Wiltec Automatic Incubator for 48 Eggs

Introduction

The Wiltec Automatic Incubator is designed for efficient and reliable hatching of up to 48 eggs. It features a fully automatic turning system, precise temperature and humidity control, and an integrated fan for optimal air circulation. This manual provides detailed instructions for setting up, operating, and maintaining your incubator to achieve successful hatching results.

Image: The Wiltec Automatic Incubator, a compact device with a yellow top cover, clear base, and a control panel featuring digital displays for temperature and humidity.

Safety Information

• Always ensure the incubator is placed on a stable, level surface away from direct sunlight, drafts, and extreme temperature fluctuations.
• Do not immerse the unit in water or any other liquid.
• Keep out of reach of children and pets.
• Disconnect from power supply before cleaning or performing any maintenance.
• Ensure proper ventilation around the unit.
• Use only the specified voltage (230 Volts).

Product Components

Familiarize yourself with the main components of your incubator:

Image: An exploded diagram showing the various parts of the incubator. These include the fan, lid, control panel, upper grid insert, egg turning tray, turning motor, lower grid insert, incubation container, and insulation box.

• Lid: Top cover with integrated fan and control panel.
• Control Panel: Features LED displays for temperature and humidity, and control buttons.
• Fan: Ensures uniform air distribution within the incubation chamber.
• Egg Turning Tray: Holds eggs and automatically turns them.
• Turning Motor: Powers the automatic egg turning mechanism.
• Incubation Container: The main transparent chamber where eggs are placed.
• Insulation Box: Provides additional insulation for stable conditions.
• Water Channels: Located at the bottom of the incubation container for humidity regulation.

The package also includes several accessories to assist with the incubation process:

Image: A visual representation of the accessories included with the incubator: a spray bottle, an egg turning insert, a feeder, a water bottle, a water dispenser, an LED candling lamp, and a spare grid insert.

• Spray Bottle: For misting eggs or adding water.
• Egg Turning Insert: The main tray for holding and turning eggs.
• Feeder: For feeding newly hatched chicks.
• Water Bottle: For refilling water channels.
• Water Dispenser: For providing water to chicks.
• LED Candling Lamp: For inspecting egg development.
• Spare Grid Insert: An additional grid for versatility.

Setup

1. Unpacking: Carefully remove all components from the packaging. Inspect for any damage.
2. Assembly:
   • Place the insulation box on a stable, level surface.
   • Insert the incubation container into the insulation box.
   • Place the lower grid insert at the bottom of the incubation container.
   • Position the egg turning tray on top of the lower grid.
   • Place the upper grid insert on top of the egg turning tray.
   • Carefully place the lid with the control panel on top of the assembled unit, ensuring it fits securely.
3. Placement: Choose a location with a stable ambient temperature, away from direct sunlight, drafts, and heat sources.
4. Power Connection: Connect the power cord to the incubator and then plug it into a suitable 230V power outlet. The display will light up.
5. Water Filling: Fill the water channels at the bottom of the incubation container with distilled or demineralized water using the provided water bottle. This is crucial for humidity regulation. Start with a small amount and adjust as needed.

Operating Instructions

Initial Settings and Pre-heating

1. Set Temperature: The integrated temperature control allows precise adjustment. The recommended temperature for most poultry eggs is between 37.5°C and 38°C. Adjust the temperature using the control panel buttons. The current values are clearly displayed on the LED screen.
2. Humidity Regulation: The incubator features humidity regulation. Monitor the humidity level on the LED display. Adjust humidity by adding or removing water from the water channels.
3. Pre-heating: Allow the incubator to run for at least 2-3 hours (or preferably 24 hours) with the desired temperature and humidity settings before placing eggs inside. This stabilizes the internal environment.

Egg Placement and Incubation

1. Egg Selection: Use clean, fertile eggs of appropriate size for the incubator. The incubator can hold up to 48 standard chicken eggs.
2. Placing Eggs: Carefully place the eggs into the designated slots in the egg turning tray.
3. Automatic Turning System: The incubator features a fully automatic turning system that ensures eggs are turned regularly without manual intervention. This automatic function promotes even heating and optimal embryo development. The system typically turns eggs every 90 minutes.
   

   Image: A close-up view of the automatic egg turning mechanism, showing how the egg tray rotates to gently turn the eggs.

4. Monitoring: Continuously monitor the temperature and humidity levels on the LED display. The large observation window allows you to check the progress of the incubation process without opening the machine, helping to maintain stable conditions.
5. Candling Eggs: Use the included LED candling lamp to periodically check the development of the embryos. This allows you to identify infertile eggs or those with arrested development.
   

   Image: The incubator shown with an LED candling lamp, illustrating different stages of embryo development visible through candling.

6. Stopping Rotation: Stop the automatic egg rotation 3-4 days before the expected hatching date. This allows the chicks to position themselves for hatching.
7. Hatching: During the last few days, increase humidity slightly. Do not open the incubator frequently during hatching to maintain stable conditions.

Maintenance

• Cleaning: After each incubation cycle, disconnect the power and thoroughly clean all parts of the incubator. Use a mild disinfectant solution. Ensure all components are completely dry before reassembly or storage.
• Water Channels: Regularly clean the water channels to prevent algae or bacterial growth.
• Storage: Store the incubator in a dry, clean, and dust-free place, protected from extreme heat and direct sunlight.

Troubleshooting

If you encounter issues not listed here or if the problem persists, please contact Wiltec customer support.

Specifications

Image: A diagram illustrating the dimensions of the Wiltec Automatic Incubator: 500 mm length, 475 mm width, and 245 mm height.

Warranty

Wiltec products are manufactured with high-quality materials and undergo strict quality control. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official Wiltec website.

Support

For technical assistance, spare parts, or any questions regarding your Wiltec Automatic Incubator, please contact Wiltec customer support. You can find contact information on the official Wiltec website or through your point of purchase.

Visit the Wiltec Store: Wiltec Amazon Store