training Collar. Please read this guide thoroughly before operating the device to ensure proper setup, training techniques, and maintenance. This system is designed to assist in training up to two dogs with various stimulation modes.

Important Safety Information

• Not for Aggressive Dogs: Do not use this product on aggressive dogs. Consult a professional trainer for behavioral issues.
• Supervision Required: Always supervise your dog during training sessions. Never leave your dog unattended with the training collar on.
• Collar Fit: Ensure the collar fits properly. It should be snug enough for the contact points to touch the skin, but loose enough to allow two fingers to fit comfortably between the collar and your dog's neck.
• Duration of Wear: To prevent skin irritation, avoid leaving the collar on your dog for more than 4 hours a day. Reposition the collar every 1 to 2 hours.
• Leash Attachment: Do not attach a leash to the training collar. Use a separate, non-metallic collar for leash attachment.
• Children: Keep the training system and its components out of reach of children.
• Water Safety: While the collar receiver is waterproof, ensure the charging port is securely sealed before exposing it to water.

Package Contents

The image above displays the complete contents of the PetSpy M86-2 Dog Training Collar package.

• Remote Transmitter
• 2x Collar Receivers
• 2x Adjustable TPU Straps (one orange, one black)
• Dual USB Charger
• Test Bulb
• 2x Sets of Metal Probes (short and long)
• User Guide (this manual)

Product Overview

This image shows the PetSpy M86-2 remote transmitter alongside two collar receivers, one with an orange strap and one with a black strap. The system is designed for training up to two dogs simultaneously.

Remote Transmitter Functions:

The diagram illustrates the remote transmitter and collar receiver functions. The remote features various buttons for different modes, and the collar receiver supports sound, vibration, and static shock modes.

1. Charging Port
2. Remote Beep Button
3. Vibration Button
4. Menu/Training Mode Button (to switch between dogs A/B and adjust levels)
5. Static Shock Button
6. Collar Beep Indicator (on remote display)

Collar Receiver Features:

• Waterproof design for various environments.
• Rechargeable battery for convenience.
• Adjustable TPU strap to fit different neck sizes.
• Contact points for static stimulation.
• Power saving mode with movement sensor to conserve battery.

Setup and Initial Use

1. Charging the Devices

Before first use, fully charge the remote transmitter and both collar receivers. Connect the dual USB charger to a power source and plug it into the charging ports of the devices. The indicator lights will typically turn solid green or off when charging is complete.

2. Pairing the Remote and Collars

To ensure the remote communicates with the correct collar, follow the pairing instructions provided in the detailed user guide included in your package. This usually involves turning on the collar receiver and pressing a specific button on the remote within a short time frame to establish a connection for Dog A and Dog B.

3. Fitting the Collar

This image illustrates essential use and care tips for the training collar, including proper fit and maintenance practices.

1. Ensure the collar is positioned correctly on your dog's neck, with the contact points touching the skin.
2. The fit should be snug enough for the contact points to make reliable contact, but not so tight as to restrict breathing or cause discomfort. You should be able to fit two fingers comfortably between the collar and your dog's neck.
3. Trim long fur if necessary to ensure proper contact between the probes and your dog's skin.
4. Select the appropriate length metal probes (short or long) based on your dog's coat type to ensure effective contact.

Operating the Training Collar

Training Modes:

• Beep (Tone): Delivers an audible tone. This mode is often used as a warning, an attention-getting signal, or a positive reinforcement marker.
• Vibration: Provides a non-harmful vibration. It can be used as a mild correction, a precursor to static stimulation, or a silent recall signal.
• Static Shock: Delivers a static stimulation. This mode should be used as a last resort for correcting undesirable behaviors and always at the lowest effective level.

Selecting a Dog (A/B Mode):

The remote transmitter allows you to switch between training Dog A and Dog B. Refer to the remote's display to confirm which dog is currently selected before issuing a command. This ensures you are communicating with the intended dog.

Adjusting Intensity Levels:

Both the vibration and static shock modes have adjustable intensity levels. Always start at the lowest level and gradually increase until your dog responds with a noticeable reaction, such as a head turn or ear twitch. The goal is to get your dog's attention and interrupt behavior, not to cause pain or fear.

Basic Training Principles:

This image shows a woman using the PetSpy M86-2 remote to train a small dog outdoors, demonstrating the practical application of the device in a training scenario.

A close-up view of a small dog wearing the PetSpy M86-2 training collar, with a person's hand holding the remote transmitter nearby. This highlights the interaction between the trainer, the remote, and the dog wearing the collar.

Effective training requires consistency, patience, and positive reinforcement. Use the collar to interrupt undesirable behaviors or reinforce commands. Always follow a correction with praise or a reward when your dog performs the desired action. Short, frequent training sessions are more effective than long, infrequent ones.

Maintenance and Care

• Cleaning: Regularly clean the collar receiver and the dog's neck area to prevent skin irritation. Use a damp cloth for the receiver and ensure it is dry before charging.
• Storage: Store the device in a dry place, away from direct sunlight, extreme temperatures, and corrosive materials.
• Contact Points: Periodically check the contact points for wear and ensure they are clean. Cover contact points with the provided silicone caps when not in use or if your dog has sensitive skin to minimize direct contact.
• Battery Life: Recharge the devices when the battery indicator shows low power to ensure consistent performance.

Troubleshooting

Specifications

• Model: M86-2
• Range: Up to 1100 yards (actual range may vary based on terrain, weather, and environmental factors)
• Training Modes: Beep, Vibration, Static Shock
• Waterproof: Yes (Collar Receiver)
• Battery: Rechargeable (Nonstandard Battery)
• Target Audience: Adult dogs, suitable for Medium to Large Breeds
• Material: Nylon (Strap)
• Item Weight: Approximately 10.6 ounces (total package)
• Dimensions (Remote): Approximately 1.5 x 3 x 6 inches
• Date First Available: November 14, 2015

Warranty and Support

For warranty information, technical support, or any questions regarding your PetSpy M86-2 Dog Training Collar, please visit the official PetSpy website or contact their customer service department. Contact details are typically provided in the product packaging or on the manufacturer's website.

You can also visit the PetSpy Store on Amazon for additional information and support resources.