DiversiTech 6-2626L A/C Secondary Plastic Condensate Drain Pan

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your DiversiTech 6-2626L A/C Secondary Plastic Condensate Drain Pan. This product is designed to collect condensate from cooling and evaporator coils, preventing water damage from overflow in HVAC systems. Please read these instructions thoroughly before installation and use to ensure safe and efficient operation.

Image 1: DiversiTech 6-2626L A/C Secondary Plastic Condensate Drain Pan.

2. Safety Information

Always observe basic safety precautions when installing or servicing HVAC equipment. Failure to follow these instructions could result in property damage or personal injury.

• Ensure the installation area is clear of debris and obstructions.
• Wear appropriate personal protective equipment (PPE) such as gloves and eye protection.
• Consult a qualified HVAC technician if you are unsure about any installation steps.
• Do not modify the drain pan or its components. Use only original parts.
• Ensure proper drainage is established to prevent water accumulation and potential hazards.

3. Product Overview

The DiversiTech 6-2626L Condensate Drain Pan is constructed from durable ABS plastic, designed for longevity and resistance to corrosion. Key features include:

• Seamless Design: Crafted without seams to prevent leaks and rust.
• Durable Construction: Vacuum-formed from non-toxic ABS plastic with rolled edges, reinforced corners, and a ribbed bottom for strength and rigidity.
• Integrated PVC Fitting: Includes a 3/4" diameter PVC discharge fitting for easy connection to a drain line.
• Dimensions: Measures 26" x 26" inches with a 2" (50.8mm) water depth capacity.

Image 2: Detail of the drain pan's construction, highlighting the ribbed bottom.

4. Specifications

5. Setup and Installation

Follow these steps for proper installation of the condensate drain pan:

1. Placement: Position the drain pan directly underneath the cooling or evaporator coil unit. Ensure the pan is level and fully supports the unit to effectively catch any overflow.
2. Drain Line Connection: The pan comes with a 3/4" PVC discharge fitting. Connect a suitable PVC drain line to this fitting. Ensure the connection is secure and watertight to prevent leaks.
3. Slope for Drainage: Ensure the drain line has a continuous downward slope to allow gravity to carry condensate away efficiently. Avoid sags or traps in the line that could impede flow.
4. Discharge Point: Route the drain line to an appropriate discharge point, such as a floor drain, utility sink, or outdoors, in accordance with local plumbing codes. Ensure the discharge point is not susceptible to freezing.
5. Testing: After installation, pour a small amount of water into the pan to verify that it drains correctly through the connected line without any leaks or blockages.

Image 3: Example of PVC fitting connection on the drain pan.

6. Operation

The DiversiTech 6-2626L Secondary Condensate Drain Pan operates passively. Its primary function is to serve as a backup collection system for condensate water that may overflow from the primary HVAC equipment drain pan. When condensate water accumulates in the secondary pan, it will flow through the connected drain line to the designated discharge point, preventing water damage to the surrounding area.

7. Maintenance

Regular maintenance ensures the continued effectiveness of your condensate drain pan:

• Periodic Inspection: Inspect the drain pan and drain line at least once every six months, or more frequently during peak cooling seasons. Check for any signs of water accumulation, cracks, or blockages.
• Cleaning: If debris or algae build-up is observed, disconnect the drain line and clean the pan thoroughly with a mild detergent and water. Rinse completely.
• Drain Line Check: Ensure the drain line remains clear and free-flowing. If blockages occur, clear them using appropriate methods (e.g., a wet/dry vacuum or a drain snake).
• Re-testing: After cleaning or maintenance, pour water into the pan to confirm proper drainage.

8. Troubleshooting

Here are solutions for common issues:

• Water Accumulation in Pan:
  • Cause: Clogged drain line or improper slope.
  • Solution: Inspect the drain line for blockages and clear them. Ensure the drain line has a continuous downward slope.
• Leaks Around Fitting:
  • Cause: Loose or improperly sealed PVC fitting.
  • Solution: Tighten the PVC fitting connection. Apply PVC primer and cement if necessary to ensure a watertight seal.
• Pan Overflowing:
  • Cause: Primary HVAC drain pan is severely overflowing, or the secondary drain line is completely blocked.
  • Solution: Address the issue with the primary HVAC unit's drainage. Clear any blockages in the secondary drain line.

9. Warranty and Support

For warranty information or technical support regarding your DiversiTech 6-2626L A/C Secondary Plastic Condensate Drain Pan, please contact DiversiTech Corporation directly. Refer to the official DiversiTech website or product packaging for the most current contact details and warranty terms.

Manufacturer: DiversiTech Corporation
Website: www.diversitech.com