Introduction
This manual provides instructions for the proper use and care of your Salton replacement power cord. This cord is designed to replace lost or damaged power cords for specific Salton Hotray and Bun Warmer models. Please read these instructions carefully before use to ensure safe and correct operation.
Product Compatibility
This replacement power cord is compatible with the following Salton Hotray and Bun Warmer models. It is essential to verify your appliance's model number before use to ensure proper fit and function.
- ER-1, ES99, BH-5, H-109, H-110, H-115, H-115A, H-116, H-116W
- H-120 Series A, F, & C, H-121, H-122, H-123, H-124, H-125, H-127
- H-130, H-130S, H-130D, H-132, H-134, H-324, H-420, H-430, H-435, H-450
- H-727, H-820, H-900, H-907, H-910, H-920, H-922, H-922A, H-924, H-925
- H-926, H-928, H-930, H-931, H-934, H-935, H-940, H-940A, H-1005
- WB-2, WB-3, WB-4, WB-5, WB-5-D, WB-6, WB-7, WB-8, WB-10
Note: This cord does not fit Salton Hotray Carts.
Important Safety Instructions
- Always ensure the appliance is turned off and unplugged before connecting or disconnecting the power cord.
- Do not use the power cord if it is damaged, frayed, or has exposed wires.
- Keep the power cord away from hot surfaces, water, and sharp edges.
- Do not attempt to modify the power cord or use it for purposes other than its intended use with compatible Salton appliances.
- Ensure the power outlet matches the voltage requirements of your appliance.
Connecting the Power Cord
- Identify the power input receptacle on your Salton Hotray or Bun Warmer. This is typically a two-pin female connector.
- Align the female end of the replacement power cord with the appliance's power input. The pin spacing on the cord is 5/16" center to center.
- Gently push the cord's connector firmly into the appliance's receptacle until it is fully seated.
- Plug the two-prong male end of the power cord into a standard electrical outlet.
Operation
Once the power cord is securely connected to both the appliance and a power outlet, your Salton Hotray or Bun Warmer is ready for operation according to its original manufacturer's instructions. Refer to your appliance's specific manual for operational details.
Maintenance and Care
- Disconnect the power cord from the outlet and the appliance when not in use.
- Clean the cord with a soft, dry cloth. Do not immerse in water or use abrasive cleaners.
- Store the power cord in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid tightly coiling or bending the cord sharply, as this can damage the internal wiring.
Troubleshooting
| Problem | Solution |
|---|---|
| Cord does not fit the appliance. | Verify your appliance's model number against the compatible models list. Ensure the pin spacing on your appliance matches the 5/16" spacing of this cord. This cord is not compatible with Salton Hotray Carts. |
| Appliance does not power on after connecting the cord. | Ensure the cord is fully inserted into both the appliance and the wall outlet. Check if the wall outlet is functional by plugging in another device. Inspect the cord for any visible damage. If the cord is damaged, discontinue use and replace it. |
| Cord feels hot during use. | Immediately unplug the cord from the wall outlet and the appliance. Discontinue use and inspect for damage. Contact customer support if the issue persists with an undamaged cord. |
Product Specifications
- Type: Replacement Power Cord
- Brand: Salton (Aftermarket)
- Color: Brown
- Connector Type: Male-to-Female, 2-prong
- Pin Spacing: 5/16" center to center
- UL Listed: No
- Item Weight: 3.99 ounces
- Package Dimensions: 5.9 x 1.9 x 1.4 inches
Customer Support
For further assistance or inquiries regarding this replacement power cord, please contact the seller directly through the platform where it was purchased.
For support related to your Salton appliance, please refer to the original appliance manual or contact Salton customer service.