ASUS Q170M-C/CSM

Download PDF
Contents

ASUS Q170M-C/CSM Micro ATX Motherboard Instruction Manual

Model: Q170M-C/CSM

1. Introduction

The ASUS Q170M-C/CSM is a Micro ATX motherboard designed for Intel LGA 1151 processors, supporting DDR4 memory. It features industry-leading 5X Protection II for enhanced durability and stability, utilizing high-quality components and circuit design. The motherboard also incorporates ASUS LANGuard for reliable networking with improved surge protection. This manual provides essential information for setting up, operating, and maintaining your motherboard.

ASUS Q170M-C/CSM Micro ATX Motherboard

Figure 1: ASUS Q170M-C/CSM Micro ATX Motherboard overview.

2. Setup

2.1 Unboxing and Package Contents

Before beginning installation, carefully unpack your motherboard and verify all components are present. The package should include:

  • Motherboard - micro ATX
  • 2 x Serial ATA cable
  • I/O back plate
  • Software

Ensure the I/O back plate is installed into your PC case before mounting the motherboard.

2.2 CPU Installation (LGA 1151)

This motherboard supports Intel LGA 1151 processors, including Intel Core i3, i5, i7, i9, Pentium, and Celeron (6th, 7th, 8th, 9th generations). Follow these steps for proper installation:

  1. Locate the CPU socket on the motherboard.
  2. Lift the load lever and open the CPU socket cover.
  3. Carefully align the notches on your Intel LGA 1151 processor with the keys on the socket. Ensure the gold triangle on the CPU aligns with the triangle on the socket.
  4. Gently place the CPU into the socket. Do not force it.
  5. Close the socket cover and push down the load lever until it locks into place.
  6. Install your CPU cooler according to its manufacturer's instructions.

2.3 RAM Installation (DDR4)

The motherboard features four DDR4 DIMM slots, supporting up to 128GB of SDRAM at speeds up to 2133 MHz. For optimal performance, refer to the motherboard's Qualified Vendor List (QVL) on the ASUS support website to ensure compatibility and stability of your chosen memory modules.

  1. Open the retention clips on both ends of the DIMM slot.
  2. Align the notch on the DDR4 memory module with the key in the DIMM slot.
  3. Insert the memory module firmly into the slot until the retention clips snap into place.
  4. Repeat for additional memory modules, ensuring proper dual-channel configuration if applicable (refer to your motherboard manual for specific slot pairing).

2.4 Storage Device Installation

The motherboard supports various storage options:

  • SATA Ports: Connect up to six SATA 6Gb/s devices (e.g., HDDs, SSDs) using the provided SATA cables.
  • M.2 Slots: This motherboard may feature M.2 slots for high-speed NVMe SSDs. Refer to the detailed specifications for M.2 slot capabilities and installation instructions, including securing with screws.

2.5 PCIe Expansion Card Installation

The motherboard includes PCIe slots for expansion cards such as graphics cards, sound cards, or network cards. The primary PCIe x16 slot is designed for graphics cards. Ensure your card is properly seated and secured with the case's retention mechanism.

2.6 Power Connections

Connect the main 24-pin ATX power connector and the 8-pin ATX 12V power connector from your power supply to the corresponding ports on the motherboard. Ensure all power connections are secure to provide stable power to your components.

2.7 Front Panel and Internal Headers

Connect your PC case's front panel connectors (power button, reset button, USB ports, audio jacks) to the appropriate headers on the motherboard. Consult your motherboard manual for exact pin layouts. This model includes multiple USB 2.0 and USB 3.0 headers for front panel connectivity.

3. Operating

Once all components are installed and connected, you can power on your system. The motherboard's robust design, including 5X Protection II, ensures stable operation. Install your operating system and necessary drivers (available on the ASUS support website or included software CD) for full functionality. Regular driver updates are recommended for optimal performance and security.

4. Maintenance

Proper maintenance extends the lifespan of your motherboard and ensures consistent performance:

  • Dust Removal: Regularly clean dust from your PC case and motherboard components using compressed air. Ensure the system is powered off and unplugged before cleaning.
  • BIOS/UEFI Updates: Keep your BIOS/UEFI firmware updated. Check the ASUS support website for the latest versions and follow the update instructions carefully.
  • Driver Updates: Ensure all device drivers (chipset, audio, LAN, etc.) are up-to-date.
  • Temperature Monitoring: Monitor system temperatures, especially for the CPU and chipset, to prevent overheating. Ensure adequate airflow within your PC case.

5. Troubleshooting

If you encounter issues, consider the following basic troubleshooting steps:

  • No Power: Verify all power cables (24-pin ATX, 8-pin ATX 12V) are securely connected. Check your power supply and wall outlet.
  • No Display: Ensure your monitor is connected to the graphics card (or integrated graphics port if applicable) and powered on. Reseat your graphics card and RAM modules.
  • System Instability/Crashes: This can often be related to RAM. Ensure RAM modules are correctly seated and compatible (check QVL). Test with one RAM stick at a time. Check CPU and GPU temperatures.
  • Peripheral Issues: If a USB device or other peripheral is not working, try a different port or ensure drivers are installed.
  • BIOS Reset: If the system fails to boot after configuration changes, try clearing the CMOS (Complementary Metal-Oxide-Semiconductor) by removing the CMOS battery for a few minutes or using the Clear CMOS jumper (refer to your manual for location).

For more detailed troubleshooting or persistent issues, refer to the comprehensive user manual available on the ASUS support website or contact ASUS technical support.

6. Specifications

ASUS Q170M-C/CSM Motherboard Key Specifications
FeatureDetail
BrandASUS
Model NameQ170M-C/CSM
Form FactorMicro ATX
CPU SocketLGA 1151
Compatible ProcessorsIntel Core i3, i5, i7, i9, Pentium, Celeron (6th, 7th, 8th, 9th generations)
Chipset TypeIntel Q170
RAM Memory TechnologySDRAM (DDR4)
Memory Speed2133 MHz
Max RAM Capacity128 GB
USB 2.0 Ports4 (Internal headers)
USB 3.0 Ports6 (Internal headers and rear I/O)
Product Dimensions (LxWxH)10.2 x 10.6 x 2 inches
Item Weight1.56 pounds
First Available DateOctober 30, 2015

7. Warranty and Support

Specific warranty details are not provided in this document. For information regarding warranty coverage, technical support, driver downloads, and additional resources, please visit the official ASUS support website or contact their customer service. Keep your purchase receipt for warranty claims.

ASUS Support Website: www.asus.com/support/

No official product videos specifically for the ASUS Q170M-C/CSM motherboard were found from a "Seller" creator type in the provided data. Please refer to the ASUS support website for any available media or guides.

© 2026 ASUS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.