LEDVANCE 75156
Sylvania 75156 LED HID Replacement Ultra Lamp User Manual
Model: 75156
Product Overview
The Sylvania ultra LED high lumen lamp is a self-ballasted medium base HID replacement lamp. It is designed for easy installation and is ideal for indoor high/low bay lighting and outdoor decorative post top fixtures in walkway lighting applications. This lamp provides excellent color rendering (82 CRI) compared to traditional high pressure sodium and metal halide lamps, offering a 3000K color temperature. Its optical design efficiently directs light output in a 360-degree (omnidirectional) beam angle with Type V distribution, making it suitable for both indoor and outdoor dry applications. The lamp is IP60 rated and operates on 120/277V input voltage. It is important to note that this lamp is not dimmable.
Figure 1: Sylvania 75156 LED HID Replacement Ultra Lamp, front view.
Setup and Installation
The Sylvania 75156 Ultra LED lamp is designed for easy installation as a self-ballasted medium base HID replacement. Proper installation ensures optimal performance and safety.
Important Considerations Before Installation:
- Bypass Existing HID Ballast: The existing HID ballast in your fixture must be bypassed before installing this LED lamp. Failure to do so can damage the lamp and void the warranty.
- Verify Fixture Size: Ensure the physical dimensions of your fixture can accommodate the lamp (4.52 x 4.52 x 13.19 inches).
- Operating Temperature: The lamp is designed to operate within a temperature range of -40°F to +130°F (-40°C to +54°C).
- Environmental Suitability: Suitable for indoor and outdoor use in dry applications only. Not suited for outdoor fixtures with air vents that expose the lamp directly to water/humidity. Should not be directly exposed to water/humidity.
- Enclosed Fixtures: Can be used in enclosed fixtures.
- Non-Dimmable: This lamp is not intended for use with dimming applications.
Installation Steps:
- Power Off: Before beginning any installation, ensure the power to the fixture is completely turned off at the circuit breaker.
- Remove Old Lamp: Carefully remove the existing HID lamp from the fixture.
- Bypass Ballast: Follow proper electrical safety procedures to bypass the existing HID ballast. This typically involves rewiring the fixture to connect the lamp holder directly to the main power supply (120V/277V). If unsure, consult a qualified electrician.
- Install LED Lamp: Screw the Sylvania 75156 LED lamp into the medium base (E26) lamp holder until snug. Do not overtighten.
- Restore Power: Once the lamp is securely installed and the ballast is bypassed, restore power to the fixture.
Figure 2: Sylvania 75156 LED HID Replacement Ultra Lamp packaging, showing IP60 rating and non-dimmable feature.
Operating Instructions
The Sylvania 75156 LED HID Replacement Ultra Lamp operates immediately upon receiving power. It is designed for straightforward use in various lighting applications.
- Power On/Off: Control the lamp's operation using the standard light switch connected to the fixture's power supply.
- Light Output: Provides 5000 lumens of bright white light (3000K color temperature) with an 82 CRI for excellent color rendering.
- Beam Angle: Features a 360-degree (omnidirectional) beam angle with Type V distribution, suitable for broad illumination.
- Energy Efficiency: Consumes 50 watts, offering significant energy savings compared to traditional HID lamps.
Maintenance
The Sylvania 75156 LED lamp is designed for long-term, low-maintenance operation. Regular cleaning can help maintain optimal light output.
- Cleaning: Ensure the lamp is cool and the power is off before cleaning. Gently wipe the lamp's surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the lamp and fixture for any signs of damage or loose connections.
- Lamp Life: The lamp has an average life of up to 50,000 hours, significantly reducing the need for frequent replacements.
Troubleshooting
If you encounter issues with your Sylvania 75156 LED lamp, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. |
|
|
| Lamp flickers or dims. |
|
|
| Lamp overheats. |
|
|
For issues not resolved by these steps, please contact customer support.
Specifications
| Attribute | Detail |
|---|---|
| Model Name | SYLVNIA LED HID Replacement |
| Part Number | 75156 |
| Brand | LEDVANCE (Sylvania) |
| Light Type | LED |
| Wattage | 50 watts |
| Brightness | 5000 Lumens |
| Color Temperature | 3000 Kelvin (Bright White) |
| Color Rendering Index (CRI) | 82 |
| Bulb Base | E26 (Medium Base) |
| Bulb Shape Size | G40 (Corn Shape) |
| Voltage | 120 Volts (also accepts 100 to 240 Volts) |
| Frequency | 50 Hertz to 60 Hertz |
| Special Feature | Not Dimmable |
| Indoor/Outdoor Usage | Outdoor, Indoor (Dry applications only) |
| IP Rating | IP60 |
| Average Life | 50,000 Hours |
| Material | Plastic (Heat and impact resistant, UV protected, non-yellowing polycarbonate lens/reflector) |
| Product Dimensions | 4.52 x 4.52 x 13.19 inches |
| Item Weight | 2.64 pounds |
| Certifications | ETL listed for Damp locations |
Warranty and Support
Sylvania provides a warranty for this product. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Sylvania website.
For customer questions or support in the US and Canada, please call:
1-800-LIGHTBULB (1-800-544-4828)
You may also find additional support and resources on the LEDVANCE Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.