NEEWER 700W Equivalent Softbox Lighting Kit NK200

1. Introduction

This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your NEEWER 700W Equivalent Softbox Lighting Kit. Designed for photography and video production, this kit offers continuous, soft, and even illumination for various applications, including product photography, portraiture, and studio work.

Please read this manual thoroughly before using the product to ensure safe and optimal performance.

2. Package Contents

Verify that all items listed below are included in your package:

• (2) 24"x24" (60x60cm) Softboxes
• (2) 35W 5700K UL Certified LED Light Bulbs (equivalent to 700W incandescent bulbs total)
• (2) 83" (210cm) Light Stands
• (1) Carrying Bag

Image: Overview of the NEEWER 700W Equivalent Softbox Lighting Kit components.

3. Safety Instructions

• Always ensure the power is off and the plug is disconnected from the outlet before assembly, disassembly, or maintenance.
• Do not operate the lighting kit with wet hands or in damp environments.
• Ensure the light stand is stable and securely positioned to prevent tipping.
• Avoid direct eye exposure to the LED light bulbs when illuminated.
• Keep the product away from water, flammable materials, and excessive heat.
• Use only the specified light bulbs and accessories provided or recommended by NEEWER.
• Do not attempt to modify or repair the unit yourself. Contact qualified service personnel for assistance.

4. Assembly

4.1. Light Stand Setup

1. Unfold the light stand legs to create a stable base.
2. Extend the telescopic sections of the stand to your desired height, securing each section with the quick single-action locks.

4.2. Softbox Assembly

1. Attach the softbox to the top of the light stand by aligning the mounting hole with the stand's spigot and tightening the adjustment knob.
2. Gently push the center rod of the softbox until it locks into place, expanding the softbox into its square shape.
3. Screw the 35W 5700K LED light bulb into the E26 socket located inside the softbox.
4. Attach the white diffuser cover to the front of the softbox using the Velcro fasteners to soften the light output.

Image: Softbox interior with nylon reflector and the white diffuser cover attachment points.

4.3. Visual Assembly Guide

Watch the following video for a visual demonstration of the assembly process:

Video: A seller demonstrates the assembly of the NEEWER 700W Softbox Lighting Kit, including setting up the stand, attaching the softbox, and inserting the bulb.

5. Operating Instructions

5.1. Powering On/Off

Plug the power cord into a standard E26 socket. Use the inline switch on the power cord to turn the light on or off.

5.2. Adjusting Softbox Angle

The softbox features an adjustable lamp holder, allowing you to tilt the softbox up to 210 degrees to direct light as needed. Loosen the adjustment knob on the light stand, position the softbox, and then re-tighten the knob to secure it.

Image: Illustration of the softbox's adjustable angle mechanism.

5.3. Light Output

The included 35W 5700K LED bulbs provide a bright, daylight-balanced light suitable for various photography and video needs. The white diffuser cover ensures soft, even illumination, minimizing harsh shadows.

Image: Demonstrating the soft, even lighting provided by the softbox compared to direct light.

6. Care and Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the softbox and light stand. For the diffuser, a slightly damp cloth can be used, but ensure it is completely dry before storage. Do not use abrasive cleaners or solvents.
• Bulb Replacement: Ensure the power is off and the bulb has cooled completely before attempting to replace it. Screw in a new E26 base LED bulb of appropriate wattage.
• Storage: Disassemble the kit and store all components in the provided carrying bag in a cool, dry place away from direct sunlight and moisture.

7. Troubleshooting

• Light not turning on:
  • Check if the power cord is securely plugged into a working electrical outlet.
  • Ensure the inline switch on the power cord is in the "On" position.
  • Verify that the LED bulb is correctly screwed into the E26 socket.
  • Test the bulb in another working fixture to confirm it is not faulty.
• Light stand unstable:
  • Ensure the light stand legs are fully extended and spread out to their maximum stable width.
  • Tighten all locking knobs on the light stand sections.
  • Avoid placing the stand on uneven surfaces.
• Softbox not opening correctly:
  • Ensure the center rod is pushed firmly until it clicks into its locked position.
  • Check for any obstructions preventing the softbox from fully expanding.

8. Specifications

9. Warranty and Support

For warranty information, technical support, or any inquiries regarding your NEEWER 700W Equivalent Softbox Lighting Kit, please refer to the official NEEWER website or contact their customer service directly. Keep your purchase receipt for warranty claims.

Online resources and FAQs may also be available on the NEEWER Brand Store.