Product Overview
The Brita Metro Water Filter Pitcher is designed to provide cleaner, great-tasting water by reducing common contaminants found in tap water. This slim, BPA-free pitcher has a 6-cup capacity, making it suitable for daily use and fitting conveniently on refrigerator shelves.
Image: Brita Metro Water Filter Pitcher with its standard filter, ready for assembly.
Key features include an electronic filter change indicator, an easy-fill locking lid, and compatibility with Brita Standard and Longlast filters. Using this pitcher helps reduce the need for single-use plastic water bottles.
Setup and First Use
- Unpack Components: Carefully remove the pitcher, lid, and filter from the packaging.
- Wash Pitcher: Wash the pitcher and lid by hand with mild detergent and rinse thoroughly. Do not wash the filter in a dishwasher.
- Prepare Filter: Before first use, flush the new Brita Standard filter under cold tap water for 15 seconds. This removes any loose carbon dust.
- Insert Filter: Align the groove on the filter with the ridge in the pitcher's reservoir. Firmly press the filter into the reservoir until it clicks into place.
- Fill Pitcher: Fill the pitcher with cold tap water through the lid opening. The first two pitchers of filtered water may contain carbon dust (black flecks) and should be discarded or used for watering plants.
- Set Filter Indicator: If your pitcher has an electronic filter indicator, press and hold the "STATUS" button for 3 seconds until all four bars appear, indicating the filter life has been reset.
Image: Top view of the Brita pitcher lid, showing the electronic filter indicator for tracking filter life.
Operating Instructions
Using your Brita Metro pitcher is straightforward. Once the filter is installed and primed, simply fill the pitcher with tap water, and the filter will begin purifying the water as it passes through.
- Filling: Lift the easy-fill locking lid and pour cold tap water directly into the reservoir. The water will flow through the filter into the main pitcher body.
- Pouring: Once the water has filtered, you can pour it directly from the pitcher. The lid is designed to stay in place during pouring.
- Storage: Store the pitcher in the refrigerator to keep your filtered water cool and fresh. The slim design allows it to fit easily on most refrigerator shelves.
Image: Diagram illustrating key features of the Brita pitcher, such as its 6-cup capacity, BPA-free material, and ability to fit in a refrigerator.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Brita pitcher and filter.
Filter Replacement
The filter should be replaced regularly to maintain water quality. The electronic indicator on the lid helps track filter life.
- Standard Filter: Replace approximately every 2 months or after 40 gallons (151 liters) of use.
- Longlast Filter (if applicable): Replace approximately every 6 months or after 120 gallons (454 liters) of use.
When the indicator shows one bar or flashes, it's time to replace the filter. Follow the "Setup and First Use" steps for installing a new filter and resetting the indicator.
Image: Diagram explaining the filtration process, showing water passing through patented aeration design, mesh screen, activated carbon, and ion exchange resin.
Cleaning the Pitcher
- Wash the pitcher and lid by hand with mild soap and water.
- Do not use abrasive cleaners or put the pitcher in the dishwasher, as this can damage the plastic or electronic components.
- Rinse all parts thoroughly before reassembling.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Black flecks in water | Loose carbon dust from new filter. | This is normal for new filters. Discard the first two pitchers of filtered water. Ensure the filter was flushed for 15 seconds before installation. |
| Water filters slowly | Filter may be clogged or nearing end of life. | Remove filter and re-insert firmly. If problem persists, replace the filter. |
| Electronic indicator not working | Battery depleted or sensor issue. | Press and hold the "STATUS" button for 3 seconds to reset. If it still doesn't work, the battery may be depleted (some models have non-replaceable batteries). Track filter changes manually. |
| Water tastes or smells unusual | Filter needs replacement or pitcher needs cleaning. | Replace the filter. Clean the pitcher thoroughly. Ensure pitcher is stored in a cool place. |
Specifications
- Brand: Brita
- Model Name: Metro
- Product Dimensions: 9.33"L x 4.29"W x 8.88"H
- Capacity: 6 cups (1.4 liters)
- Filter Type: Compatible with Brita Standard and Longlast filters
- Special Feature: Electronic Filter Change Indicator
- Material: BPA-Free Plastic
- Installation Type: Freestanding
- Power Source (for indicator): Manual Winding
- UPC: 060258360929
Warranty and Support
Brita offers a 30-day money-back guarantee for satisfaction with your purchase, based on recommended usage with tap water.
For further assistance, product registration, or to receive filter reminders, please visit the official Brita website or contact their customer support.
- Official Brita Store: Visit the Brita Store on Amazon
- Customer Service: Refer to the product packaging or the official Brita website for contact information.
