TOMY Hot Rodimus MP-28 Transformers Masterpiece Action Figure Instruction Manual

1. Product Overview

The TOMY Hot Rodimus MP-28 is a highly detailed action figure from the Transformers Masterpiece Series. This collectible figure is designed to accurately represent Hot Rodimus from the Transformers universe, offering both robot and vehicle modes. It is part of the Takara Masterpiece line, known for its intricate design and articulation.

• Brand: TOMY
• Model: MP-28
• Type: Action Figure
• Series: Transformers Masterpiece Series
• Size: Approximately 6 inches

What's in the Box

• Hot Rodimus MP-28 Figure
• Related Components (Accessories)

2. Safety Information

Safety Warning: This product may contain sharp points, small parts that are choking hazards, and other elements that are not suitable for children under 3 years of age.

3. Setup and Assembly

Your Hot Rodimus figure comes pre-assembled in robot mode. Minor assembly may be required for accessories. Please refer to the included directions for detailed instructions on attaching accessories.

Attaching Accessories

1. Carefully unpackage all accessories from the tray.
2. Identify the various weapons and tools, such as the blaster, photon eliminator, buzzsaw, and fishing rod.
3. Locate the designated ports on the figure's hands or other attachment points.
4. Gently insert the pegs of the accessories into the corresponding ports until they are securely fastened. Do not force any parts.

4. Operating and Transformation

The Hot Rodimus MP-28 figure features multiple points of articulation for dynamic posing and a complex transformation sequence between robot and futuristic sports car modes.

Robot Mode Posing

• The figure has articulated joints in the head, shoulders, elbows, wrists, waist, hips, knees, and ankles.
• Carefully manipulate each joint to achieve desired poses. Avoid excessive force to prevent damage.
• Accessories can be attached to the figure's hands or other designated ports to enhance display options.

Transformation to Vehicle Mode

The transformation process is intricate and requires careful attention to detail. Refer to the included printed instructions for a step-by-step guide. Key steps generally involve:

1. Folding the head and torso components.
2. Collapsing the arms and legs into the vehicle's chassis.
3. Aligning panels and tabs to form the sleek futuristic sports car.
4. Ensuring all parts are securely tabbed in place for a solid vehicle mode.

Official Product Video: Product Overview

5. Maintenance

To ensure the longevity and pristine condition of your Hot Rodimus MP-28 figure, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by immediate drying. Avoid harsh chemicals or abrasive materials.
• Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation. Keep it in its original packaging or a display case to protect it from dust and accidental falls.
• Joint Care: If joints become stiff, apply a small amount of silicone shock oil (specifically designed for plastic models) to the joint. If joints become loose, clear nail polish or a thin layer of super glue can be applied to the peg and allowed to dry completely before reassembling, to add friction.

6. Troubleshooting

Should you encounter any issues with your Hot Rodimus MP-28 figure, consider the following common solutions:

• Difficulty Transforming: Refer to the detailed transformation steps in the included manual. Ensure all tabs are aligned and joints are moved in the correct sequence. Do not force parts, as this can cause breakage.
• Loose Joints: As mentioned in maintenance, a thin layer of clear nail polish or super glue on the joint's peg, allowed to dry, can increase friction.
• Stuck Joints: Gently warm the joint with a hairdryer on a low setting for a few seconds to make the plastic more pliable, then attempt to move the joint.
• Missing or Broken Parts: Contact TOMY customer support or the retailer where the figure was purchased for assistance.

7. Specifications

8. Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please refer to the official TOMY website or contact their customer service directly. Keep your proof of purchase for any warranty claims.