Elinchrom Skyport Transmitter Pro (EL19366) for Canon - Instruction Manual

Introduction

The Elinchrom Skyport Transmitter Pro (EL19366) for Canon is an advanced wireless flash trigger system designed to provide photographers with precise control over their Elinchrom lighting units. This transmitter offers two-way communication, allowing users to control and visualize power settings directly from the camera, and supports Hi-Sync mode for shutter speeds up to 1/8000s. It is compatible with various Elinchrom flash units, including previous generations with EL-Skyport capability.

Product Overview

The Skyport Transmitter Pro features a large LCD display for clear visual feedback, easy-access buttons, and a digital dial for quick adjustments. It is designed for seamless integration with Canon cameras and Elinchrom lighting systems.

Figure 1: Front view of the Elinchrom Skyport Transmitter Pro.

Figure 2: Side view of the Elinchrom Skyport Transmitter Pro, showing the USB port.

Figure 3: Another side view of the Elinchrom Skyport Transmitter Pro, highlighting the secure mounting foot.

Setup

1. Battery Installation

• The Skyport Transmitter Pro requires 2 AA batteries for operation.
• Open the battery compartment located on the transmitter.
• Insert the AA batteries, ensuring correct polarity.
• Close the battery compartment securely.

2. Mounting to Camera Hotshoe

• Slide the transmitter onto your Canon camera's hotshoe.
• Secure it in place using the one-touch quick-lock mechanism.

3. Connecting to Elinchrom Flash Units

• Ensure your Elinchrom flash units (e.g., BRX, D-Lite RX, ELC Pro HD, ELB series) have EL-Skyport capability.
• For older units without integrated EL-Skyport, an EL-Skyport Transceiver RX module may be required.
• Set the flash units to the desired channel and group, matching the transmitter settings.

4. Firmware Updates

• The transmitter features a mini-USB socket for future firmware updates.
• Regularly check the Elinchrom website for available updates to ensure optimal performance and compatibility.

Operating Instructions

1. Power On/Off

• Press and hold the power button to turn the transmitter on or off.

2. LCD Display and Interface

• The large LCD display provides real-time feedback on remote flash power settings.
• Use the easy-access buttons and digital dial to navigate menus and adjust settings.

3. Channel and Group Selection

• The Skyport Pro has 20 frequency channels and 4 groups.
• Select the desired channel and group to match your Elinchrom flash units.

4. Normal and Speed Sync Modes

• The backlit display glows green for normal sync mode and red for speed sync mode.
• Switch between modes as required for your shooting scenario.

5. Hi-Sync Mode

• Activate Hi-Sync mode to achieve shutter speeds up to 1/8000s with compatible Canon cameras.
• This allows for freezing motion, overpowering ambient light, and using wider apertures.
• The new ODS (Over Drive Sync) feature enables fine-tuning of the trigger signal to optimize exposure at high shutter speeds, potentially gaining up to 2 more f-stops of light.

6. AF Illuminator

• The integrated AF Illuminator assists with faster focusing in low-light conditions.

7. Operating Range

• Enjoy an extended working range of up to 656 feet (200m) outdoors and up to 196 feet (60m) indoors.

8. Two-Way Control

• The Visual Feedback Interface allows you to control each light's power level and modeling lamp setting directly from the transmitter, with instant updates displayed.

Maintenance

1. Battery Life

• The transmitter has an approximate battery life of 3 months under normal usage.
• Replace batteries when the low battery indicator appears on the LCD.

2. Cleaning

• Wipe the exterior of the transmitter with a soft, dry cloth.
• Avoid using harsh chemicals or abrasive materials.
• If used in dusty environments, gently brush off any accumulated dirt from the buttons and crevices.

Troubleshooting

1. Flash Unit Not Recognized

• Ensure the transmitter and flash units are set to the same channel and group.
• Verify that the flash units are powered on and within the operating range.
• Perform a re-scan for flash units if the transmitter repeatedly fails to find them.

2. Banding in Hi-Sync Mode

• Adjust the ODS (Over Drive Sync) setting on the transmitter. Experiment with values to fine-tune the trigger signal for optimal exposure at high shutter speeds and minimize banding.

3. Compatibility with Other Camera Brands

• The EL19366 model is specifically designed for Canon cameras. It may not function with other camera brands, even in manual triggering mode.

4. General Malfunctions

• Ensure the transmitter's firmware is up to date.
• Check battery levels and replace if necessary.

Specifications

• Product Dimensions: 4.6 x 4.5 x 2.9 inches
• Item Weight: 3.52 ounces
• Item Model Number: EL19366
• Batteries: 2 AA batteries required
• Battery Life: 3 months
• Compatible Mountings: Canon
• Camera Flash: Hotshoe
• Flash Sync Speed: Up to 1/8000 sec
• Manufacturer: Elinchrom

What's in the Box

• Elinchrom Flash Trigger, Transmitter Skyport Pro for Canon Camera

Warranty and Support

For warranty information and technical support, please refer to the official Elinchrom website or contact Elinchrom customer service directly. Keep your purchase receipt for any warranty claims.