Seco-Larm SK-1131-SPQ
Seco-Larm Enforcer Access Control Keypad with Proximity Reader
Model: SK-1131-SPQ
Introduction
The Seco-Larm Enforcer Access Control Keypad with Proximity Reader (SK-1131-SPQ) is a versatile and robust solution for indoor access control. This self-contained unit combines a 12-button illuminated keypad with a built-in 125kHz proximity card reader, offering advanced programming options and multiple outputs for comprehensive security management. It is designed for use in various indoor environments, including offices, homes, and warehouses, providing reliable access control with a sleek, stainless-steel faceplate and soft blue backlighting.
Image: Front view of the Seco-Larm Enforcer Access Control Keypad, showing the backlit numerical buttons and proximity reader icon.
Package Contents
Before beginning installation, please verify that all components are present in the package:
- Keypad
- Back Box
- (2) Installation Screws
- (2) Mounting Screws
- Diode
- Manual (this document)
NOTE: Install indoors only; this product is not rated for outdoor use. Proximity cards/tags are sold separately.
Setup and Installation
The SK-1131-SPQ keypad supports 12-24V AC/DC universal power. It is designed for wall mounting using the included screws and back box. All data is stored in non-volatile EEPROM memory, ensuring retention in case of power outage.
Dimensions
Image: Technical drawing showing the dimensions of the keypad: 4-5/8 inches (117mm) height, 2-7/8 inches (73mm) width, and 1-1/2 inches (38mm) depth including the back box.
Wiring Instructions
Refer to the sample wiring diagram for proper connection to a power supply and electric lock. Ensure all connections are secure and follow local electrical codes.
Image: Sample wiring diagram illustrating connections for Output 1 (N.C., COM, N.O., EG IN), 12-24 AC/DC power input, Door Sense, Electric Lock, Diode 1N4004 Cathode (for DC use only), and Egress buttons.
- Connect the keypad to a 12-24V AC/DC power supply (sold separately).
- Utilize the two 1-Amp relay outputs and one transistor ground output for connecting to access control devices such as electronic door strikes or alarm control panels.
- The included diode should be used for DC applications to protect against back-EMF from inductive loads like electric locks.
- Egress input allows for exit without requiring a code or card entry. Additional egress buttons can be wired in parallel.
Operating Instructions
The SK-1131-SPQ offers extensive programming options for flexible access control.
User Management
- Supports up to 1,200 users total: 1,000 for the primary output and 100 for each of the other two outputs.
- User codes can be 4-8 digits long.
- Users can be easily added or deleted to manage temporary access.
- A "super user code" provides administrative access to the keypad programming.
Access Modes
The keypad features four programmable access modes for all three outputs:
- Card only: Access granted solely by presenting a valid 125kHz proximity card or tag.
- Code only: Access granted by entering a valid user code on the keypad.
- Card and common user code: Requires both a valid card and a shared user code.
- Card and unique user code: Requires a valid card and a unique user code assigned to that card.
Advanced Features
- Built-in Clock: Allows for auto-disable access at specific times.
- Optional Door Open Alarm: Triggers if a door is propped open.
- Auto-Lockout/Duress Output: Can be triggered after 5-10 unsuccessful access attempts.
- Duress Output: Signals a silent alarm if an authorized user is forced to open the door under duress.
- Alarm Output: Triggers an optional alarm control panel if a protected door is forced open.
- Keypad Active Output: Activates for 10 seconds when any key is pressed, useful for triggering video recorders or lights.
- Mantrap Function: For areas with two doors, this feature ensures only one door can be open at a time, enhancing security.
- Independent LEDs: Three independently wired LEDs can be used as custom status indicators.
Maintenance
The Seco-Larm Enforcer Keypad is designed for low maintenance. Regular cleaning and inspection are recommended to ensure optimal performance.
- Cleaning: Wipe the stainless-steel faceplate and keypad buttons with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronics.
- Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion. Verify that the keypad buttons respond correctly and the backlighting functions as expected.
- Software/Firmware: This device does not typically require user-updatable software or firmware. All programming is done directly via the keypad.
- Environmental Conditions: Ensure the keypad remains in an indoor environment within the specified operating temperature and humidity ranges to prevent damage.
Troubleshooting
If you encounter issues with your Seco-Larm Enforcer Keypad, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad is unresponsive or unlit. | No power, incorrect wiring, or power supply issue. | Check power connections and ensure the power supply is providing 12-24V AC/DC. Verify wiring according to the installation diagram. |
| Access denied with correct code/card. | Incorrect access mode, user not programmed, or card not recognized. | Verify the programmed access mode (e.g., Card only, Code only). Ensure the user code/card is correctly programmed into the keypad. Check if the proximity card is 125kHz compatible. |
| Door does not unlock/lock. | Issue with electric lock, relay output wiring, or lock settings. | Check the wiring to the electric lock and the keypad's relay outputs. Ensure the lock itself is functioning correctly. Verify the output settings in the keypad's programming. |
| Tamper alarm triggers unexpectedly. | Keypad not securely mounted or tamper switch issue. | Ensure the keypad is securely mounted to the back box and wall. Inspect the tamper switch for any obstructions or damage. |
If the problem persists after attempting these solutions, please contact Seco-Larm technical support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | SK-1131-SPQ |
| Operating Voltage | 12~24 VDC/VAC |
| Current Draw (at 12VDC) | Standby: 66mA, Total Max. Current Draw: 160mA |
| Outputs | #1 – Form C: 1A at 30VDC; #2 – Form C: 1A at 30VDC; #3 – Transistor Ground: 100mA at 24VDC; K or A: 100mA at 24VDC; Duress: 100mA at 24VDC; Interlock: 100mA at 24VDC; Tamper: 50mA at 24VDC |
| Inputs | Egress: N.O. Ground; Door Sense: N.C. Ground; Door Inhibit: N.O. Ground |
| Proximity Reader Frequency | 125kHz (EM125) |
| Proximity Reader Sensing Distance | 1-1/2 inches (38mm) |
| Operating Temperature | -4° to 158°F (-20° to 70°C) |
| Operating Humidity | 5 to 95 percent non-condensing |
| Dimensions (including back box) | 4-5/8 x 2-7/8 x 1-1/2 inches (117 x 73 x 38 mm) |
| Weight | 6 ounces (170g) |
| Approvals | RoHS, FCC, CE |
| UPC | 676544015727 |
Warranty Information
The Seco-Larm Enforcer Access Control Keypad (SK-1131-SPQ) comes with a Limited Lifetime Warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Seco-Larm website.
Support
For technical assistance, product inquiries, or further support, please contact Seco-Larm customer service. You can find contact information on the official Seco-Larm website or through the retailer where you purchased the product.
It is recommended to have your product model number (SK-1131-SPQ) and purchase date available when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.