Retevis USJ6247A

Retevis Six Way Multi Unit Charger Instruction Manual

Model: USJ6247A

1. Introduction

Thank you for choosing the Retevis Six Way Multi Unit Charger. This charger is designed to efficiently charge up to six two-way radio batteries or radios simultaneously, providing a convenient and organized charging solution for compatible models such as Baofeng UV-5R, BF-F8HP, Retevis RT-5R, RT-5RV, and TYT TH-F8. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your device.

2. Product Overview

2.1 Package Contents

  • Retevis Six Way Multi Unit Charger Base
  • AC Power Adapter (100V-240V input)

2.2 Key Features

  • Simultaneous charging for up to six radios or batteries.
  • Compatible with various two-way radio models.
  • Universal voltage input (100V-240V) for global use.
  • LED indicators for charging status.
  • Wall-mountable design for space-saving installation.

2.3 Component Identification

Retevis Six Way Multi Unit Charger with AC Power Adapter
Figure 1: Retevis Six Way Multi Unit Charger with AC Power Adapter. The image shows the charger base and its power adapter, highlighting the 100V-240V input range and nail holes for wall mounting.
  • Charging Slots: Six individual slots for radios or batteries.
  • Power Interface: Port on the side of the charger for connecting the AC power adapter.
  • LED Indicators: Located next to each charging slot, indicating charging status.
  • Nail Holes: Pre-drilled holes on the charger base for wall mounting.
  • Sliding Brackets: Located on the underside of the charger for stability or alternative mounting.
  • Base Wads: Rubber feet on the underside to prevent slipping and reduce wear.
Close-up of the power interface on the Retevis Six Way Multi Unit Charger
Figure 2: Close-up view of the power interface on the charger, where the AC adapter connects.
Underside view of the Retevis Six Way Multi Unit Charger showing sliding brackets and base wads
Figure 3: Underside of the charger, illustrating the sliding brackets for stability and base wads to protect the surface and prevent movement.

3. Setup Instructions

  1. Unpack the Charger: Carefully remove the charger base and AC power adapter from the packaging.
  2. Connect Power Adapter: Insert the DC plug of the AC power adapter into the power interface on the side of the charger base.
  3. Connect to Power Outlet: Plug the AC power adapter into a standard wall outlet (100V-240V).
  4. Placement: Place the charger on a flat, stable surface, ensuring adequate ventilation. Alternatively, the charger can be wall-mounted using the integrated nail holes.
Retevis Six Way Multi Unit Charger ready for use
Figure 4: The multi-unit charger connected to its power adapter, ready for radio or battery insertion.

4. Operating Instructions

4.1 Charging Radios or Batteries

  1. Ensure the charger is properly connected to a power source.
  2. Carefully insert a compatible two-way radio or its battery pack into an available charging slot. Ensure the radio/battery is seated firmly and correctly aligned with the charging contacts.
  3. The LED indicator next to the slot will illuminate to show the charging status.
  4. Once charging is complete, the LED indicator will change color.
  5. Remove the radio or battery from the slot when fully charged.
Two-way radio and battery being charged in the Retevis Six Way Multi Unit Charger
Figure 5: A two-way radio and a separate battery pack inserted into the charging slots, demonstrating proper placement.
Multiple two-way radios and batteries charging in the Retevis Six Way Multi Unit Charger
Figure 6: The charger with multiple two-way radios and battery packs actively charging.

4.2 LED Indicator Status

  • Red Light: Indicates the battery is currently charging.
  • Green Light: Indicates the battery is fully charged.
  • Yellow Light (if observed): Some users have reported observing a yellow light. This typically indicates a charging fault, an incompatible battery, or a battery that is not properly seated. If a yellow light persists, refer to the troubleshooting section.
Retevis Six Way Multi Unit Charger with red LED indicators showing active charging
Figure 7: The charger displaying red LED lights, indicating that the inserted batteries are actively charging.

5. Maintenance

  • Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
  • Storage: When not in use, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspection: Periodically inspect the power adapter cord for any signs of damage. If damaged, discontinue use and replace with an authorized Retevis adapter.

6. Troubleshooting

Problem Possible Cause Solution
No LED light when radio/battery is inserted.
  • Charger not powered.
  • Radio/battery not properly seated.
  • Incompatible radio/battery.
  • Faulty charging slot.
  • Ensure power adapter is securely connected to charger and wall outlet.
  • Re-insert the radio/battery, ensuring firm contact.
  • Verify compatibility with the charger.
  • Try a different charging slot. If issue persists across multiple slots, contact support.
LED remains red after extended charging time.
  • Battery not fully charging.
  • Faulty battery.
  • Charger malfunction.
  • Ensure battery is compatible and not excessively old/damaged.
  • Try charging a different battery.
  • If multiple slots exhibit this behavior, contact support.
Yellow LED light appears.
  • Charging fault.
  • Incompatible battery.
  • Battery not properly seated.
  • Remove and re-insert the battery.
  • Verify battery compatibility.
  • Try a different charging slot. If the issue persists, contact support.
Radios do not fit into charging slots.
  • Incompatible radio model.
  • Ensure your radio model is listed as compatible. This charger is designed for specific models like Baofeng UV-5R, BF-F8HP, Retevis RT-5R, RT-5RV, and TYT TH-F8.

7. Specifications

Model Number USJ6247A
Product Dimensions 19.29 x 2.36 x 4.33 inches
Item Weight 2.09 pounds (950 Grams)
Input Voltage 100-240 Volts AC
Output Voltage 7.2 Volts DC
Color Black
Manufacturer Retevis

8. Warranty and Support

Retevis products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your Retevis Six Way Multi Unit Charger, please contact Retevis customer service through their official website or the retailer where the product was purchased. Please have your model number (USJ6247A) and purchase details ready when contacting support.

For more information, visit the official Retevis store: Retevis Store on Amazon

© 2023 Retevis. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.