Important Safety Information
WARNING: Failure to follow these instructions could result in serious injury or death.
- Use only for a child who is able to hold their head upright unassisted and who weighs less than 26 lbs (12 kg).
- Discontinue use when the child begins to walk or reaches 26 lbs (12 kg), whichever comes first.
- Only use on interior door frames with a wall thickness between 4 – 5 inches (10.2 – 12.7 cm) and a trim thickness of at least 0.5 inches (13 mm).
- Ensure the product is properly secured in the center of the door frame before each use.
- Never leave child unattended. Always keep child in view while in the jumper.
- Do not use near stairs, heat sources, or objects that could be pulled down by the child.
Product Overview
The Bright Starts Bounce 'n Spring Deluxe Door Jumper is designed to provide engaging activity for your baby. It features a secure, adjustable design that attaches to most standard door frames, offering a compact and portable solution for playtime. The jumper includes four repositionable toys to keep your baby entertained.
Figure 1: The Bright Starts Bounce 'n Spring Deluxe Door Jumper, featuring a blue and green seat with attached toys, securely fastened to a white door frame. A happy baby is seated inside, ready to bounce.
Package Contents
Ensure all components are present before assembly:
- Door Jumper Frame with Spring Mechanism
- Fabric Seat Pad
- Soft Prop Pillow (for smaller babies)
- 4 Repositionable Toys (plush zebra, plush giraffe, teether, mirror)
Setup Instructions
Follow these steps for safe and secure installation:
- Inspect Door Frame: Verify your interior door frame meets the safety requirements: wall thickness between 4 – 5 inches (10.2 – 12.7 cm) and trim thickness of at least 0.5 inches (13 mm). The frame must be sturdy and securely installed.
- Attach Clamp: Open the clamp mechanism at the top of the jumper. Place it over the top of the door frame, ensuring the hooks firmly grip both sides of the trim.
- Secure Clamp: Close the clamp securely. Tug gently on the main strap to confirm it is firmly attached and does not slip.
- Adjust Height: Use the adjustable strap and buckle system to set the appropriate height for your baby. The baby's feet should be able to touch the floor with their toes, allowing for bouncing motion.
- Attach Toys: The four included toys can be repositioned on the loops around the seat for your baby's engagement.
Figure 2: A visual guide indicating the necessary wall thickness (4-5 inches) and trim thickness (at least 0.5 inches) for proper and secure installation of the door jumper.
Figure 3: An image highlighting the adjustable strap and buckle system of the jumper, allowing users to customize the height for the baby's comfort and reach.
Operating Instructions
To ensure your baby's enjoyment and safety:
- Place Baby in Jumper: Gently place your baby into the fabric seat, ensuring their legs are through the leg openings and they are comfortably supported. For smaller babies, use the soft prop pillow for additional support.
- Supervise Play: Always supervise your baby while they are in the door jumper. Encourage them to bounce and interact with the attached toys.
- Remove Baby: When playtime is over, carefully remove your baby from the jumper.
Figure 4: A close-up view of a baby happily seated in the jumper, with various attached toys like a plush zebra, giraffe, and teethers visible around the seat.
Figure 5: A detailed shot of the jumper's attached toys, featuring a small mirror for self-discovery, a leaf-shaped teether, and two plush animal toys (zebra and giraffe) designed for engagement.
Maintenance
Proper care ensures the longevity and hygiene of your door jumper:
- Cleaning the Seat Pad: The fabric seat pad is machine-washable. Refer to the care label for specific washing instructions.
- Cleaning the Frame: Wipe down the plastic and metal components of the frame with a damp cloth and mild soap. Rinse thoroughly and air dry.
- Storage: The lightweight design allows for easy storage. When not in use, detach from the door frame and store in a clean, dry place.
Figure 6: A parent is shown easily carrying the folded door jumper in a bag, emphasizing its lightweight and portable design for travel or storage.
Troubleshooting
If you encounter any issues, refer to the following:
- Jumper feels unstable: Ensure the clamp is fully engaged and the door frame meets the specified dimensions. Re-check all connections.
- Baby's feet not touching the floor: Adjust the strap to lower the seat. The baby's toes should lightly touch the floor.
- Baby not engaging with toys: Try repositioning the toys or attaching different toys to the loops to maintain interest.
Product Specifications
| Feature | Specification |
|---|---|
| Model Number | 10410 |
| Product Dimensions | 13.8 x 16.9 x 76 inches (assembled) |
| Item Weight | 4.42 pounds |
| Maximum Weight Recommendation | 26 lbs (12 kg) |
| Target Gender | Unisex |
| Material Type | Metal, Plastic, Fabric (40% metal, 50% fabric, 10% plastic) |
| Care Instructions | Machine-washable seat pad |
| Age Range (Description) | 6 Months and Up (when baby can sit up unassisted) |
Warranty and Support
Bright Starts products are manufactured to high-quality standards. For specific warranty details, please refer to the product packaging or contact Bright Starts customer service.
For further assistance, product support, or to inquire about replacement parts, please visit the official Bright Starts website or contact their customer service department directly.
