Introduction
Welcome to the Alla Lighting T10 Wedge 168 194 LED Bulbs instruction manual. These high-performance LED bulbs are designed to replace various incandescent lamps in your vehicle, offering superior brightness, energy efficiency, and a longer lifespan. This manual will guide you through the product features, installation process, and general care to ensure optimal performance and satisfaction.
Product Features
- High Illumination: Each bulb provides 250 lumens, totaling 500 lumens for a pair, significantly brighter than standard incandescent lamps.
- Advanced LED Technology: Equipped with 18 pieces of high-power and high-quality 3014 SMD LED chips.
- Color: Amber Yellow, providing a distinct and bright signal.
- Voltage: Operates within 12V - 18V DC, featuring built-in current resistance for stable performance.
- Wide Beam Angle: Offers a full 360° view angle for comprehensive light distribution.
- Safe Operation: Produces no UV or IR radiation.
- Easy Installation: Designed for plug-and-play installation with non-polarity, simplifying the replacement process.
- Energy Efficient: Low power consumption and low operating temperature contribute to energy savings.
- Long Lifespan: Engineered for a lifespan of up to 30,000 hours, reducing the need for frequent replacements.
Compatibility and Applications
These T10 Wedge LED bulbs are direct replacements for a wide range of incandescent bulb types and can be used in various vehicle lighting applications, depending on your vehicle's trim and specific requirements.
Compatible Bulb Types:
- 158, 161, 168, 168A, 168NA, 175, 194, 194NA, 2821, 2825, 2827
- 147, 152, 159, 555, 558, 585, 906, 912, 921, 1250, 1251, 2886X, 3652, 658
- PC168, PC175, PC194, PC195, W5W, W5WLL, 2825L, W10W
Common Applications:
- Exterior Turn Signal Lights
- License Plate Lights
- Side Marker Lights
- Side Door Courtesy Lights
- Interior Map Lights
- Dome Lights
- Parking City Lights
- Glove Box Lights
- Trunk Cargo/Room Lights
- Stepwell Lights
- Luggage Compartment Lights
- Inner Tail Light Bulbs
Installation Instructions
Installation of Alla Lighting T10 Wedge LED bulbs is a straightforward plug-and-play process. Always ensure the vehicle's power is off before beginning installation to prevent electrical issues.
General Steps:
- Locate the Bulb: Identify the incandescent bulb you wish to replace. Refer to your vehicle's owner's manual for specific bulb locations.
- Remove the Cover: Carefully remove any protective covers, lens, or housing around the bulb. This may require a trim removal tool or a small screwdriver.
- Remove the Old Bulb: Gently pull the old halogen bulb straight out from its socket. Be cautious as it may be hot if recently used.
- Insert the LED Bulb: Insert the new Alla Lighting LED bulb into the socket. These bulbs are non-polarity, meaning they will work regardless of orientation. Push straight in until it is seated firmly.
- Test Functionality: Turn on the vehicle's power and test the new LED bulb to ensure it illuminates correctly.
- Replace Cover: Once confirmed working, replace any covers or housing removed in step 2.
Visual Installation Guide:
Video demonstrating the installation process of Alla Lighting T10 LED bulbs for interior dome lights, showing removal of cover, old bulb, and insertion of new LED bulb.
Video showcasing the installation of Alla Lighting T10 LED bulbs as exterior marker or signal lights, highlighting the brightness comparison with standard bulbs.
Operation
Alla Lighting T10 Wedge LED bulbs provide instant-on, 360-degree amber yellow light output. They are designed for consistent performance within the specified voltage range of 12V-18V DC. Once installed, the bulbs will operate in conjunction with your vehicle's existing lighting system, providing enhanced visibility and a modern aesthetic.
Maintenance
These LED bulbs are designed for a long lifespan of up to 30,000 hours and require minimal maintenance. Unlike traditional halogen bulbs, they do not have filaments that can burn out, significantly reducing the need for frequent replacements. To ensure optimal light output, periodically clean the bulb and surrounding lens from any accumulated dirt or debris using a soft, dry cloth.
Troubleshooting
Bulb Does Not Light Up:
- Ensure the vehicle's power is on and the light switch is in the correct position.
- Check the connection: Ensure the LED bulb is fully and securely inserted into the socket. A loose connection can prevent illumination.
- Verify correct bulb type: Confirm that the T10 Wedge bulb is the correct type for your vehicle's specific application.
- Check vehicle fuse: Inspect the relevant fuse in your vehicle's fuse box. A blown fuse can prevent power from reaching the bulb.
Hyper Flashing (for turn signals):
- If these bulbs are used as turn signals, some vehicles may experience hyper flashing (rapid blinking) due to the lower power consumption of LED bulbs compared to incandescent ones. This can typically be resolved by installing load resistors (sold separately) or an LED-compatible flasher relay.
Technical Specifications
| Specification | Detail |
|---|---|
| Brand | Alla Lighting |
| Light Source Type | LED |
| Color | Amber Yellow |
| Color Temperature | 2000 Kelvin |
| Brightness | 250 Lumens per bulb |
| Wattage | 1.5 watts |
| Voltage | 12V - 18V DC |
| Base Type | T10 Wedge |
| LED Type | 3014 SMD (18 chips) |
| Lifespan | Up to 30,000 Hours |
| Manufacturer Part Number | ALL-T10-3014-18Y |
| Package Quantity | 2 Count |
Warranty and Support
Alla Lighting provides a ONE YEAR warranty for manufacturer quality on these T10 Wedge LED bulbs. This warranty covers defects in materials and workmanship under normal use. For any warranty claims, technical assistance, or product support, please contact Alla Lighting directly through their official channels or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.
