KERBL 2754
KERBL Roslam Closed Bottle Instruction Manual
Model: 2754
1. Product Overview
The KERBL Roslam Closed Bottle, Model 2754, is specifically designed for feeding liquid food to lambs. Its closed design ensures hygienic and controlled feeding, making it an easy-to-use tool for animal care.
Figure 1: The KERBL Roslam Closed Bottle, designed for hygienic lamb feeding.
2. Components
The KERBL Roslam Closed Bottle consists of the following main components:
- Bottle Body: The main container for liquid feed.
- Closed Teat/Nipple: Designed for controlled liquid delivery to lambs.
3. Setup
Before first use and after each cleaning, ensure the bottle and teat are properly assembled and clean.
- Clean the Bottle: Thoroughly wash the bottle and teat with warm, soapy water. Rinse completely to remove all soap residue.
- Prepare Feed: Fill the bottle with the appropriate liquid feed for lambs, ensuring it is at the correct temperature.
- Secure Teat: Attach the closed teat securely to the bottle opening, ensuring a tight seal to prevent leaks.
4. Operating Instructions
Follow these steps for effective and safe feeding of lambs:
- Position the Lamb: Ensure the lamb is in a comfortable and stable position for feeding.
- Introduce Teat: Gently introduce the teat into the lamb's mouth. The lamb should naturally begin to suckle.
- Monitor Feeding: Observe the lamb during feeding to ensure it is consuming the liquid feed properly and not aspirating.
- Control Flow: The closed design helps control the flow, but always monitor the lamb's intake.
- Finish Feeding: Once the lamb has consumed the desired amount, gently remove the bottle.
5. Maintenance and Cleaning
Proper cleaning and maintenance are crucial for hygiene and the longevity of the Roslam Closed Bottle.
- After Each Use: Disassemble the bottle and teat immediately after each feeding.
- Washing: Wash all components thoroughly with warm water and a mild, animal-safe detergent. Use a bottle brush to reach all internal surfaces.
- Rinsing: Rinse all parts meticulously under running water to remove all detergent residue.
- Drying: Allow all components to air dry completely before reassembling or storing. Store in a clean, dry place.
- Inspection: Regularly inspect the teat for any signs of wear, cracks, or damage. Replace damaged teats immediately to ensure proper feeding and hygiene.
6. Troubleshooting
Refer to the table below for common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Liquid not flowing or flowing too slowly. | Teat blocked or air vent obstructed. | Check the teat for blockages. Ensure the air vent (if present) is clear. |
| Liquid leaking from the bottle. | Teat not securely attached or damaged. | Ensure the teat is tightly screwed onto the bottle. Inspect the teat for cracks and replace if damaged. |
| Lamb refuses to feed. | Feed temperature incorrect, or lamb is unwell. | Verify feed temperature. Consult a veterinarian if the lamb shows signs of illness. |
7. Specifications
| Model Number | 2754 |
| Brand | KERBL |
| Product Dimensions | 20 x 20 x 20 cm |
| Item Weight | 0.05 Kilograms (46 g) |
| Included Components | Kerbl Roslam - Closed Bottle |
| ASIN | B016C4875M |
| GTIN | 04018653270547 |
8. Warranty and Support
Specific warranty information for the KERBL Roslam Closed Bottle, Model 2754, is not provided in this manual. For details regarding warranty coverage, product support, or to inquire about replacement parts, please contact KERBL customer service directly or refer to the official KERBL website.
Manufacturer: Kerbl
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.