BRITA mypure P1 Integrated Water Filter System

Introduction

Thank you for choosing the BRITA mypure P1 Integrated Water Filter System. This system is designed to provide you with freshly filtered water directly from your tap, enhancing the taste of your beverages and protecting your appliances. The BRITA P1000 filter cartridge effectively reduces limescale, metals like lead and copper, and taste-impairing substances such as chlorine, while retaining beneficial minerals. This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your new water filter system.

Safety Information

Please read all safety instructions carefully before installing and operating the BRITA mypure P1 system.

• Ensure all connections are secure to prevent leaks.
• Do not expose the filter system to freezing temperatures.
• Only use genuine BRITA P1000 filter cartridges for optimal performance and safety.
• If you notice any unusual taste, odor, or discoloration in the filtered water, discontinue use and contact BRITA customer support.
• Keep packaging materials away from children.

Components Included

Your BRITA mypure P1 system package includes the following items:

• 1x BRITA kitchen tap (if included in your specific model)
• 1x P1000 filter cartridge
• 1x Filter head with three settings (depending on water quality)
• 1x Practical wall mount
• 4x Flexible hoses
• 2x Adapters
• 1x T-piece

Setup and Installation

The BRITA mypure P1 system is designed for easy installation, typically under your kitchen sink. No electrical connection is required.

1. Prepare the Installation Area: Ensure sufficient space under the sink for the filter head and cartridge. The filter head with cartridge measures approximately 117mm (W) x 108mm (D) x 265mm (H). When vertically installed with the wall bracket, dimensions are 137mm (W) x 130mm (D) x 265mm (H).
2. Mount the Filter Head: Use the provided wall mount to secure the filter head in a convenient location. The filter cartridge can be inserted horizontally or vertically into the filter head.
3. Connect Water Supply: Connect the flexible hoses and T-piece to your existing cold water supply and the BRITA tap (if applicable). Ensure all connections are tightened securely to prevent leaks.
4. Insert Filter Cartridge: Once the plumbing is connected, insert the P1000 filter cartridge into the filter head. Ensure it clicks into place.
5. Flush the System: Before first use, flush the system by running filtered water for a few minutes to remove any air and carbon fines.

Image Description: This image shows the BRITA mypure P1 filter system installed under a kitchen sink. The filter cartridge is mounted vertically using a wall bracket, connected to the water lines. Text on the image highlights "Easy installation" and "1 filter = up to 1200L per year". It demonstrates how the system integrates discreetly into your kitchen plumbing.

Operating Instructions

Using your BRITA mypure P1 system is straightforward.

• Filtered Water Dispensing: If your system includes a dedicated BRITA tap, simply open the tap to dispense freshly filtered water. If you are using an existing tap with a separate filter lever, activate the lever for filtered water.
• Cartridge Status Indicator: The BRITA kitchen mixer (if applicable) contains a handy cartridge status indicator. This indicator helps you monitor the filter's remaining capacity and signals when a replacement is due.
• Water Quality Adjustment: The filter head allows you to adapt the filter performance to your local water quality. Refer to the specific instructions provided with your filter head for details on adjusting these settings.

Image Description: This image displays the BRITA mypure P1 faucet, featuring a sleek chrome design. A small LED indicator is visible on the side of the faucet, which changes color (red, yellow, green) to show the filter's status.

Image Description: This diagram illustrates the multi-stage BRITA filtration technology. It shows a cross-section of the filter cartridge, highlighting how it reduces coarse particles, limescale and metals (like lead and copper), chlorine and taste-altering substances, and microparticles.

Maintenance

Regular maintenance, primarily filter cartridge replacement, ensures optimal performance of your BRITA mypure P1 system.

• Filter Cartridge Lifespan: The P1000 filter cartridge typically lasts up to 12 months or filters up to 1200 liters of water, depending on water hardness and usage.
• Replacing the Cartridge: When the cartridge status indicator signals a replacement is needed (e.g., changes color to red), simply click the old cartridge out of the filter head and insert a new one. No tools are usually required.
• Flushing After Replacement: After replacing the cartridge, flush the system for a few minutes to ensure proper operation and remove any air.

Image Description: This image shows the packaging for a single BRITA P1000 Refill Water Filter cartridge alongside the cartridge itself. The packaging clearly indicates "1x" and "P1000", emphasizing that this is a replacement filter for the system.

Troubleshooting

If you encounter issues with your BRITA mypure P1 system, refer to the following common problems and solutions:

Specifications

Key technical specifications for the BRITA mypure P1 Integrated Water Filter System:

Warranty and Support

BRITA stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your product or visit the official BRITA website.

For customer service, technical support, or inquiries regarding filter recycling, please contact BRITA customer support. BRITA offers online and telephone customer service.

Image Description: This image features the BRITA brand logo and highlights key company values and services. It states that products are "Produced in Europe", offers "Customer Service" (online and telephone), and promotes a "Filter Recycling Plan".

Image Description: This image displays contact information for HomeServe installation service, including a phone number (900 053 914) and website (www.brita.es). It notes that the service is "only for Spanish territory". Users outside Spain should consult their local BRITA website or distributor for installation services.

For more information, visit the official BRITA website: www.brita.com