IKEA BlaviK LED Wall Lamp with Mirror User Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your IKEA BlaviK LED wall lamp with mirror. Please read these instructions carefully before installation and use, and retain them for future reference.

The IKEA BlaviK is a battery-operated LED wall lamp featuring an integrated magnifying mirror, designed for use in humid environments such as bathrooms. It offers adjustable lighting and an automatic shut-off function for energy saving.

2. Safety Information

• Battery Safety: Always use the correct type and size of batteries (3 x HR6/AA). Ensure batteries are inserted with correct polarity (+ and -). Do not mix old and new batteries, or different types of batteries. Remove exhausted batteries promptly. Dispose of batteries according to local regulations.
• Environment: This product is tested and approved for use in humid environments (IP44 rated), such as bathrooms. However, avoid direct water spray onto the lamp.
• LED Light Source: The LED light sources in this product are non-replaceable. Do not attempt to open or modify the lamp.
• Mounting: Ensure the wall surface is suitable for mounting and can support the weight of the lamp. Use appropriate screws and wall plugs for your wall type (screws are not included).

3. Package Contents

Verify that all components are present before proceeding with installation:

• IKEA BlaviK LED Wall Lamp unit with integrated mirror
• Instruction Manual (this document)

Note: Wall mounting screws and batteries (3 x HR6/AA) are not included and must be purchased separately. IKEA recommends LADDA rechargeable batteries.

4. Setup and Installation

4.1. Battery Insertion

1. Locate the battery compartment on the lamp unit.
2. Open the battery compartment cover.
3. Insert 3 x HR6/AA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery compartment cover securely.

4.2. Wall Mounting

1. Choose a suitable location on the wall, ensuring it is clean and dry.
2. Mark the desired mounting points on the wall.
3. Drill holes if necessary and insert appropriate wall plugs (not included).
4. Secure the lamp to the wall using suitable screws (not included). Ensure the lamp is firmly attached and stable.

This image displays the IKEA BlaviK LED wall lamp, highlighting its compact design, white casing, and the flexible arm that allows for light direction adjustment. The integrated mirror is visible on the lamp's face.

5. Operating Instructions

• Power On/Off: The lamp can be switched on and off manually using the integrated switch.
• Automatic Shut-off: For energy saving, the lamp features a 15-minute automatic shut-off function.
• Light Adjustment: The flexible arm allows you to adjust the direction of the light as needed, providing targeted illumination.
• Magnifying Mirror: Utilize the integrated magnifying mirror for tasks such as shaving or applying makeup.

6. Maintenance

To ensure the longevity and optimal performance of your IKEA BlaviK lamp, follow these cleaning instructions:

• Wipe the lamp surface with a damp cloth.
• For more thorough cleaning, use a mild detergent on the damp cloth.
• After cleaning, dry the lamp thoroughly with a clean, dry cloth.
• Do not use abrasive cleaners or solvents, as these can damage the product's finish.

7. Troubleshooting

• Lamp does not light up:
  • Check if the batteries are inserted correctly with the right polarity.
  • Ensure the batteries are not exhausted; replace or recharge them if necessary.
  • Verify the manual switch is in the 'ON' position.
• Light is dim:
  • The batteries may be low. Replace or recharge them.
• Automatic shut-off not working:
  • Ensure the lamp is not being manually overridden.
  • Check battery levels, as low batteries might affect timer functions.

8. Specifications

9. Warranty and Support

For information regarding warranty, returns, or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.