Cuisinart DGB-700FH Replacement Filter Holder Instruction Manual

1. Product Overview

The Cuisinart DGB-700FH is a genuine OEM replacement filter holder designed specifically for Cuisinart Grind and Brew Coffeemaker models DGB-700BC and DGB-900BC. This component is crucial for the proper functioning of your coffeemaker, ensuring optimal brewing and a consistent coffee experience.

Image: Cuisinart DGB-700FH Replacement Filter Holder, a black plastic cone-shaped basket with a central mechanism.

Key Features:

• Perfect Compatibility: Exclusively designed for Cuisinart models DGB-700BC and DGB-900BC. Verify your coffeemaker model to ensure proper fit.
• High-Quality Construction: Manufactured from durable, BPA-free materials for safety and longevity.
• OEM Part: A genuine Original Equipment Manufacturer (OEM) replacement part, guaranteeing quality and performance identical to the original component.
• Easy Installation: Engineered for simple attachment and removal, facilitating hassle-free use and maintenance.
• Enhanced Coffee Experience: Contributes to optimal brewing conditions, ensuring a perfect cup of coffee with every use.

2. Installation and Assembly

This section provides detailed instructions for assembling and installing your new Cuisinart DGB-700FH Replacement Filter Holder. Proper assembly is essential for the correct operation of your coffeemaker.

Component Identification:

The DGB-700FH filter holder consists of three main parts: the main filter basket, a spring, and a stopper valve with a small rubber washer.

Assembly Steps:

1. Prepare Components: Ensure all parts (filter basket, spring, stopper valve, and rubber washer) are clean and dry.
2. Insert Washer: Place the small rubber washer into the central opening at the bottom of the filter basket from the inside. Ensure it sits flush and securely.
3. Attach Spring to Stopper: Place the spring onto the stem of the stopper valve.
4. Insert Stopper Assembly: From the underside of the filter basket, insert the stopper valve (with the spring attached) through the central opening. The stem of the stopper should pass through the rubber washer and the basket's opening.
5. Secure Stopper: Gently push and twist the stopper valve until it clicks into place, securing the spring and washer. The stopper should move freely up and down when pressed, returning to its closed position due to spring tension.

Installation into Coffeemaker:

Once assembled, place the filter holder into the designated brew basket compartment of your Cuisinart DGB-700BC or DGB-900BC coffeemaker. Ensure it sits firmly and correctly aligned.

Visual Guides:

3. Operating Instructions

The DGB-700FH filter holder functions as an integral part of your Cuisinart coffeemaker's brewing system. Once correctly installed, its operation is seamless with the coffeemaker's standard brewing cycle.

1. Place Coffee Filter: Insert a standard paper coffee filter (or a reusable filter, if applicable) into the DGB-700FH filter holder.
2. Add Coffee Grounds: Measure and add your desired amount of coffee grounds into the filter.
3. Position Filter Holder: Place the filled filter holder securely into the brew basket compartment of your coffeemaker. Ensure the stopper valve at the bottom of the filter holder is properly seated.
4. Brew Coffee: Close the coffeemaker lid and initiate the brewing cycle according to your coffeemaker's instructions. The stopper valve will automatically open during brewing to allow coffee to flow into the carafe and close when the carafe is removed, preventing drips.

4. Maintenance and Cleaning

Regular cleaning of your DGB-700FH filter holder is essential to maintain optimal performance and ensure the best coffee flavor. Always unplug the coffeemaker before cleaning.

Daily Cleaning:

• After each use, remove the filter holder from the coffeemaker.
• Discard used coffee grounds and the paper filter.
• Rinse the filter holder thoroughly under warm running water.
• For a more thorough clean, wash with mild soap and water.
• Ensure the stopper valve moves freely and is free of coffee residue.
• Allow the filter holder to air dry completely before reassembling or storing.

Deep Cleaning (Periodically):

• Disassemble the stopper valve, spring, and rubber washer from the main filter basket (refer to Installation and Assembly section for reverse steps).
• Clean each component individually with warm, soapy water, paying close attention to any crevices where coffee oils or residue might accumulate.
• Use a small brush if necessary to clean the intricate parts of the stopper valve.
• Rinse all components thoroughly to remove any soap residue.
• Reassemble the filter holder only when all parts are completely dry.

5. Troubleshooting

If you encounter issues with your DGB-700FH Replacement Filter Holder, consult the following common troubleshooting tips:

• Filter Holder Does Not Fit: This filter holder is ONLY compatible with Cuisinart models DGB-700BC and DGB-900BC. Even if your coffeemaker appears similar, it may not fit other models. Double-check your coffeemaker's model number.
• Slow Drip or No Flow:
  • Ensure the stopper valve is clean and moves freely. Coffee grounds or residue can clog the mechanism.
  • Check that the rubber washer is correctly seated and not damaged.
  • Verify the spring is properly installed and provides adequate tension to the stopper.
• Leaking from Filter Holder:
  • Confirm the rubber washer is in place and undamaged. A missing or damaged washer can cause leaks.
  • Ensure the filter holder is correctly seated in the coffeemaker's brew basket.
  • Avoid overfilling the filter with coffee grounds, which can lead to overflow.
• Coffee Grounds in Brewed Coffee:
  • Ensure you are using the correct size and type of coffee filter for your coffeemaker.
  • Check for any cracks or damage to the filter holder itself.

6. Specifications

7. Warranty and Support

Specific warranty information for this replacement part may vary. Please refer to the original product documentation for your Cuisinart DGB-700BC or DGB-900BC coffeemaker, or contact Cuisinart customer support directly for details regarding replacement parts.

For further assistance or inquiries, please visit the official Cuisinart website or contact their customer service department.