GOBE 72mm UV Filter (2Peak) Instruction Manual

Introduction

The Gobe 72mm Ultraviolet (UV) filter is designed to provide continuous protection for your camera lenses while enhancing image clarity. This filter can remain installed on your lenses without affecting exposure settings or introducing additional coloration or contrast to your photographs.

It is engineered to minimize concerns about protecting valuable lenses during various shooting conditions, including snow, near water, rain, or dusty environments. The filter ensures your lenses remain safe without compromising image quality.

Featuring a Multi-Resistant Coating (MRC), this filter significantly reduces lens reflections and ghosting. The MRC also provides protection against scratches, acts as a water repellent, and resists dust and grease, making it ideal for outdoor photography.

Constructed with premium Japanese optical glass, the Gobe UV filter is optically invisible, reflecting only a minimal amount of light from very bright sources. Its advanced coating layers ensure high visible light transmission of up to 99.6% and an excellent reduction of ultraviolet rays, allowing only 0.02% of UV light (up to 321nm) to pass through.

Setup

1. Identify Your Lens Filter Size

Before attaching the Gobe UV filter, ensure you have the correct size for your camera lens. The filter size is typically indicated by a diameter symbol (⌀) followed by a number (e.g., ⌀72mm). This information can usually be found on the front or side of your lens barrel.

Image: Diagram showing how to locate the filter size on a camera lens.

2. Attaching the Filter

1. Carefully align the Gobe UV filter with the filter threads on the front of your camera lens.
2. Gently rotate the filter clockwise until it catches the threads.
3. Continue to turn the filter until it is securely fastened. Do not overtighten, as this can make removal difficult.
4. Ensure the filter is seated evenly and there are no gaps between the filter and the lens barrel.

Operating Instructions

The Gobe 72mm UV Filter (2Peak) is designed for continuous use. Once attached, it provides constant protection and optical benefits without requiring frequent removal.

Image: The Gobe 72mm UV Filter (2Peak).

Key Benefits During Operation:

• Lens Protection: The filter acts as a physical barrier, protecting your valuable lens front element from dust, scratches, moisture, and accidental impacts.
• UV Ray Reduction: It effectively blocks harmful ultraviolet light, which can cause haze and reduced contrast in photographs, especially in bright outdoor conditions or at high altitudes.
• Enhanced Image Clarity: By reducing UV haze, the filter contributes to sharper images with improved contrast and color fidelity.
• No Exposure Impact: The filter is optically neutral and does not require any adjustments to your camera's exposure settings.
• Multi-Resistant Coating (MRC): The 16-layer nano-coating minimizes internal reflections and ghosting, ensuring optimal image quality even when shooting towards bright light sources. It also makes the filter water-repellent and resistant to smudges and dirt.

Maintenance

Cleaning the Filter

Regular cleaning of your Gobe UV filter is essential to maintain optimal image quality and prolong its lifespan. The Multi-Resistant Coating (MRC) makes cleaning easier.

1. Gently brush off any loose dust or debris from the filter surface using a soft lens brush or a blower.
2. Apply a small amount of lens cleaning solution to a clean microfiber cleaning cloth. Do not apply solution directly to the filter.
3. Wipe the filter surface in a circular motion, starting from the center and moving outwards, until clean.
4. Use the provided Gobe cleaning cloth for best results.

Image: Gobe branded cleaning cloth.

Storage

When not in use, or if you need to remove the filter, store it in its protective case to prevent damage.

Image: Gobe UV filter stored in its protective metal case.

• Always place the filter back into its original metal case or a dedicated filter pouch.
• Store the case in a dry, cool place away from direct sunlight and extreme temperatures.
• Avoid storing the filter loose in a camera bag where it could be scratched or damaged by other equipment.

Troubleshooting

• Problem: Filter is difficult to attach or remove.
  Solution: Ensure the filter is aligned correctly with the lens threads. Avoid overtightening. If stuck, use a rubber grip or a specialized filter wrench for gentle removal.
• Problem: Image quality appears degraded (e.g., blurry, reflections).
  Solution: Check if the filter is clean. Dust, smudges, or fingerprints can significantly impact image quality. Refer to the Maintenance section for cleaning instructions. Ensure the filter is securely and evenly attached to the lens.
• Problem: Unexpected color casts or reduced contrast.
  Solution: The Gobe UV filter is designed to be color-neutral. If you observe color casts, ensure your camera's white balance settings are appropriate for the lighting conditions. Verify that the filter is clean and free from any residue.
• Problem: Vignetting (darkening at image corners).
  Solution: While the Gobe 2Peak filters are designed to be slim and minimize vignetting, it can occasionally occur with very wide-angle lenses, especially when stacking multiple filters. If vignetting is present, consider removing any additional filters or using a wider lens.

Specifications

Warranty Information

The Gobe 72mm UV Filter (2Peak) is covered by a lifetime warranty. This warranty ensures that your filter is free from defects in materials and workmanship under normal use. For detailed terms and conditions, please refer to the official Gobe website or contact customer support.

Customer Support

For further assistance, technical inquiries, or warranty claims regarding your Gobe 72mm UV Filter (2Peak), please visit the official Gobe website or contact their customer support team. Contact information can typically be found on the Gobe website's 'Support' or 'Contact Us' section.

Online Resources:

• Official Gobe Website: Visit Gobe Store on Amazon