Bose Solo 10 Series II TV Sound System User Manual

Introduction

The Bose Solo 10 Series II TV Sound System is designed to enhance your television viewing experience by delivering clear, rich audio. This system provides a significant improvement over standard TV speakers, making dialogue more distinct and overall sound more immersive. Its compact design allows for versatile placement, fitting neatly under most televisions or on a shelf.

Package Contents

Before proceeding with setup, ensure all components are present:

• Bose Solo 10 Series II TV Sound System
• Remote Control
• Power Cord
• Optical Audio Cable
• Analog Audio Cable (RCA to 3.5mm)
• Documentation (this manual)

Note: Specific accessories may vary. Refer to your product packaging for exact contents.

Setup

Follow these steps to set up your Bose Solo 10 Series II TV Sound System:

1. Placement: Position the sound system directly under your television. It is designed to support TVs up to 46 to 50 inches. Alternatively, place it on a stable shelf near your TV. Ensure adequate ventilation around the unit.
2. Connect to TV:
   • Optical Connection (Recommended): Connect one end of the optical audio cable to the DIGITAL AUDIO OUT (OPTICAL) port on your TV and the other end to the OPTICAL IN port on the sound system.
   • Analog Connection (Alternative): If your TV does not have an optical output, connect the analog audio cable from your TV's AUDIO OUT (RCA) or headphone jack to the AUX IN port on the sound system.
3. Connect Power: Plug the power cord into the POWER port on the sound system, then plug the other end into a working AC power outlet.
4. Power On: The system will automatically power on when connected to power. The status indicator on the front will illuminate.

Operating Instructions

Control your Bose Solo 10 Series II TV Sound System using the provided remote control or the touch controls on the unit.

Remote Control Functions:

• Power Button: Turns the system on or off.
• Volume Up/Down: Adjusts the overall volume level.
• Mute Button: Silences the audio output.
• Bass Control: Adjusts the bass level to your preference. Use the dedicated bass control knob or buttons if available on your remote.
• Input Selection: If multiple audio sources are connected, use the input button to cycle through them (e.g., Optical, Aux).

Adjusting Bass:

The system features a control knob for bass adjustment. Rotate the knob to increase or decrease the bass output to suit your listening environment and content.

Maintenance

To ensure the longevity and optimal performance of your sound system, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the exterior surfaces of the sound system. Do not use liquid cleaners or solvents.
• Ventilation: Ensure that the ventilation openings are not blocked. Do not place the system on soft surfaces that may obstruct airflow.
• Storage: If storing the system for an extended period, disconnect it from power and store it in a cool, dry place.

Troubleshooting

Refer to the following table for common issues and their solutions:

Specifications

Warranty and Support

The Bose Solo 10 Series II TV Sound System comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Bose website.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Bose customer support through their official website or the contact information provided in your product documentation.

Online Resources: For additional information, FAQs, and software updates, visit www.bose.com/support.