1. Product Overview
This manual provides essential information for the safe and efficient operation of your Bosch PXE675DC1E Built-In Induction Ceramic Hob. This appliance features four induction cooking zones, advanced control options, and integrated safety functions.
Figure 1: Top view of the Bosch PXE675DC1E Induction Ceramic Hob, showing the four cooking zones and the integrated control panel.
2. Setup and Installation
Proper installation is crucial for the safe and optimal performance of your induction hob. It is recommended that installation be performed by a qualified professional.
2.1 Unpacking
Carefully remove the hob from its packaging. Inspect the appliance for any signs of damage. Do not install a damaged appliance.
2.2 Installation Dimensions
- Appliance Dimensions (H x W x D): 51 x 606 x 527 mm
- Installation Cut-out Dimensions (W x D): 560 x 500 mm
- Minimum Worktop Thickness: 30 mm
2.3 Electrical Connection
The appliance requires an electrical connection with a value of 7.4 kW. A 1.1 m connection cable is included in the packaging. Ensure the electrical supply meets the requirements and that the connection is made according to local regulations.
Figure 2: Side profile of the hob, illustrating the slim design suitable for built-in installation. This view is important for understanding the required worktop thickness and clearance.
3. Operating Instructions
The Bosch PXE675DC1E features intuitive touch controls for precise cooking.
3.1 Control Panel
The hob is equipped with a Direct Select Premium control panel and a TopControl digital display, allowing for direct selection of cooking zones and power levels. The human interface input is touchscreen-based.
Figure 3: Close-up view of the Direct Select Premium control panel, showing the touch-sensitive buttons for power levels, timers, and special functions.
3.2 Cooking Zones and Power Levels
The hob has 4 induction cooking zones with pot detection, including 1 flexible induction zone. There are 17 power levels available for precise heat control.
3.3 Special Functions
- PerfectFry Frying Sensor: Features 5 temperature levels for optimal frying results.
- PowerBoost Function: Provides extra power for all cooking zones for rapid heating.
- ReStart: Recalls previous settings if the hob is accidentally switched off.
- QuickStart: Automatically detects the pan and displays the corresponding cooking zone.
- Stopwatch for Hob: A convenient timer function.
- MoveMode: Allows for easy shifting of cookware between different power zones.
- Timer with Switch-Off Function: Set a timer for each cooking zone, which automatically switches off the zone when the time expires.
3.4 Safety Features
- Safety Switch-Off: Automatically turns off the hob after a certain period of inactivity.
- Child Lock: Prevents accidental operation of the hob.
- 2-Stage Residual Heat Display: Indicates if a cooking zone is still hot after use.
- PowerManagement Function: Limits the total power consumption of the hob.
- Wipe Protection Function: Temporarily locks the control panel for easy cleaning during cooking.
- Main Switch: For quick and complete power disconnection.
4. Maintenance and Cleaning
To ensure the longevity and performance of your induction hob, regular cleaning and maintenance are recommended.
- Daily Cleaning: Wipe the glass ceramic surface with a soft cloth and mild detergent after each use, once the hob has cooled down.
- Stubborn Stains: For burnt-on food or stubborn stains, use a specialized ceramic hob cleaner. Follow the product instructions carefully.
- Avoid Abrasives: Do not use abrasive sponges, scouring pads, or harsh chemical cleaners, as these can scratch or damage the glass ceramic surface.
- Control Panel: Use the wipe protection function to temporarily lock the controls when cleaning the surface during cooking to prevent accidental changes to settings.
5. Troubleshooting
This section addresses common issues you might encounter with your induction hob. For more complex problems, contact a qualified service technician.
5.1 Hob Not Turning On
- Check if the main switch is activated.
- Ensure the appliance is properly connected to the power supply.
- Verify that the child lock is not activated.
5.2 Cooking Zone Not Heating
- Ensure the cookware is suitable for induction hobs and is correctly placed on the cooking zone.
- Check if the power level is set appropriately.
- Verify that no error codes are displayed.
5.3 Displaying Error Codes
If an error code appears on the digital display, consult the full product manual for specific interpretations and recommended actions. Often, turning the hob off and on again (main switch) can resolve temporary issues.
6. Technical Specifications
| Feature | Specification |
|---|---|
| Model | PXE675DC1E |
| Appliance Dimensions (H x W x D) | 51 x 606 x 527 mm |
| Installation Cut-out Dimensions (W x D) | 560 x 500 mm |
| Minimum Worktop Thickness | 30 mm |
| Electrical Connection Value | 7400 W (7.4 kW) |
| Voltage | 230 Volts |
| Number of Heating Elements | 4 (Induction cooking zones) |
| Power Levels | 17 |
| Control Type | Digital Touch (Direct Select Premium) |
| Heater Surface Material | Glass Ceramic |
| Material | Stainless Steel (frame/trim) |
| Special Features | Power-On Indicator, Double Induction, Automatic Shut-Off, PerfectFry Sensor, PowerBoost, Child Lock |
| Product Dimensions (L x W x H) | 56 x 49 x 5.5 cm |
| Item Weight | 1 g (Note: This weight seems incorrect and likely refers to packaging or a component. Actual appliance weight will be significantly higher.) |
7. Warranty and Support
For detailed information regarding the product warranty, please refer to the warranty card included with your appliance or contact your authorized Bosch dealer or service center. Specific warranty terms and conditions may vary by region.
For technical support, service requests, or to order spare parts, please contact Bosch customer service. Contact details can typically be found on the Bosch official website for your country or in the documentation provided with the appliance.
