Introduction
The SpeeCo Genuine Two Way Lockable Gate Latch (Part Number S16100100) is designed for secure and convenient gate operation in various settings, including farms, pastures, and ranches. This durable latch allows for one-handed operation and supports two-way gate swing, enhancing efficiency and safety. Its robust alloy steel construction with an anti-corrosion finish ensures long-lasting performance.
Product Overview

Figure 1: Front view of the SpeeCo Two Way Lockable Gate Latch. This image shows the main latch mechanism and the two-way locking arms.

Figure 2: The SpeeCo Two Way Lockable Gate Latch installed on a wooden post, securing a metal gate. A padlock can be seen attached for additional security.
The gate latch is constructed from durable alloy steel with an anti-corrosion finish, ensuring longevity even in outdoor environments. It is designed to fit 1-5/8 to 2-inch round tube gates and includes all necessary hardware for installation.
Setup and Installation
The SpeeCo Two Way Lockable Gate Latch is designed for straightforward installation. All required hardware is included in the package. It is compatible with 1-5/8 to 2-inch round tube gates. For smaller tube gates, a spacer is provided to ensure a secure fit.
Installation Steps:
- Prepare the Gate Post: Ensure the gate post is sturdy and capable of supporting the gate and latch mechanism.
- Attach the Latch Mechanism: Position the main latch mechanism on the gate post at the desired height. Use the provided bolts and nuts to securely fasten it. For wooden posts, ensure appropriate fasteners are used to prevent loosening over time.
- Attach the Gate Clamp: Secure the gate clamp to the gate's vertical tube. Adjust its position so that it aligns perfectly with the latch mechanism when the gate is closed. Use the included spacer if your gate tube is smaller than 2 inches.
- Test Operation: Once installed, test the gate's opening and closing to ensure smooth operation and secure latching.
For optimal security and to prevent animals from disengaging the latch, it is recommended to use a padlock or carabiner through the designated hole at the bottom of the latch mechanism (refer to Figure 2).
Operating Instructions
The SpeeCo Two Way Lockable Gate Latch is designed for ease of use, allowing for one-handed operation and two-way gate swing.
Opening the Gate:
- Disengage Latch: Lift the latch arm upwards with one hand.
- Open Gate: Push or pull the gate in the desired direction. The two-way design allows the gate to swing both inwards and outwards.
Closing the Gate:
- Simply push the gate closed. The latch mechanism is designed to automatically engage and secure the gate as it swings into place.
Locking the Gate:
- For added security, insert a padlock or carabiner through the designated hole located at the bottom of the latch mechanism (refer to Figure 2). This prevents the latch arm from being lifted.
Maintenance
To ensure the longevity and smooth operation of your SpeeCo Gate Latch, regular maintenance is recommended:
- Cleaning: Periodically clean the latch mechanism to remove dirt, debris, or rust buildup.
- Lubrication: Apply a suitable lubricant to moving parts, such as the latch arms and pivot points, to maintain smooth operation and prevent wear.
- Inspection: Regularly inspect the latch and mounting hardware for any signs of wear, damage, or loosening. Tighten any loose bolts or replace damaged components promptly.
- Anti-Corrosion: The latch features an anti-corrosion finish. However, in harsh environments, consider applying additional rust-preventative coatings if signs of corrosion appear.
Troubleshooting
If you encounter issues with your gate latch, consider the following common troubleshooting steps:
- Latch Not Engaging:
- Check for obstructions preventing the gate from closing fully.
- Ensure the gate clamp is properly aligned with the latch mechanism. Adjust if necessary.
- Inspect the latch arms for damage or excessive wear.
- Difficulty Opening/Closing:
- Lubricate all moving parts of the latch.
- Check if the gate hinges are stiff or damaged, affecting gate movement.
- Ensure no padlock is engaged if you intend to open the gate.
- Gate Sagging:
- While the latch helps prevent sagging, check the gate hinges and post for stability. Reinforce if needed.
Specifications
| Feature | Detail |
|---|---|
| Brand | SpeeCo |
| Model Name | Part Number S16100100 |
| Part Number | S16100100 |
| Material | Alloy Steel |
| Color | Blue |
| Special Feature | Anti-Corrosion |
| Lock Type | Padlock (compatible) |
| Item Dimensions (L x W x H) | 12 x 5 x 2 inches |
| Item Weight | 4.76 Pounds |
| Gate Compatibility | Fits 1-5/8 to 2 inch round tube gates |
Official Product Videos
Watch these official videos for demonstrations and additional information about the SpeeCo Two Way Lockable Gate Latch.
Video 1: Demonstration of the SpeeCo Two Way Latch Lock Gate, highlighting its one-handed operation and two-way swing functionality. This video also shows the padlock feature and ease of installation.
Video 2: A review and demonstration of the 2-way gate lock, showcasing its functionality and ease of use in a farm setting.
Video 3: An informative video detailing key aspects of the gate latch, including its robust construction and practical application.
Video 4: A demonstration highlighting the sturdy, reliable, and convenient features of the gate latch in a ranch environment.
Warranty and Support
Specific warranty information for the SpeeCo Genuine Two Way Lockable Gate Latch (S16100100) is not provided in this manual. Please refer to the product packaging or contact SpeeCo customer support for detailed warranty terms and conditions. For technical assistance or further inquiries, please visit the official SpeeCo website or contact their customer service department.