Pillowsonic FM15 Under-Pillow Speaker Instruction Manual

Introduction

The Pillowsonic FM15 is a stereo flat speaker system designed for placement under a pillow. It enables private listening to audio content without the need for headphones or earbuds. This system delivers stereo, binaural, and 3D sound directly from within your pillow, providing comfort and a personal surround sound experience at intimate volume levels.

Setup

Follow these steps to set up your Pillowsonic FM15 Under-Pillow Speaker:

1. Placement: Carefully slide the Pillowsonic FM15 speaker unit under your pillow. Position it centrally or to one side, depending on your preferred listening position. Ensure the speaker lies flat for optimal comfort and sound distribution.
2. Connect Audio Source: Locate the 3.5mm audio jack on the speaker's cable. Plug this jack into the headphone output of your audio device (e.g., smartphone, MP3 player, tablet, radio).
3. Adjust Volume: The speaker features an in-line volume control. Set this control to a moderate level. You will fine-tune the volume during operation.

Image: Pillowsonic FM15 speaker with an audio player connected, showing the speaker unit open to reveal the internal components.

Image: Pillowsonic FM15 speaker with an audio player connected, showing the speaker unit closed and ready for placement.

Operating Instructions

Once the speaker is set up, follow these guidelines for operation:

1. Power On Audio Device: Turn on your audio source and begin playing your desired content.
2. Adjust Device Volume: Initially, set the volume on your audio device to a comfortable listening level.
3. Fine-tune Speaker Volume: Use the in-line volume control on the Pillowsonic FM15 cable to make precise adjustments to the sound level. This allows you to achieve a personal listening experience without disturbing others.
4. Optimal Listening: The sound quality is best experienced when your head is resting on the pillow directly above the speaker. Experiment with speaker placement under the pillow to find your ideal listening spot.

Image: The Pillowsonic FM15 Under-Pillow Speaker, illustrating its compact design and integrated volume control.

Maintenance

To ensure the longevity and performance of your Pillowsonic FM15 speaker, observe the following maintenance tips:

• Cleaning: The speaker's enclosure is made of fabric-laminated foam. To clean, gently wipe the surface with a slightly damp cloth. Avoid using harsh chemicals or excessive moisture. Ensure the speaker is completely dry before placing it back under your pillow.
• Cable Care: Handle the audio cable and 3.5mm jack with care. Avoid sharp bends, twists, or pulling on the cable, as this can damage internal wiring and connections.
• Storage: When not in use for extended periods, store the speaker in a clean, dry place away from direct sunlight and extreme temperatures.
• Durability: The Pillowsonic FM15 is designed for durability under normal use. Avoid placing heavy objects directly on the speaker or subjecting it to undue pressure.

Troubleshooting

If you encounter issues with your Pillowsonic FM15 speaker, refer to the following troubleshooting guide:

• No Sound:
  • Ensure the 3.5mm audio jack is fully inserted into your audio device's headphone port.
  • Check that your audio device is powered on and playing content.
  • Verify that the volume on both your audio device and the in-line volume control on the speaker cable is turned up.
  • Test with a different audio device or cable if available, to rule out issues with the source or cable.
• Distorted or Poor Sound Quality:
  • Reduce the volume on both your audio device and the in-line control. High volume levels can cause distortion.
  • Ensure the audio source is playing high-quality audio files.
  • Check the speaker's placement under the pillow; uneven surfaces or excessive pressure can affect sound.
• Sound from Only One Speaker:
  • Confirm the 3.5mm audio jack is fully inserted into the audio device. A partial connection can result in mono sound.
  • Inspect the audio cable for any visible damage or kinks.
  • Test with another audio source to determine if the issue lies with the speaker or the source device.

Specifications

Warranty Information

The Pillowsonic FM15 Under-Pillow Speaker comes with a 1-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use.

The warranty does not cover damage caused by misuse, accident, unauthorized modification, or external causes such as power surges. Please retain your proof of purchase for any warranty claims.

For detailed warranty terms and conditions, or to initiate a warranty claim, please contact Pillowsonic customer support.

Customer Support

If you require further assistance, have questions not covered in this manual, or need to report an issue with your Pillowsonic FM15 speaker, please contact the manufacturer's customer support.

Please refer to the product packaging or the official Pillowsonic website for the most current contact information, including phone numbers, email addresses, or support portals.