1. Introduction
Thank you for purchasing the Edifier R1700BT Bluetooth Bookshelf Speakers. This manual provides essential information for the proper setup, operation, and maintenance of your new audio system. Please read it thoroughly before use to ensure optimal performance and longevity of your speakers.
2. Important Safety Instructions
- Read these instructions carefully.
- Keep these instructions for future reference.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
3. Package Contents
Upon unpacking, please ensure all items listed below are present and in good condition:
- Edifier R1700BT Active Speaker (with controls)
- Edifier R1700BT Passive Speaker
- Remote Control
- RCA-RCA Audio Cable
- 3.5mm-RCA Audio Cable
- Speaker Connecting Cable
- User Manual
Image: Contents of the Edifier R1700BT package, including the active and passive speakers, remote control, and all necessary audio cables.
4. Product Overview
The Edifier R1700BT speakers are active near-field studio monitors designed for high-quality audio reproduction. They feature a classic wood finish and offer versatile connectivity options.
4.1 Speaker Components
Image: A detailed view of the speaker's front, highlighting the 19mm silk dome tweeter and the 4-inch bass driver.
- Tweeter: 19mm silk dome tweeter for clear high frequencies.
- Woofer: 4-inch bass driver for rich, deep lows.
- Front-facing Bass Reflex Port: Enhances bass response.
4.2 Side Panel Controls (Active Speaker)
Image: The side panel of the active speaker, showing the treble, bass, and master volume controls.
- Treble Control: Adjusts high-frequency output.
- Bass Control: Adjusts low-frequency output.
- Master Volume Control: Adjusts overall volume and acts as an input selector (press to cycle through inputs).
4.3 Rear Panel Connections (Active Speaker)
Image: The back panel of the active speaker, displaying the PC In, AUX In, L Speaker Out, and power input.
- PC In: RCA input for connecting to a computer.
- AUX In: RCA input for connecting to other audio devices.
- L Speaker Out: Connects to the passive (left) speaker.
- Power Input: For connecting the power cord.
- Power Switch: To turn the speakers on or off.
5. Setup
5.1 Speaker Placement
For optimal sound, place the speakers on a stable, flat surface. Position them at ear level, forming an equilateral triangle with your listening position. The R1700BT speakers are designed with a slight upward angle to direct sound towards the listener.
Image: Example of speaker placement on a desktop for a personal computer setup.
5.2 Connecting the Speakers
- Connect the active speaker (right speaker) to the passive speaker (left speaker) using the provided speaker connecting cable. Ensure the connectors are firmly inserted.
- Connect the power cord to the active speaker's power input and then to a power outlet.
5.3 Connecting Audio Sources
The R1700BT offers multiple ways to connect your audio devices:
- PC Input: Use the RCA-RCA audio cable to connect your computer's audio output to the 'PC In' ports on the active speaker.
- AUX Input: Use the 3.5mm-RCA audio cable to connect devices like smartphones, tablets, or MP3 players to the 'AUX In' ports on the active speaker.
- Bluetooth Connection: For wireless audio streaming, refer to the 'Operating' section for Bluetooth pairing instructions.
6. Operating Instructions
6.1 Power On/Off
Flip the power switch on the rear panel of the active speaker to the 'ON' position to power on the speakers. Flip it to 'OFF' to power them down.
6.2 Adjusting Volume, Bass, and Treble
Use the knobs on the side panel of the active speaker to adjust the audio output:
- Rotate the Master Volume knob to increase or decrease the overall sound level.
- Rotate the Bass knob to adjust the low-frequency response.
- Rotate the Treble knob to adjust the high-frequency response.
6.3 Input Selection
Press the Master Volume knob to cycle through the available audio inputs: PC In, AUX In, and Bluetooth. The LED indicator on the active speaker will change color to indicate the selected input.
6.4 Bluetooth Pairing
- Turn on the speakers and select the Bluetooth input by pressing the Master Volume knob until the LED indicator flashes blue.
- On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available Bluetooth devices.
- Select 'EDIFIER R1700BT' from the list to pair. Once paired, the LED indicator will glow solid blue.
- You can now stream audio wirelessly to your speakers.
6.5 Remote Control Usage
Image: The compact remote control for the Edifier R1700BT speakers.
The included remote control allows you to conveniently manage your speakers from a distance:
- Mute Button: Mutes or unmutes the audio.
- Volume Up/Down: Adjusts the master volume.
- Bluetooth Button: Selects the Bluetooth input.
- Line In Button: Selects the AUX/PC input (cycles between them).
7. Maintenance
To ensure the longevity and optimal performance of your Edifier R1700BT speakers, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the speaker cabinets. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
- Dust Protection: Keep the speakers free from dust. You may use a soft brush or a vacuum cleaner with a soft brush attachment to gently clean the speaker grilles.
- Avoid Moisture: Do not expose the speakers to water or excessive moisture. If liquid spills on the speakers, immediately disconnect power and allow them to dry completely before re-use.
- Ventilation: Ensure adequate ventilation around the speakers to prevent overheating. Do not block the rear or side vents.
- Temperature: Avoid placing speakers in direct sunlight or near heat sources. Operate them within recommended temperature ranges.
8. Troubleshooting
If you encounter any issues with your Edifier R1700BT speakers, please refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound | No power; Incorrect input selected; Volume too low; Loose connections | Ensure power is on; Select correct input (PC, AUX, Bluetooth); Increase volume; Check all cables are securely connected. |
| Bluetooth connection fails | Speakers not in pairing mode; Device too far; Interference; Device already paired to another speaker | Ensure LED flashes blue; Move device closer; Reduce interference; Disconnect from other devices and try again. |
| Sound distortion | Volume too high; Source audio quality is poor; Incorrect bass/treble settings | Lower volume; Try a different audio source; Adjust bass/treble controls. |
| Remote control not working | Battery depleted; Obstruction between remote and speaker; Remote not pointed at IR receiver | Replace battery; Remove obstructions; Point remote directly at the active speaker's IR receiver. |
If the problem persists after trying these solutions, please contact Edifier customer support.
9. Specifications
Detailed technical specifications for the Edifier R1700BT speakers:
| Feature | Specification |
|---|---|
| Model Name | R1700BT |
| Speaker Type | Bookshelf, Tweeter |
| Material | Wood (MDF with walnut wood effect vinyl) |
| Output Power | 66W RMS (15W x 2 + 18W x 2) |
| Frequency Response | 60Hz - 20KHz |
| Signal-to-Noise Ratio | ≥85dBA |
| Input Sensitivity | PC: 700±50mV; AUX: 550±50mV |
| Input Type | PC, AUX, Bluetooth |
| Bluetooth Version | 4.0 with aptX |
| Bluetooth Range | 10 Meters |
| Woofer Diameter | 4 Inches |
| Tweeter Diameter | 19 Millimeters |
| Product Dimensions | 6.1"D x 8.4"W x 10"H |
| Item Weight | 14.6 Pounds |
| Control Method | Remote, On-speaker knobs |
| UPC | 875674001352 |
10. Warranty and Support
The Edifier R1700BT speakers come with a Limited or Full Warranty. For specific warranty terms, service, and support, please refer to the official Edifier website or contact your local distributor.
You can visit the Edifier Store for more information: Edifier Official Store