EyezOn Envisalink EVL-4EZR IP Security Interface Module User Manual

1. Introduction

The EyezOn Envisalink EVL-4EZR is an advanced IP security interface module designed to integrate your existing DSC or Honeywell (Ademco) wired security system with modern smart home platforms. This module enables remote monitoring, control, and automation capabilities, enhancing your home's security and convenience through internet connectivity.

Figure 1: The Envisalink EVL-4EZR module, a powerful interface for smart home security.

2. Safety Information

Please read all safety instructions carefully before installation and operation. Failure to do so may result in damage to the device, property, or personal injury.

• Electrical Safety: Always disconnect power to your security panel before installing or servicing the EVL-4EZR module. Work with electrical components should only be performed by qualified personnel.
• Intended Use: This product is designed for home automation and convenience use only. It is NOT a fire or life safety device and is not suitable for life-safety critical applications.
• Environmental Conditions: Install the module in a dry, indoor environment, away from direct sunlight, extreme temperatures, and moisture.
• Component Handling: Handle the circuit board with care to avoid electrostatic discharge (ESD) damage.

3. Package Contents

Verify that all items are present in your package:

• EyezOn Envisalink EVL-4EZR IP Security Interface Module
• Power Supply (12V power brick)
• Wire labels
• Small screwdriver for terminal connections
• Jumper cables
• Piezo buzzer (for audible alerts)
• Standoffs for mounting
• Mounting screws

4. Product Features

• Universal Compatibility: Works with DSC PowerSeries (1555, 1555 MX, 1575, 5010 (832), 5020 (864), 1616, 1832, 1864) and Honeywell Vista Panels (Vista20P, 21iP, 15P, 10P, 128P, and 250P).
• IP Connectivity: Connects your wired alarm system to the internet for remote access and smart home integration.
• Secure Communication: Utilizes 128-bit encryption for a safe and reliable connection.
• Remote Control & Monitoring: View system status and control your security system from anywhere via smartphone apps or web portal.
• Activity Alerts: Receive real-time email or SMS notifications for zone activity and alarms through the EnvisAlerts Service.
• Smart Home Integration: Compatible with Amazon Alexa, Google Home, SmartThings, Home Assistant, Hubitat, OpenHAB, and Homebridge via its built-in TPI (Third Party Interface).
• Automatic Updates: TCP-IP based bus-level interface allows for easy network upgrades and automatic firmware updates.
• Expandability: Supports up to 8 partitions, 128 zones, and 128 users. Features 2 on-board high-powered PGM outputs (more available if needed).
• Mounting: Designed to mount in a standard security enclosure.
• UL/ULC Monitoring: Supports full UL/ULC alarm monitoring over IP.
• LTE Options: LTE communication options are available, including the Sidekick LTE Communicator for a dual-path alarm solution.
• Ethernet Support: Features 100 BaseT Ethernet support for reliable wired network connection.
• Remote Programming: Program your system remotely from the EyezOn Portal, eliminating the need for keypad programming.
• Event Logging: Provides full event logging for comprehensive activity tracking.

Figure 2: The EVL-4EZR module offers broad compatibility with various DSC and Honeywell Vista security panels.

Figure 3: Voice control is available through the EyezOn Alexa skill, allowing interaction with your security system.

5. Installation

Follow these steps to install your EVL-4EZR module:

1. Prepare Your Existing Alarm Panel:
   • Before beginning, ensure the power to your existing alarm panel is completely disconnected.
   • Carefully open your alarm panel enclosure.
   • If you are replacing an existing communicator, make sure to label all wires before disconnecting them. If you are connecting to a panel for the first time, identify which wires correspond to which window/door sensors.
2. Mount the EVL-4EZR Module:
   • Use the provided standoffs and screws to securely mount the EVL-4EZR module inside your alarm panel enclosure. Ensure the module is not in direct contact with any metal surfaces to prevent short circuits.
3. Connect Zone Wires:
   • Connect the wires from your window and door sensors to the corresponding screw terminals on the EVL-4EZR module. There are two wires per sensor; one typically goes to a 'G' (ground) terminal, and the other to a numbered zone terminal (1-12). The order of the two wires for a single sensor does not typically matter.
   • Use the provided small screwdriver to tighten the terminal screws.
   

   Figure 4: Ensure all wiring is secure and correctly terminated for a reliable connection.

4. Connect Piezo Buzzer (Optional):
   • If using the included piezo buzzer for audible alerts, connect its two wires to the 'GND' and 'OUT1' terminals on the EVL-4EZR module.
5. Network Connection:
   • Ethernet: Connect an Ethernet cable from your router to the RJ45 port on the EVL-4EZR module.
   • Wi-Fi: If using Wi-Fi, ensure your router is within range. You will configure Wi-Fi settings later via the Konnected app.
6. Power the Module:
   • Connect the 12V power brick to the module's power input.
   • Alternatively, if your Ethernet network supports Power over Ethernet (PoE), you can power the module directly through the Ethernet cable, eliminating the need for the 12V power brick.

   Video 1: Konnected - Make Any Wired Alarm System Smart. This video demonstrates how to integrate your wired alarm system with smart home platforms using Konnected devices, including wiring and app setup.
7. Download & Configure the Konnected App:
   • Download the Konnected Smart Home app from your device's app store (Google Play or iTunes Store).
   • Open the app and follow the on-screen instructions to connect your new device. If using Wi-Fi, you will enter your network SSID and password.
   • Register your device with the Konnected Cloud. If you don't have an account, you can create one during this step.
   • Define each zone by entering the zone number, zone type (e.g., Door, Window, Motion), and a descriptive name.
   • Sync the settings to your device. The module will reboot.
   

   Figure 5: The Konnected app allows you to receive activity alerts and manage your zones.

8. Integrate with Smart Home Platform (e.g., SmartThings):
   • In your SmartThings app, use the '+' button to add a new device. Search for 'Konnected' in the device list, select 'Other', then 'Konnected'.
   • Select a location and room for your Konnected devices.
   • Once connected, you will see a success screen listing your zone names.
   • Configure SmartThings Home Monitor by selecting the zones you wish to monitor for 'Arm (away)' and 'Arm (stay)' modes.

6. Operating

The EVL-4EZR module provides flexible operation through its dedicated app and integrated smart home platforms.

• Konnected App: Use the Konnected Smart Home app to view the real-time status of all your zones, arm/disarm your system, and receive instant notifications.
• Smart Home Platforms: Control your security system using your preferred smart home platform (e.g., SmartThings, Alexa, Google Home). You can create custom routines and automations. For example, set up a routine to turn on a light or sound the piezo buzzer when a specific window opens.
• Voice Control: Utilize voice commands through Amazon Alexa or Google Home to check the status of zones or arm/disarm your system.

Figure 6: The convenient app provides full remote control of all panel features across all partitions.

7. Maintenance

To ensure optimal performance and longevity of your EVL-4EZR module:

• Firmware Updates: The module is remotely upgradeable, ensuring you always have the latest features and security enhancements. Check the EyezOn website (www.eyezon.com) regularly for updates.
• Wiring Inspection: Periodically inspect all wiring connections to ensure they are secure and free from corrosion or damage.
• Battery Check: If your alarm panel uses a backup battery, ensure it is in good condition and replaced as recommended by the manufacturer.
• Cleanliness: Keep the module and enclosure free from dust and debris. Use a soft, dry cloth for cleaning.

8. Troubleshooting

If you encounter issues with your EVL-4EZR module, consider the following:

• No Power: Check the 12V power brick connection or ensure your PoE switch/router is providing power if using Ethernet.
• No Network Connectivity: Verify your Ethernet cable connection or reconfigure Wi-Fi settings in the Konnected app. Ensure your router is functioning correctly.
• Sensor Not Reporting: Check the wiring for the specific zone. Ensure the sensor is correctly configured in the Konnected app and synced to the device.
• Alarm Not Sounding: Verify the piezo buzzer connection and ensure any automations or routines for audible alerts are correctly configured in your smart home platform.
• App Issues: Ensure your Konnected app is up to date. Try restarting the app or your smartphone.
• Incompatible Communicator (DSC/Honeywell): Some newer versions of alarm panel firmware (e.g., DSC 10.XX) may not be compatible. Refer to the EyezOn website for specific compatibility notes.

9. Specifications

10. Warranty

Warranty information for the EyezOn Envisalink EVL-4EZR module is provided by the manufacturer. Please refer to the documentation included with your product or visit the official EyezOn website for detailed warranty terms and conditions.

Extended protection plans may be available for purchase separately. Check with your retailer for options.

11. Support

For further assistance, technical support, or inquiries, please contact EyezOn support:

• Email: enquiries@eyezon.com
• Phone: 647-503-3400
• Website: Visit www.eyezon.com for the latest updates, FAQs, and additional resources.