1. Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your Legrand LEG97613 Push Switch for roller blinds. This device is designed for centralized control of roller blinds, offering a convenient solution for managing light and privacy in your space. Please read this manual thoroughly before installation and use to ensure safe and correct operation.
Figure 1: Front view of the Legrand LEG97613 Push Switch. This image displays the front of the Legrand LEG97613 push switch. It features two distinct white buttons. The left button has an upward arrow, and the right button has a downward arrow, with 'STOP' text centered between them, indicating control for roller blinds.
2. Safety Information
WARNING: Electrical shock hazard. Improper installation can lead to serious injury or death. Always follow these safety guidelines:
- Disconnect power at the circuit breaker or fuse box before installing or servicing the switch.
- Ensure all wiring connections are secure and comply with local electrical codes.
- Do not exceed the maximum load rating of 1380 watts (10 amps).
- If you are unsure about any part of the installation process, consult a qualified electrician.
- This device is designed for indoor use only.
3. Package Contents
The package for your Legrand LEG97613 Push Switch should contain the following items:
- 1 x Legrand LEG97613 Push Switch (White housing)
Note: Mounting screws are not included and must be supplied separately.
Figure 2: Legrand LEG97613 Push Switch in packaging. An angled perspective of the Legrand LEG97613 push switch, still partially encased in its clear protective packaging. The side of the switch clearly shows the Legrand brand logo, confirming its authenticity.
4. Setup and Installation
The Legrand LEG97613 Push Switch is designed for wall-mount installation. It is crucial to follow these steps carefully to ensure proper and safe operation.
- Power Disconnection: Before beginning any electrical work, locate the circuit breaker or fuse that supplies power to the installation area and turn it OFF. Verify that the power is off using a voltage tester.
- Prepare Wiring: Ensure that the existing wiring in your wall box is suitable for a roller blind switch. The switch is rated for 10 amps and a maximum of 1380 watts.
- Mounting: Secure the switch mechanism into the wall box using appropriate mounting screws (not supplied). Ensure it is firmly seated and level.
- Wire Connections: Connect the electrical wires to the terminals on the back of the switch according to the wiring diagram provided with your roller blind motor or specific installation instructions. Typically, this involves live, neutral, and two control wires for up/down movement. Ensure all connections are tight and secure.
- Faceplate Installation: Once wiring is complete and secure, attach the decorative faceplate (if separate) to the switch mechanism.
- Restore Power: Turn the power back ON at the circuit breaker or fuse box.
- Test Operation: Test the switch to ensure your roller blinds operate correctly.
It is highly recommended to have this installation performed by a qualified electrician to prevent electrical hazards and ensure compliance with all applicable electrical codes.
5. Operating Instructions
The Legrand LEG97613 Push Switch provides intuitive control for your roller blinds. The switch features two main buttons and a central 'STOP' function.
- Raise Blinds: Press the button with the upward arrow to raise your roller blinds. Release the button when the blinds reach the desired height or fully open.
- Lower Blinds: Press the button with the downward arrow to lower your roller blinds. Release the button when the blinds reach the desired position or fully close.
- Stop Blinds: To stop the roller blinds at any intermediate position, press the central 'STOP' button.
This switch enables centralized control, allowing you to manage your roller blinds with ease.
6. Maintenance and Care
The Legrand LEG97613 Push Switch requires minimal maintenance to ensure its longevity and proper function.
- Cleaning: To clean the switch, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the plastic finish or internal components.
- Inspection: Periodically inspect the switch for any signs of damage, loose connections, or unusual operation. If any issues are observed, disconnect power and consult a qualified electrician.
7. Troubleshooting
If you encounter issues with your Legrand LEG97613 Push Switch, consider the following common troubleshooting steps:
- Blinds Not Responding:
- Check if the circuit breaker supplying power to the switch is ON.
- Ensure all wiring connections are secure. Loose connections can prevent operation.
- Verify that the roller blind motor is functioning correctly.
- Intermittent Operation:
- This could indicate a loose wire connection. Disconnect power and re-check all terminals.
- Ensure the switch is not overloaded beyond its 1380-watt capacity.
If these steps do not resolve the issue, it is recommended to contact a qualified electrician or Legrand customer support for further assistance.
8. Technical Specifications
Figure 3: Legrand LEG97613 Push Switch with size reference. This image provides a size reference for the Legrand LEG97613 push switch, shown held in a human hand. Overlaid measurements indicate the switch's height is approximately 3.0 inches (7 cm), illustrating its compact design.
| Feature | Specification |
|---|---|
| Manufacturer | Legrand |
| Model Number | LEG97613 |
| Item Weight | 2.11 ounces |
| Package Dimensions | 2.83 x 2.83 x 1.18 inches |
| Color | White |
| Material | Plastic |
| Wattage | 1380 watts |
| Current Rating | 10 amps |
| Item Package Quantity | 1 |
| Mounting Type | Wall Mount |
| Switch Style | Push Switch |
| Certification | Nf |
| Batteries Included | No |
| Batteries Required | No |
| Compatible Devices | All (Roller Blinds) |
| Power Plug Type | No Plug |
9. Warranty and Support
Legrand products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Legrand website.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact Legrand customer service through their official channels. Contact information can typically be found on the Legrand website or product packaging.
