1. Introduction
This manual provides detailed instructions for the Waveshare 7-inch Capacitive Touch Screen LCD, Model 7inch HDMI LCD (C)-1. This display features a 1024x600 resolution IPS panel with 5-point capacitive touch control. It is designed for broad compatibility, supporting various Raspberry Pi models (including Pi 5/4B/3B+/3A+/2B/B+/A+/Zero/Zero W/WH/Zero 2W CM3+/4) and functioning as a secondary monitor for Windows 11/10/8.1/8/7 systems without requiring additional drivers for touch functionality.
Image 1: Waveshare 7-inch LCD connected to a Raspberry Pi, displaying the Raspberry Pi OS desktop.
2. Key Features
- 7-inch IPS screen with a hardware resolution of 1024×600 pixels.
- 5-point capacitive touch control for intuitive interaction.
- Compatible with Raspberry Pi: Supports Raspberry Pi OS, Ubuntu, Kali, and Retropie.
- Compatible with Windows: Functions as a computer monitor for Windows 11/10/8.1/8/7, offering 5-point touch without driver installation.
- HDMI interface for video input.
- USB interface for touch functionality and power.
- Adjustable backlight control for power saving.
- Wide 170° viewing angle.
Video 1: Overview of the 7-inch HDMI LCD (C) display, showcasing its resolution, IPS panel, low power consumption, wide viewing angle, and 5-point capacitive touch capabilities.
Image 2: Visual representation of the display's specifications including 7-inch size, 1024x600 resolution, HDMI interface, IPS panel, 170° viewing angle, capacitive 5-point touch, USB touch port, low power consumption, and CE certification.
3. Setup Instructions
3.1 Connecting to Raspberry Pi
- Connect the HDMI cable from the Raspberry Pi to the display's HDMI port.
- Connect the USB cable from the Raspberry Pi's USB port to the display's Micro USB port (labeled 'Touch' or '5V'). This provides power and enables touch functionality.
- Ensure your Raspberry Pi's power supply is adequate. For some models, increasing the USB current limit in
config.txtmay be necessary (e.g.,max_usb_current=1). - For optimal display and touch performance, especially with specific resolutions or rotations, you may need to modify the
config.txtfile on your Raspberry Pi's boot partition. Common settings include:hdmi_group=2hdmi_mode=87hdmi_cvt=1024 600 60 6 0 0 0
- Reboot the Raspberry Pi after modifying
config.txt.
3.2 Connecting to Windows PC
- Connect the HDMI cable from your PC to the display's HDMI port.
- Connect the USB cable from your PC's USB port to the display's Micro USB port. This provides power and enables touch functionality.
- The display should be recognized automatically by Windows, and 5-point touch functionality will be available without additional driver installation.
- If using as a secondary monitor, ensure the Waveshare display is set as the primary display in Windows settings for full touch functionality.
Image 3: Connection diagrams illustrating how to connect the 7-inch LCD to various Raspberry Pi models and a Mini PC, highlighting HDMI and USB connections.
4. Operating Instructions
4.1 Basic Operation
Once connected and powered, the display will automatically show the video output from your connected device. The capacitive touch screen allows for direct interaction with the operating system.
4.2 Touch Control
The display supports up to 5-points capacitive touch, enabling multi-touch gestures depending on the operating system. For Raspberry Pi, ensure the necessary software configurations are applied for touch input. For Windows, touch is generally plug-and-play.
Image 4: Demonstration of 5-point capacitive touch control on the display, alongside a diagram detailing the physical dimensions of the unit.
4.3 Backlight Control
The display features a physical backlight switch for convenient control, allowing users to turn the backlight on or off to save power. Additionally, there are backlight adjustment pads on the PCB for fine-tuning brightness via PWM signal input, which can also help increase the display's lifespan.
5. Maintenance
5.1 Cleaning
To clean the screen, gently wipe it with a soft, lint-free cloth. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaning solution. Avoid using harsh chemicals, abrasive materials, or excessive moisture.
5.2 Handling and Storage
Handle the display with care to prevent damage to the screen or the PCB. Avoid applying excessive pressure to the screen. When not in use, store the display in a clean, dry environment away from direct sunlight and extreme temperatures.
5.3 Backlight Longevity
Utilize the backlight control features to adjust brightness as needed. Reducing brightness when full illumination is not required can contribute to the overall lifespan of the display's backlight.
6. Troubleshooting
6.1 Display Not Showing Image
- Verify that both the HDMI and USB cables are securely connected to both the display and the host device.
- Ensure the host device (Raspberry Pi, PC) is powered on and outputting video.
- Check the backlight switch on the display to ensure it is in the 'ON' position.
- If using with Raspberry Pi, confirm that the
config.txtsettings for resolution (hdmi_group,hdmi_mode,hdmi_cvt) are correctly applied and compatible with the display.
6.2 Touch Screen Not Responding
- Ensure the USB cable, which carries touch data, is properly connected to both the display and the host device.
- For Raspberry Pi, verify that the operating system has the correct drivers or configurations for touch input. Refer to the online user manual for specific software setup.
- If connecting to a Windows PC with multiple monitors, ensure the Waveshare display is set as the primary monitor for touch functionality to work correctly.
- If the touch screen is unresponsive or inaccurate, especially near corners, recalibration may be required by the operating system.
6.3 Ghosting or Flickering Images
- If ghosting occurs with Raspberry Pi, ensure the power supply is sufficient. Increasing the USB amperage limit in
config.txt(e.g.,max_usb_current=1) can resolve this. - If flickering ghost images appear after prolonged use with incompatible output, power off the display and leave it idle for approximately 12 hours. This often resolves the issue.
6.4 Raspberry Pi WiFi Issues
- Some users have reported WiFi dongle issues when the screen is connected to a Raspberry Pi. This may be due to power draw or interference. Try using a separate powered USB hub for the display or other peripherals if this occurs.
For further assistance, please consult the comprehensive online user manual provided by Waveshare.
7. Specifications
| Feature | Detail |
|---|---|
| Screen Size | 7 Inches |
| Resolution | 1024 x 600 |
| Display Panel Type | IPS |
| Touch Type | Capacitive, 5-points |
| Display Interface | HDMI |
| Touch Interface | USB |
| Operating System Compatibility | Raspberry Pi OS, Ubuntu, Kali, Retropie, Windows 11/10/8.1/8/7 |
| Item Model Number | 7inch HDMI LCD (C)-1 |
| Item Weight | 10.6 ounces |
| Product Dimensions (LxWxH) | 3.94 x 7.09 x 3.54 inches |
| Manufacturer | Waveshare |
8. Warranty and Support
Waveshare is committed to providing quality products and customer service. For support related to your 7-inch Capacitive Touch Screen LCD, please refer to the following:
- Online User Manual: A comprehensive online user manual is available for detailed setup guides, software configurations, and advanced usage scenarios. Please check the official Waveshare website for the most up-to-date documentation.
- Technical Service: Waveshare offers one-to-one technical support with a 24-hour response time for inquiries.
- Product Guarantee: The product includes a 30-day free replacement policy and 365 days of free repair service. Lifetime technical service is also provided.
For specific warranty claims or technical assistance, please contact Waveshare customer support through their official channels.
Image 5: Overview of Waveshare's commitment to quality, including rigorous testing, dedicated technical support, and comprehensive service policies.
