Audison DRC MP Digital Remote Control User Manual

1. Introduction and Overview

The Audison DRC MP (Digital Remote Control Multimedia Play) is designed to provide comprehensive control over Audison car audio systems. It is compatible with all Audison electronics featuring the AC Link bus, allowing for seamless integration and enhanced user interaction within your vehicle's audio environment.

This digital remote control features a slim profile and includes a holder for flexible installation, enabling placement in the most convenient location within your car's interior. The device incorporates a 'Rubber Touch' finished joystick for precise four-directional control, facilitating navigation through the 'DRC Settings' menu. Furthermore, it supports the 'Navi Command' function, which is active when an Audison bit Play HD with video output is connected to a monitor, offering advanced multimedia control.

Figure 1: Audison DRC MP Digital Remote Control, front view.

2. Setup and Installation

2.1 Physical Installation

The DRC MP is supplied with a dedicated holder to assist with installation. Select a location within your vehicle that provides easy access and visibility without obstructing driving. Ensure the chosen surface is clean and stable for secure mounting of the holder.

2.2 Electrical Connection

Connect the DRC MP to your Audison electronics system via the AC Link bus. Refer to the specific installation manual of your Audison amplifier or processor for detailed wiring diagrams and connection procedures. Ensure all connections are secure to prevent intermittent operation.

2.3 Initial Power-Up

After physical installation and electrical connection, power on your Audison system. The DRC MP display should illuminate, indicating a successful connection. If the display does not activate, recheck all connections and ensure the main Audison unit is powered on.

Figure 2: Audison DRC MP unit, ready for installation.

3. Operating Instructions

3.1 Basic Controls

• Joystick: The central 'Rubber Touch' joystick allows for four-directional navigation (up, down, left, right) within menus and settings. Rotate the joystick to adjust values such as volume.
• ESC Button: Press the 'ESC' button to exit a menu or return to the previous screen.
• SEL Button: Press the 'SEL' button to confirm a selection or enter a menu option.

3.2 DRC Settings Menu

To access the 'DRC Settings' menu, use the joystick to navigate through the main display options. Once the 'Settings' option is highlighted, press the 'SEL' button to enter. Within this menu, you can adjust various parameters of your Audison system, such as input selection, volume levels, and equalizer presets. Use the joystick to scroll through options and modify values.

3.3 Navi Command Function

If your system includes an Audison bit Play HD connected to a monitor via video output, the 'Navi Command' function becomes available. This feature allows you to control multimedia playback and navigation functions directly from the DRC MP. Consult the Audison bit Play HD manual for specific instructions on utilizing this feature.

Figure 3: Close-up of the DRC MP display and control buttons.

4. Maintenance

4.1 Cleaning

To clean the DRC MP, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild, non-abrasive cleaner can be used, ensuring no liquid enters the device. Avoid using harsh chemicals or solvents, as these can damage the finish or internal components.

4.2 Battery Replacement

The DRC MP uses a CR2032 battery. If the device experiences intermittent power or the display dims, the battery may need replacement. Refer to the device's specific instructions for accessing and replacing the battery compartment. Ensure proper polarity when inserting the new battery.

4.3 General Care

Avoid exposing the DRC MP to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture. Do not attempt to disassemble the unit beyond battery replacement, as this may void the warranty and cause damage.

5. Troubleshooting

5.1 No Power/Display Off

• Check the AC Link bus connection to the main Audison unit. Ensure it is securely plugged in.
• Verify that the main Audison amplifier or processor is powered on.
• If applicable, check the internal CR2032 battery and replace if necessary.

5.2 No Response to Controls

• Ensure the DRC MP is properly connected to the Audison system via the AC Link bus.
• Restart the main Audison unit by cycling its power.
• Check for any physical obstructions around the joystick or buttons.

5.3 Incorrect Display Information

• This may indicate a communication issue. Power cycle the entire audio system.
• Ensure the DRC MP firmware is compatible with your Audison main unit. Consult Audison support if issues persist.

6. Specifications

7. Warranty Information

The Audison DRC MP Digital Remote Control is covered by a 1-Year Manufacturer Warranty. This warranty typically covers defects in materials and workmanship under normal use. For specific terms, conditions, and to initiate a warranty claim, please retain your proof of purchase and contact Audison customer support or an authorized dealer.

The warranty does not cover damage caused by improper installation, accident, misuse, abuse, negligence, unauthorized modification, or normal wear and tear.

8. Support and Contact

For further assistance, technical support, or inquiries regarding your Audison DRC MP, please contact Audison customer service or visit the official Audison website. You can typically find contact information and support resources on the manufacturer's official product pages or in the documentation provided with your main Audison audio system.

When contacting support, please have your product model (DRC-MP) and any relevant purchase information ready to facilitate a quicker resolution.