Introduction
This manual provides essential information for the proper setup, operation, maintenance, and care of your Barrington Billiards 7 Ft. Camden Pool Table. Please read all instructions carefully before assembly and use to ensure safe and enjoyable play. Retain this manual for future reference.
Setup Instructions
The Barrington Billiards 7 Ft. Camden Pool Table requires assembly. It is recommended that two adults perform the assembly. Ensure you have adequate space for both the table and comfortable play with 57-inch cues. A room size of 13' x 16' is recommended.
Unpacking and Inspection
- Carefully unpack all components and compare them with the parts list (not included in this document, refer to packaging).
- Inspect all parts for any damage. Do not proceed with assembly if any parts are damaged. Contact customer support immediately.
- Place all components on a soft, clean surface to prevent scratches during assembly.
Assembly Overview
While specific step-by-step assembly instructions are provided with the product packaging, the general process involves attaching the legs to the table frame and ensuring the playfield is level.
- Attach the white steel legs to the main table frame using the provided hardware.
- Ensure all connections are secure.
- Adjust the leg levelers to achieve a perfectly flat playing surface.
Image: Barrington Billiards 7 Ft. Camden Pool Table with overall dimensions (84"L x 47"W x 31"H).
Image: Close-up of the modern white metal legs design, providing sturdy support.
Operating Instructions
Your Barrington Billiards 7 Ft. Camden Pool Table is designed for consistent and responsive play. Familiarize yourself with its key features for optimal performance.
Playfield and Ball Roll
The table features an 18mm thick playfield covered in a high-quality gray velvet cloth. This surface, measuring 74" L x 37" W, ensures a smooth and consistent ball roll. Always ensure the playfield is clean and free of debris before playing.
Image: View of the playfield, highlighting its dimensions and velvet cloth for smooth ball rolling.
Rebound Performance
K-818 rubber bumpers are integrated to provide accurate ball bounce and responsive play. Avoid leaning on the rails or striking them with excessive force to maintain their integrity.
Image: Detail of the premium rubber bumper and the fine-designed top rail, ensuring superb ball bounce.
Pockets and Construction
The table includes custom ABS corner caps and molded drop pockets. These are designed for durability and to securely collect pocketed balls.
Image: Close-up of a molded corner cap and a built-in molded drop-style pocket.
Product Videos
Video: POOL TABLE CLOSE UP LOOK! key features everyone should know
Description: This video provides a detailed close-up look at the key features of the pool table, offering insights into its design and functionality.
Video: Barrington Billiards Multiple Styles Pool Table, Preassemble
Description: An overview video showcasing the Barrington Billiards pool table, potentially including aspects of its pre-assembly or general features.
Maintenance
Proper maintenance will extend the life and performance of your pool table.
- Cleaning the Playfield: Use the included table brush to gently remove dust and debris from the velvet cloth. Brush in one direction to avoid damaging the fibers. Do not use harsh chemicals or abrasive cleaners.
- Cleaning the Frame and Legs: Wipe down the MDF top rails, wood-grain apron, and white steel legs with a soft, damp cloth. Avoid excessive moisture.
- Cue Sticks: Keep cue sticks clean and straight. Store them properly to prevent warping.
- Balls: Clean billiard balls regularly with a mild soap and water solution, then dry thoroughly.
- Environment: Store the table in a climate-controlled room to prevent warping of wood components due to humidity or extreme temperature changes.
Troubleshooting
Here are solutions to common issues you might encounter:
| Problem | Solution |
|---|---|
| Uneven Playing Surface | Adjust the leg levelers located at the bottom of each leg until the table is perfectly level. Use a spirit level for accuracy. |
| Slow Ball Roll / Excessive Friction | Clean the playfield thoroughly with the provided brush. Ensure no chalk residue or debris is present. Avoid using household cleaners on the felt. |
| Loose Components | Periodically check and tighten all screws and bolts, especially those connecting the legs to the frame. Do not overtighten. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | BL084Y25006 |
| UPC | 821735047852 |
| Product Dimensions (L x W x H) | 84" x 47" x 31" (7 ft) |
| Playfield Dimensions (L x W) | 74" x 37" |
| Playfield Thickness | 18mm |
| Material | Metal, Plastic, Wood (Engineered Wood top, Wood frame) |
| Color | Wood Grain/White |
| Item Weight | 187.22 Pounds |
| Assembly Required | Yes |
| Recommended Room Size | 13' x 16' (with 57" cues) |
Included Accessories
Your Barrington Billiards 7 Ft. Camden Pool Table comes with a complete accessory set to get you started:
- 2 x 57" Cue Sticks
- 1 x Full Set of 2.25" Billiard Balls
- 1 x Triangle Rack
- 2 x Chalks
- 1 x Table Brush
Image: A visual representation of the included accessories: two cue sticks, billiard balls, triangle rack, chalks, and a table brush.
Warranty Information
This product is covered by a 90-day Limited Manufacturer Warranty. For specific details regarding coverage, terms, and conditions, please refer to the warranty documentation included with your product packaging or contact Barrington Billiards customer support.
Support
For assistance with assembly, missing parts, or any other inquiries, please contact Barrington Billiards customer support. Contact information can typically be found on the product packaging or the manufacturer's official website.
When contacting support, please have your model number (BL084Y25006) and UPC (821735047852) readily available.