1. Introduction
Thank you for choosing the SR SUN RISE SRSH-F5043 Rain Mixer Shower System. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new shower system. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image 1.1: The SR SUN RISE SRSH-F5043 10-Inch Polished Chrome Rain Mixer Shower System.
2. Safety Information
Always follow basic safety precautions when installing or using this product to reduce the risk of fire, electric shock, or injury to persons.
- Installation must be performed by a qualified professional or licensed plumber.
- Ensure the main water supply is turned off before installation.
- Wear appropriate personal protective equipment (PPE) during installation, including safety glasses and gloves.
- Verify all connections are secure and leak-free before restoring water supply.
- This product is designed for use with standard 1/2" U.S. plumbing connections.
- The pressure balance valve helps protect against scalding from sudden changes in water pressure.
Image 2.1: Emphasizing the importance of shower safety and quality construction.
3. Package Contents
Carefully unpack all components and check against the list below. Ensure all parts are present and undamaged before proceeding with installation.
Image 3.1: An exploded view showing all components included in the package.
- 10 Inch Rain Shower Head
- 16 Inch Wall Mounted Shower Arm
- Brass Handheld Shower Head
- Shower Bracket Holder
- Shower Mixer Valve with Trims
- 71 Inch Shower Hose
- Installation Manual
- Mounting Hardware and Accessories
4. Installation
This section provides a general overview of the installation process. Refer to the detailed installation manual included in your package for specific diagrams and step-by-step instructions.
4.1 Pre-Installation Checklist
- Confirm all package contents are present.
- Ensure plumbing connections are standard 1/2" U.S. connections.
- Turn off the main water supply.
- Gather necessary tools (e.g., wrench, screwdriver, sealant tape).
4.2 Mixer Valve Installation
The mixer valve is the core component for controlling water flow and temperature. It should be installed within the wall, ensuring proper depth relative to the finished tile surface.
Image 4.1: The shower mixer valve and its trim components.
4.3 Shower Head and Arm Installation
The 10-inch rain shower head and 16-inch wall-mounted arm provide a wide coverage area for a comfortable showering experience.
Image 4.2: The 10-inch rain shower head and its wall-mounted arm.
4.4 Handheld Shower and Hose Installation
The brass handheld shower head and 71-inch hose offer flexibility for targeted rinsing and cleaning.
Image 4.3: The handheld shower head, hose, and bracket.
4.5 Installation Video Guide
Video 4.1: An overview of the SR SUN RISE shower system, demonstrating its features and components. Note: This video features an Oil Rubbed Bronze finish, but the installation and functionality are similar to the Polished Chrome model.
5. Operation
The SRSH-F5043 shower system features a single handle for controlling water flow and temperature, and a diverter knob to switch between the rain shower head and the handheld shower.
5.1 Water Flow and Temperature Control
- To turn on the water, lift the main handle.
- Rotate the handle left for hot water and right for cold water.
- Adjust the handle's position to achieve the desired water temperature and flow intensity.
Image 5.1: Illustration of the hot and cold water temperature control mechanism.
5.2 Shower Outlet Selection
- Rotate the diverter knob (typically located above the main handle) to switch between the rain shower head and the handheld shower.
- Ensure the diverter knob is fully engaged in the desired position for optimal water flow.
Video 5.1: A demonstration of the shower system in use, highlighting the water flow and functionality of both the rain shower head and handheld shower.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your SR SUN RISE shower system.
6.1 Cleaning the Finish
- Clean the polished chrome finish with a soft, damp cloth and mild soap.
- Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
6.2 Cleaning Silicone Nozzles
The silicone nozzles on the rain shower head and handheld shower are designed for easy cleaning to prevent mineral buildup.
- Simply rub your finger across the silicone nozzles to dislodge any mineral deposits.
- For stubborn buildup, a solution of equal parts white vinegar and water can be used. Apply, let sit for a few minutes, then rub and rinse.
Image 6.1: The check valve feature helps prevent dripping and ensures efficient water flow.
7. Troubleshooting
If you encounter any issues with your shower system, refer to the following common problems and solutions. For persistent issues, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Clogged nozzles; partially closed shut-off valves; low household water pressure. | Clean shower head nozzles; ensure shut-off valves are fully open; consult a plumber for household water pressure issues. |
| Water Leaks | Loose connections; worn O-rings/washers; damaged components. | Tighten connections; replace O-rings/washers; inspect for damage and replace parts if necessary. |
| Inconsistent Water Temperature | Improperly installed or faulty pressure balance valve cartridge. | Verify correct installation of the pressure balance valve; replace the cartridge if faulty. |
| Water Hammer Noise | Sudden changes in water flow; air in pipes. | The pressure balance valve has built-in check valves to minimize this. If persistent, consult a plumber. |
8. Specifications
Detailed technical specifications for the SR SUN RISE SRSH-F5043 shower system.
- Brand: SR SUN RISE
- Model Number: SRSH-F5043
- Color: Polished Chrome
- Material: Brass (valve), 304 Stainless Steel (rain shower head), Metal (handle)
- Finish Type: Chrome
- Number of Handles: 1
- Mounting Type: Wall Mount
- Rain Shower Head Size: 10 Inch (25x25cm)
- Shower Arm Length: 16 Inch
- Shower Hose Length: 71 Inch
- Flow Rate: 1.75 Gallons Per Minute
- Item Weight: 11.5 Pounds
- Product Dimensions: 5 x 13 x 19 inches
- Certifications: cUPC Certified, ASME A112.18.1-2018/CSA B125.1-18 Compliant, Approved by California Energy Commission
Image 8.1: Documentation showing cUPC certification and approval by the California Energy Commission.
9. Warranty & Support
SR SUN RISE is committed to providing high-quality products and excellent customer service. Your SRSH-F5043 shower system comes with a warranty to ensure your satisfaction.
- Warranty: Please refer to the warranty information provided in your product packaging or contact SR SUN RISE customer service for details.
- Customer Support: If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact us. We are here to help.
Contact Information:
- USA: mikechen@eyakult.com
- Canada: zhongly@eyakult.com
