DEWALT 20V MAX Blower DCE100B - Instruction Manual

Important Safety Information

Always read and understand all instructions before operating this tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.

• Always wear eye protection that complies with ANSI Z87.1.
• Wear hearing protection during extended periods of use.
• Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Use only with specified battery packs and chargers.
• Do not allow children to operate the blower.

Product Overview

The DEWALT 20V MAX Blower DCE100B is a compact, cordless tool designed for clearing debris from various surfaces. Its lightweight design and variable speed control make it suitable for jobsite cleanup and light outdoor tasks.

Figure 1: DEWALT 20V MAX Blower DCE100B

Figure 2: Key components including Variable Speed Switch, Trigger Lock, and Nozzle.

Components:

• Nozzle Attachments: Three interchangeable nozzles are included for various applications.
• Variable Speed Switch: Allows selection of three different airflow levels.
• Variable Speed Trigger: Provides precise control over blowing power.
• Trigger Lock-on: Reduces user fatigue during extended operation.
• Battery Port: Compatible with DEWALT 20V MAX Lithium Ion batteries (sold separately).

Setup

1. Attaching Nozzle Attachments:

1. Align the desired nozzle attachment with the blower's air outlet.
2. Push the nozzle onto the outlet and twist it clockwise until it locks securely into place.
3. To remove, twist counter-clockwise and pull the nozzle off.

2. Installing/Removing Battery:

1. To install, align the battery with the battery port on the blower and slide it in until it clicks into place.
2. To remove, press the battery release button (if present) and slide the battery out.

Operating Instructions

1. Starting and Stopping the Blower:

• Ensure a charged 20V MAX battery is installed.
• To start, depress the variable speed trigger. The airflow will correspond to the pressure applied to the trigger.
• To stop, release the variable speed trigger.

2. Using the Variable Speed Switch:

The blower features a 3-speed variable speed switch for different applications.

Figure 3: Variable Speed Switch for adjusting airflow levels.

• Slide the switch to select Low, Medium, or High speed settings.
• Low speed is suitable for delicate tasks or confined spaces.
• High speed provides maximum airflow for clearing larger debris.

3. Engaging the Trigger Lock-on:

For continuous operation without holding the trigger, use the trigger lock-on feature.

Figure 4: Trigger Lock-on mechanism.

• Depress the trigger fully, then push the trigger lock-on button to engage.
• To disengage, depress the trigger again.

4. Applications:

• Clearing debris from ground and overhead.
• Tuck pointing and cleaning joints.
• General work area cleanup.

Figure 5: The compact design allows for use in various work environments.

Maintenance

1. Cleaning:

• Keep the air vents clear and free of debris to prevent overheating.
• Use a soft, damp cloth to clean the exterior of the blower. Do not use harsh chemicals.
• Periodically inspect the nozzle attachments for wear or damage.

2. Battery Care and Storage:

• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• Charge batteries fully before storage and periodically during long storage periods to maintain battery health.

Troubleshooting

Specifications

Warranty and Support

This DEWALT product comes with a 3-year limited manufacturer's warranty.

For detailed warranty information, service, or additional support, please refer to the official user manual PDF or visit the DEWALT website.

Official User Manual (PDF): Download Here