PROFLO PFWO900

Download PDF
Contents

PROFLO PFWO900 Waste and Overflow Lift and Turn Stopper

Model: PFWO900 | Brand: PROFLO

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your PROFLO PFWO900 Waste and Overflow Lift and Turn Stopper. Please read this manual thoroughly before installation and keep it for future reference.

Product Overview

The PROFLO PFWO900 is a durable and reliable waste and overflow stopper designed for bathtubs. Its lift and turn mechanism provides convenient control over water drainage.

PROFLO PFWO900 Waste and Overflow Stopper, front view

Figure 1: Front view of the PROFLO PFWO900 Waste and Overflow Stopper, showcasing its chrome finish and lift-and-turn knob.

PROFLO PFWO900 Waste and Overflow Stopper, angled view

Figure 2: Angled view of the PROFLO PFWO900 Stopper, highlighting the underside components and brass stem.

Key Features:

  • Constructed of brass and zinc, ensuring durability and dependability.
  • Chrome finish designed to resist rust and corrosion through everyday use.
  • Lift and turn mechanism for easy operation.

Setup and Installation

Installation of the PROFLO PFWO900 stopper typically involves integrating it with a compatible waste and overflow drain assembly. Professional installation is recommended for optimal performance and to ensure compliance with local plumbing codes.

  1. Preparation: Ensure the bathtub drain opening is clean and free of debris. Verify that all necessary components of your waste and overflow assembly are present.
  2. Seal Application: Apply plumber's putty or a silicone sealant around the flange of the stopper to create a watertight seal with the bathtub surface.
  3. Insert Stopper: Carefully insert the stopper assembly into the drain opening.
  4. Secure Connection: From underneath the tub, connect the stopper assembly to the rest of the waste and overflow drain system, tightening all connections securely but without overtightening.
  5. Test for Leaks: Fill the bathtub with water and check for any leaks around the drain and overflow connections. Address any leaks immediately.

Note: This stopper is designed to be part of a complete waste and overflow assembly. Ensure compatibility with your existing or new drain system.

Operating Instructions

The PROFLO PFWO900 features a simple lift and turn mechanism for controlling water drainage.

  • To Close the Drain: Lift the knob on the stopper slightly and turn it to engage the sealing mechanism. The stopper will drop into place, sealing the drain.
  • To Open the Drain: Lift the knob on the stopper slightly and turn it in the opposite direction to disengage the sealing mechanism. The stopper will rise, allowing water to drain.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your PROFLO PFWO900 stopper.

  • Cleaning: Clean the chrome finish regularly with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or strong detergents, as these can damage the finish.
  • Mechanism Check: Periodically check the lift and turn mechanism for smooth operation. If it becomes stiff, a small amount of silicone-based lubricant can be applied to the moving parts, ensuring it does not come into contact with the sealing gasket.
  • Gasket Inspection: Inspect the rubber gasket around the stopper for any signs of wear or damage. A worn gasket can lead to leaks and may need replacement.

Troubleshooting

If you encounter issues with your PROFLO PFWO900 stopper, refer to the following common problems and solutions:

Problem Possible Cause Solution
Stopper does not seal properly / Leaks Worn or misaligned gasket; debris under stopper; improper installation. Clean under the stopper; inspect and replace gasket if worn; re-check installation for proper sealing.
Stopper is stiff or difficult to turn Mineral buildup; lack of lubrication; internal mechanism issue. Clean the mechanism; apply silicone lubricant; if problem persists, consider professional inspection.
Chrome finish appears dull or stained Hard water spots; use of abrasive cleaners. Clean with a soft cloth and mild cleaner; avoid abrasive materials.

If the issue persists after attempting these solutions, please contact PROFLO customer support or a qualified plumber.

Specifications

Attribute Detail
Model Number PFWO900
Brand PROFLO
Material Brass and Zinc
Finish Chrome
Item Weight 0.16 Pounds (approx. 0.07 kg)
Included Components Stopper Only
UPC 781889212448
ASIN B017EKZYZO

Warranty Information

PROFLO products are manufactured to high-quality standards. For specific warranty details regarding your PFWO900 Waste and Overflow Lift and Turn Stopper, please refer to the warranty documentation included with your purchase or visit the official PROFLO website. Keep your proof of purchase for warranty claims.

Customer Support

For technical assistance, replacement parts, or any questions not covered in this manual, please contact PROFLO customer support. You can typically find contact information on the product packaging or the official PROFLO website.

When contacting support, please have your product model number (PFWO900) and purchase date readily available.

© 2024 PROFLO. All rights reserved.

This manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.