Prolux CV12000 Central Vacuum Power Unit Instruction Manual

1. Introduction

This manual provides essential information for the safe and efficient operation of your Prolux CV12000 Central Vacuum Power Unit. Please read thoroughly before installation and use.

The Prolux CV12000 is a powerful central vacuum system designed to enhance home air quality by effectively removing dirt and allergens. It features a robust 2-stage motor and a bagless, multi-level filtration system for sustained performance.

2. Product Features

• Powerful Amtek 2-Stage Motor: Delivers over 130 Cubic Feet per Minute (CFM) of airflow, suitable for homes up to 12,000 square feet. Designed with a bypass system for extended lifespan.
• Bagless Filtration System: Features 3 levels of filtration including a clear-view dirt chamber, a washable Micron Pre-Filter, and a washable HEPA filter. The HEPA filter removes 99.97% of dust and allergen micro-particles. For external exhaust, the HEPA filter can be removed to maximize suction.
• Durable Construction: Built with powder-coated steel for longevity.
• Integrated Garage Vacuum Port: Allows for direct connection of a hose for cleaning vehicles or garage spaces.
• Quiet Operation: Includes an external muffler for noise reduction. The muffler can be removed if a blowing or inflating hose is connected.
• Dual Piping Ports: Facilitates easy installation and allows for two sets of piping.

3. What's Included

The Prolux CV12000 Central Vacuum Power Unit includes the following components:

• Prolux CV12000 Vacuum Unit (Red)
• HEPA Filter (installed)
• Washable Micron Pre-Filter (installed)
• Wall Mount Kit
• External Muffler
• Various cleaning attachments (e.g., floor brushes, crevice tool, upholstery tool)
• Hose (length may vary based on package, typically 30 feet for full coverage)

4. Setup and Installation

The Prolux CV12000 is designed for wall-mount installation. Ensure you select a suitable location with adequate support for the unit's weight (22 pounds, plus collected debris).

1. Choose Location: Select a wall in your garage or utility room that can support the unit. Consider proximity to existing central vacuum piping and electrical outlets.
2. Mounting Bracket: Secure the provided wall mount kit to the wall using appropriate fasteners for your wall type (e.g., studs, masonry).
3. Hang the Unit: Carefully lift and hang the vacuum unit onto the installed mounting bracket.
4. Connect Piping: Connect the central vacuum piping from your home to the unit's intake ports. The unit features dual piping ports for flexible installation.
5. Connect Power: Plug the power cord into a standard electrical outlet.
6. Attach Hose Holder: Install the hose holder (if included) near the unit for convenient storage.

Installation Video

Video 1: Unboxing and Installation of a Prolux Garage Wall Mounted Vacuum. This video demonstrates the unboxing process, identifies included components, and provides a step-by-step guide for mounting the vacuum unit on a brick wall, including tips for drilling into masonry.

5. Operating Instructions

1. Power On/Off: The unit is activated by a low-voltage switch, typically located on your central vacuum inlets.
2. Vacuuming: Insert the hose into an inlet. The unit will start automatically. Use appropriate attachments for the surface you are cleaning.
3. Blower Function: To use as a blower, connect the hose to the exhaust port (where the muffler is usually attached).

Demonstration Video: Vacuum and Blower Function

Video 2: Demonstration of the Prolux Garage Pro vacuum's vacuum and blower functions. This video shows how to switch the hose between the intake and exhaust ports to change between vacuuming and blowing modes, and demonstrates cleaning a car interior and garage floor.

Demonstration Video: Carpet Cleaning

Video 3: Demonstration of carpet cleaning using the Prolux Wet/Dry Garage Vac. This video shows how to use the included application tool to spray cleaner onto carpet and then use the extractor tool to remove the liquid, effectively cleaning stained carpet.

6. Maintenance

1. Emptying the Dirt Chamber: The clear-view dirt chamber allows you to see when it's full. Unclip the bottom bucket, remove the collection ring, and dispose of the contents.
2. Cleaning Filters: The Micron Pre-Filter and HEPA filter are washable. Refer to the user manual for detailed cleaning instructions.
3. Motor Maintenance: The Amtek 2-stage motor is designed for durability. Regular cleaning of filters helps maintain optimal performance.

7. Troubleshooting

If you encounter issues with your Prolux CV12000, please refer to the following common troubleshooting steps:

• Loss of Suction: Check if the dirt chamber is full and needs emptying. Inspect filters for clogging and clean if necessary. Ensure all hose connections are secure.
• Unit Not Starting: Verify the power cord is securely plugged into an active outlet. Check the low-voltage wiring for any disconnections.
• Unusual Noise: Inspect the motor area for any obstructions. Ensure the external muffler is properly attached if used.

8. Specifications

9. Warranty and Support

The Prolux CV12000 Central Vacuum Power Unit comes with a 10-year warranty.

Please note that failure to use genuine Prolux filtration bags, filters, and accessories with your Prolux appliance will immediately void your appliance warranty. The Prolux warranty does not apply to any non-Prolux branded products or services (including repairs).

For product help or support, please visit the Prolux Store or contact Prolux customer service.