Genesis 6-Inch Clip Convertible Table-Top & Clip Fan User Manual

Introduction

Thank you for purchasing the Genesis 6-Inch Clip Convertible Table-Top & Clip Fan. This energy-efficient personal fan features an innovative design, allowing it to be used as both a clip-on fan and a table-top fan. With two quiet speeds and an adjustable head, it provides versatile cooling for your home, office, dorm, or any personal space. This fan is ETL listed and includes overload safety protection with a built-in power plug fuse.

Image: The Genesis 6-Inch Clip Convertible Fan in black, demonstrating its clip-on functionality.

Safety Information

WARNING: To reduce the risk of fire or electric shock, do not expose this fan to rain or moisture.

• Always unplug the fan before cleaning or performing any maintenance.
• Do not operate the fan with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• Do not insert fingers or foreign objects into any opening of the fan.
• Ensure the fan is placed on a stable, level surface when used as a table-top fan.
• When using as a clip-on fan, ensure the clip is securely fastened to a stable surface between 1.06 inches and 1.65 inches thick.

Package Contents

Please check the package for the following items:

• Genesis 6-Inch Fan Unit
• Clip Attachment
• Table-Top Base
• Butterfly Screw (pre-attached to fan head)

Setup

Converting Between Clip-On and Table-Top Modes

1. To attach the Table-Top Base:
   • Locate the butterfly screw on the fan head.
   • Loosen the butterfly screw.
   • Align the table-top base with the fan head's attachment point.
   • Insert the base and tighten the butterfly screw securely to hold the base in place.
2. To attach the Clip:
   • Locate the butterfly screw on the fan head.
   • Loosen the butterfly screw.
   • Align the clip attachment with the fan head's attachment point.
   • Insert the clip and tighten the butterfly screw securely to hold the clip in place.

Image: The Genesis 6-Inch Fan configured for table-top use.

Image: The Genesis 6-Inch Fan securely clipped onto the edge of a desk.

Adjusting the Fan Head

The fan head can be adjusted to various angles to direct airflow. Gently tilt the fan head up or down to achieve your desired position. The joint is designed to hold its position once set.

Operating Instructions

1. Power Connection: Plug the fan's power cord into a standard 120V AC electrical outlet.
2. Turning On/Off and Speed Selection:

   The fan features a push-button switch for operation. Press the button to cycle through the settings:

   • First Press: Low Speed
   • Second Press: High Speed
   • Third Press: Off

Image: Icon indicating two fan speeds.

Maintenance

Cleaning

• Always unplug the fan from the power outlet before cleaning.
• Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
• To clean the fan blades, you may need to carefully remove the front grille. Refer to the assembly instructions in reverse for safe removal and reattachment.
• Ensure all parts are completely dry before plugging the fan back in.

Storage

When not in use, store the fan in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.

Troubleshooting

Specifications

• Model Name: Genesis 6-Inch Clip-On Fan
• Model Number: A1CLIPFANBLACK
• Color: Black
• Product Dimensions: 5"D x 6"W x 10"H
• Item Weight: 1.9 Pounds
• Power Source: Corded Electric
• Voltage: 120 Volts
• Wattage: 5 watts
• Number of Blades: 3
• Blade Length: 6 Inches
• Cable Length: 5 Feet
• Switch Type: Push Button
• Number of Power Levels: 2
• Material: Plastic
• Certification: ETL Listed

Image: Diagram illustrating the key features and dimensions of the Genesis 6-Inch Fan.

Warranty and Support

Genesis products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Genesis website. Please retain your proof of purchase for warranty claims.

For further assistance, you may contact Genesis customer service through their official channels.