Introduction
The NOCO Boost GB40 is a compact, yet powerful, 1000-amp lithium jump starter designed to safely jump start a dead car battery in seconds. This portable device is suitable for a wide range of vehicles, including cars, trucks, motorcycles, ATVs, boats, SUVs, and vans. It incorporates advanced safety features and offers additional functionalities such as a portable power bank and an integrated LED flashlight.
The NOCO Boost GB40 unit with its included heavy-duty clamps.
Safety Information
WARNING: Read and understand all safety information before using this product. Failure to follow these safety instructions may result in electrical shock, explosion, fire, which may result in serious injury, death, or property damage.
- Battery Safety: Do not attempt to jump start a frozen battery. If the battery fluid is frozen, do not use the device.
- Ventilation: Ensure adequate ventilation when operating in an enclosed area.
- Spark-Proof Connections: The GB40 features spark-proof technology and reverse polarity protection. However, always ensure correct connection to battery terminals.
- Children: Keep out of reach of children. This is not a toy.
- Charging: Only charge the device using the provided USB-C cable. Do not use damaged cables or chargers.
The UltraSafe technology ensures spark-proof connections and reverse polarity protection for safe operation.
What's in the Box
Verify that all components are present and in good condition:
- GB40 Portable Car Battery Jump Starter Pack
- Heavy-Duty Booster Clamps
- USB-C Charging Cable
- Microfiber Storage Bag
- User Guide for Jump Starter
- 1-Year Limited Warranty Information
All items included in the NOCO Boost GB40 package.
Setup
Initial Charge
Before first use, fully charge the GB40. The unit comes partially charged from the factory. It is recommended to fully charge the unit before use to ensure optimal performance.
- Connect the included USB-C charging cable to the USB-C IN port on the GB40.
- Connect the other end of the USB-C cable to a USB wall charger (not included) or a powered USB port.
- The Charge LEDs will illuminate, indicating the charging status. All four LEDs will be solid white when fully charged.
- A full charge typically takes approximately 3 hours.
Understanding the LED indicators on the GB40 for charge status and operation.
Operating Instructions
Jump Starting a Vehicle
- Connect Clamps: Attach the heavy-duty booster clamps to the GB40. Ensure a secure connection.
- Connect to Battery: Connect the red (positive) clamp to the positive (+) battery terminal and the black (negative) clamp to the negative (-) battery terminal.
- Power On: Press the Power Button on the GB40. The Power LED will illuminate white. The Charge LEDs will indicate the GB40's battery level.
- Start Vehicle: Attempt to start your vehicle. If the vehicle does not start after 1-3 seconds, wait 15-30 seconds and try again.
- Disconnect: Once the vehicle starts, disconnect the battery clamps from the vehicle battery first, then disconnect the clamps from the GB40.
The GB40 is designed to instantly start dead batteries, providing up to 20 jump starts on a single charge for engines up to 6.0L gas and 3.0L diesel.
Simple four-step process for jump starting your vehicle with the GB40.
Using as a Portable Power Bank
The GB40 can be used to charge USB devices such as smartphones, tablets, and other portable electronics.
- Connect your device's USB charging cable to the USB OUT port on the GB40.
- The GB40 will automatically begin charging your device.
The GB40 functions as a portable power bank with 2.1A USB-A output and 10W USB-C input for recharging.
Using the Integrated LED Flashlight
The GB40 features a powerful 100-lumen LED flashlight with multiple modes for various situations.
- Press the Light Mode Button to cycle through the seven light modes: 100% > 50% > 10% > SOS > Blink > Strobe > Off.
- Hold the Light Mode Button for 3 seconds to activate the SOS or Strobe modes directly.
The integrated 100-lumen LED flashlight offers multiple modes for illumination during repairs, emergencies, or in low-light environments.
Maintenance
- Cleaning: Clean the exterior of the GB40 with a soft, damp cloth. Do not use harsh chemicals or abrasive materials.
- Storage: Store the GB40 in a cool, dry place when not in use. Avoid extreme temperatures.
- Recharging: For optimal battery life, recharge the GB40 every 2-3 months, even if not used.
- Cable Care: Inspect the clamps and cables for any damage before each use. Replace if damaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| GB40 does not turn on. | Battery is completely discharged. | Charge the GB40 using the USB-C cable. |
| Vehicle does not jump start. | Poor connection to battery terminals. | Ensure clamps are securely connected to clean battery terminals. |
| Vehicle does not jump start. | Battery is severely discharged or damaged. | Try using the Manual Override feature (refer to full user guide for details). If still unsuccessful, the battery may need replacement. |
| Error LED is blinking. | Reverse polarity connection. | Disconnect clamps and reconnect correctly (red to positive, black to negative). |
| Error LED is blinking. | Short circuit detected. | Ensure clamps are not touching each other or other metal surfaces. |
Specifications
| Feature | Detail |
|---|---|
| Model | GB40 |
| Peak Amperage | 1000 Amps |
| Battery Type | Lithium-Ion |
| Voltage | 12V |
| Engine Compatibility | Up to 6.0L Gas, 3.0L Diesel |
| USB Output | 2.1A (USB-A) |
| USB Input (Recharge) | 10W (USB-C) |
| LED Flashlight | 100 Lumens, 7 Modes |
| Dimensions (D x W x H) | 4.61" x 8.19" x 4.21" |
| Item Weight | 7.94 Ounces |
| Water Resistance | IP65 (Rugged, water-resistant enclosure) |
| Safety Features | Spark-Proof, Reverse Polarity Protection |
Warranty and Support
Warranty Information
The NOCO Boost GB40 comes with a 1-Year Limited Warranty. This warranty covers defects in material and workmanship under normal use. For specific terms and conditions, please refer to the warranty card included in your product packaging or visit the official NOCO website.
Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact NOCO Customer Support. You can find contact information on the official NOCO website or through the retailer where you purchased the product.
Online Resources:
- Official NOCO Website: no.co
- Product Support Page (if available): Refer to the official website for dedicated product support pages, FAQs, and additional resources.
