DonJoy DJ141WW04-XS-L

DonJoy ComfortFORM Wrist Support Brace Instruction Manual

Model: DJ141WW04-XS-L

1. Product Overview

The DonJoy ComfortFORM Wrist Support Brace is designed to provide support for individuals experiencing wrist sprains, strains, and Carpal Tunnel Syndrome (CTS). Its construction emphasizes durability and a lightweight feel, making it suitable for daily activities and low-impact use. The brace incorporates a removable contoured aluminum palmar stay to restrict wrist flexion and features adjustable Velcro strapping for a secure and anatomically correct fit.

DonJoy ComfortFORM Wrist Support Brace, front view

Figure 1: Front view of the DonJoy ComfortFORM Wrist Support Brace.

Key Features:

  • Provides support for wrist sprains, strains, and Carpal Tunnel Syndrome (CTS).
  • Durable and lightweight design for comfort during daily and low-impact activities.
  • Features a removable contoured aluminum palmar stay to control wrist flexion.
  • Adjustable Velcro strapping ensures a customized and secure fit.

2. Sizing and Hand Orientation

To ensure optimal support and comfort, it is crucial to select the correct size and hand orientation for your DonJoy ComfortFORM Wrist Support Brace. Measure your wrist circumference accurately before choosing a size.

2.1. Measuring Your Wrist

  1. Use a flexible measuring tape.
  2. Wrap the tape around the smallest part of your wrist, just above your hand.
  3. Note the measurement in inches.

2.2. Size Chart

SizeWrist Circumference
X-SmallUnder 5.5"
Small5.5" - 6.5"
Medium6.5" - 7.5"
Large7.5" - 8.5"
X-Large8.5"+

Ensure you select the brace designed for either the Left Hand or Right Hand as appropriate for your needs.

3. Application Instructions

Follow these steps to correctly apply your DonJoy ComfortFORM Wrist Support Brace for effective support.

  1. Prepare the Brace: Unfasten all Velcro straps on the brace.
  2. Position the Hand: Slide your hand into the brace, ensuring your thumb passes through the thumb hole (if present) and the contoured aluminum palmar stay is positioned along the palm side of your wrist and forearm.
  3. Person wearing DonJoy ComfortFORM Wrist Support Brace, side view

    Figure 2: Proper positioning of the brace on the wrist and forearm.

  4. Secure Straps: Begin by securing the middle strap, then proceed to the strap closest to your hand, and finally the strap closest to your forearm. Adjust each strap to achieve a snug, yet comfortable fit. The brace should feel supportive without restricting circulation or causing discomfort.
  5. Person wearing DonJoy ComfortFORM Wrist Support Brace, top view

    Figure 3: Top view of the brace showing strap placement.

  6. Check Fit: Your wrist should be held in a neutral or slightly extended position. Ensure the brace does not pinch or rub against your skin. You should be able to move your fingers freely.

3.1. Removable Palmar Stay

The brace includes a removable contoured aluminum palmar stay. This stay is designed to provide rigid support and control wrist flexion. It can be removed for cleaning or if a less rigid support is desired, though its primary function is to enhance stability.

DonJoy ComfortFORM Wrist Support Brace, interior view showing palmar stay pocket

Figure 4: Interior view of the brace, highlighting the pocket for the removable palmar stay.

4. Care and Maintenance

Proper care extends the life of your DonJoy ComfortFORM Wrist Support Brace and maintains its effectiveness.

  • Cleaning: Hand wash the brace in cold water with mild soap. Remove the aluminum palmar stay before washing if possible.
  • Drying: Air dry thoroughly. Do not machine wash, tumble dry, iron, or bleach the brace. Avoid direct heat.
  • Storage: Store in a clean, dry place away from direct sunlight when not in use.
  • Inspection: Regularly inspect the brace for signs of wear, such as frayed straps or damaged stitching. Replace if significant wear is observed to ensure continued support.

5. Troubleshooting

If you encounter issues with your wrist brace, consider the following common solutions:

  • Brace feels too loose or too tight: Re-adjust the Velcro straps. Ensure the brace is snug but not constricting. If the issue persists, verify you are using the correct size according to the sizing chart.
  • Discomfort or skin irritation: Ensure the brace is not applied too tightly. Check for any folds or creases in the material that might be causing pressure points. If irritation continues, discontinue use and consult a healthcare professional.
  • Straps are too long: The Velcro straps are designed to be adjustable. If excess strap material interferes with comfort or function, it can be carefully trimmed with scissors after achieving the desired fit. Ensure enough strap remains for secure fastening.
  • Palmar stay shifts or causes discomfort: Ensure the palmar stay is correctly seated within its pocket. If it feels misaligned, remove and reinsert it. If discomfort persists, consult a healthcare professional.

6. Product Specifications

BrandDonJoy
Model NumberDJ141WW04-XS-L
MaterialNylon-Mesh
Specific UsesCarpal Tunnel Syndrome, Sprains, Strains
Target Body PartHand, Wrist
Closure TypeHook & Loop (Velcro)
Special FeaturesLightweight, Removable Contoured Aluminum Palmar Stay
Hand OrientationAvailable for Left Hand and Right Hand

7. Warranty and Support

Information regarding specific warranty terms for the DonJoy ComfortFORM Wrist Support Brace was not available in the provided product data. For detailed warranty information or product support, please contact DonJoy customer service directly or refer to the official DonJoy website.

Manufacturer: DJO Global

For further assistance, please visit the DonJoy Store on Amazon or the official DonJoy website.

© 2023 DonJoy. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.