1. Product Overview
The UpBright 6V AC/DC Adapter is designed to provide reliable power to compatible Grundig and Eton digital radio receivers. This adapter converts standard AC wall power to the required 6V DC, allowing for continuous operation without batteries.
What's in the Box
- 1 x UpBright 6V AC/DC Adapter
- Optional: 1 x Suitable Outlet Adapter (for international orders, if applicable)
Image 1.1: The UpBright 6V AC/DC Adapter, showing the main unit and power cord with barrel connector.
2. Setup Instructions
Follow these steps to properly connect your UpBright 6V AC/DC Adapter to your radio receiver.
- Verify Compatibility: Ensure your radio receiver requires a 6V DC input and has a compatible barrel round connector. Refer to your radio's manual for specific power requirements.
- Check Polarity: The adapter features a negative polarity configuration (center negative). Confirm that your radio receiver also requires a center negative power input. Incorrect polarity can damage your device.
- Connect to Radio: Insert the barrel connector of the adapter firmly into the DC input jack on your Grundig or Eton radio receiver.
- Connect to Power Outlet: Plug the AC end of the adapter into a standard 100-240VAC, 50/60Hz wall power outlet.
- International Use (if applicable): If using in a region with different plug types, attach the appropriate outlet adapter (AU, EU, UK) to the AC plug before inserting into the wall outlet.
Image 2.1: Close-up of the barrel connector and its negative polarity diagram. The inner pin is negative, and the outer barrel is positive.
Image 2.2: Examples of international outlet adapters for different regions (Australia, Europe, United Kingdom).
3. Operating Instructions
Once the UpBright 6V AC/DC Adapter is correctly connected to both the radio receiver and a power outlet, your radio should be ready for operation. Power on your radio using its dedicated power button or switch.
The adapter provides a stable 6V DC output, ensuring consistent performance for your compatible device. No further configuration is required for the adapter itself.
4. Maintenance
To ensure the longevity and optimal performance of your UpBright 6V AC/DC Adapter, follow these maintenance guidelines:
- Keep Dry: Avoid exposing the adapter to moisture, water, or high humidity.
- Clean Gently: Use a dry, soft cloth to clean the adapter. Do not use liquid cleaners or solvents.
- Avoid Physical Damage: Do not drop, bend, or apply excessive force to the adapter or its cables. Ensure cables are not kinked or pinched.
- Proper Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures.
- Unplug When Not in Use: For extended periods of non-use, unplug the adapter from both the wall outlet and the radio receiver.
5. Troubleshooting
If you encounter issues with your UpBright 6V AC/DC Adapter, refer to the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on. |
|
|
| Adapter feels hot during use. | Normal operation, or device drawing too much power. | A slight warmth is normal. If it's excessively hot, unplug immediately and verify device compatibility. The adapter has Over Current Protection (OCP) and Short Circuit Protection (SCP). |
| Static or interference on radio stations. | Electrical interference from the adapter or other devices. | Try moving the adapter or radio away from other electronic devices. If the issue persists, consider using batteries for the radio to isolate the problem. |
| Adapter connector does not fit the radio's DC input. | Incompatible connector size. | Verify the exact barrel connector dimensions required by your radio. This adapter uses a standard barrel round connector. |
6. Specifications
| Feature | Detail |
|---|---|
| Input Voltage | 100-240VAC, 50/60Hz (World Wide Input Voltage) |
| Output Voltage | 6V DC |
| Output Current | 0.5A (500mA) |
| Wattage | 3 Watts |
| Connector Type | Barrel Round Connector |
| Polarity | Center Negative |
| Protection Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Product Dimensions | Approximately 3 x 3 x 1 inches |
| Item Weight | Approximately 2.08 ounces |
| Compatible Devices | Grundig S350, S350DL, S350DL-R, S350DLR, S-350, Eton AM FM Shortwave Digital Radio Receiver |
7. Safety Information
Please read and follow these safety precautions to prevent injury or damage to your device:
- Use the adapter only with compatible devices that match the voltage, current, and polarity specifications.
- Do not open or attempt to repair the adapter. Refer all servicing to qualified personnel.
- Keep the adapter away from heat sources, direct sunlight, and flammable materials.
- Do not operate the adapter with a damaged cord or plug.
- Ensure proper ventilation around the adapter during use. Do not cover it.
- Unplug the adapter during lightning storms or when unused for long periods.
- This adapter is equipped with Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard your devices.
8. Warranty and Support
UpBright offers the following warranty and support for this product:
- Refund Policy: 30 Days Refund.
- Exchange Policy: 24 Months Exchange.
For warranty claims or technical support, please contact UpBright customer service through your purchase platform or the official UpBright website.
Image 8.1: The UpBright AC/DC Adapter, often accompanied by a limited warranty certificate.
