HUMAX H40D
Humax H40D Flat Satellite Antenna User Manual
Model: H40D
Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Humax H40D Flat Satellite Antenna. Please read this manual carefully before using the product to ensure proper setup and optimal performance.
Package Contents
- Flat Satellite Antenna
- Combined Wall and Mast Mount Bracket
- User Manual (D, GB, F, IT)
- Compass
- Mounting Wrench
Image: Contents of the Humax H40D Flat Satellite Antenna package, including the antenna, mounting hardware, compass, and wrench.
Product Overview
The Humax H40D is a compact flat satellite antenna designed for receiving common satellites such as Astra, Eutelsat (including Hotbird), and Sirius. Its reception power is comparable to a 60 cm offset antenna, making it suitable for various applications, including mobile use.
Image: Front view of the white Humax H40D Flat Satellite Antenna, showing its sleek, compact design.
Image: Rear view of the Humax H40D Flat Satellite Antenna, highlighting the mounting points and LNB housing.
Key Features
- Compact and space-saving design.
- Dual polarization support.
- Reception power equivalent to a 60 cm offset antenna.
- Suitable for mobile applications.
- Easy and quick installation.
- Waterproof construction.
Setup and Installation
The Humax H40D antenna can be installed in minutes. The provided mounting material allows for secure and discreet installation options, including wall and mast mounting.
1. Choosing an Installation Location
Select a location with a clear line of sight to the desired satellite. Obstacles such as trees or buildings can significantly affect reception. As a general rule, obstacles should not be higher than half the distance between the obstacle and the antenna.
Image: The Humax H40D antenna mounted discreetly on a balcony wall, demonstrating its compact size and aesthetic integration.
2. Mounting Options
The antenna comes with a combined wall and mast mount bracket. Ensure the mounting surface is stable and capable of supporting the antenna's weight.
- Wall Mounting: Use the provided screws and anchors to secure the bracket to a solid wall.
- Mast Mounting: Attach the bracket to a mast using the supplied clamps.
Image: A person drilling into a brick wall, illustrating the initial step of wall mounting the antenna.
3. Connecting the LNB
Connect the coaxial cable from your satellite receiver to the LNB (Low Noise Block) output on the antenna. Ensure the connection is secure and waterproof.
Operating Instructions
1. Satellite Alignment
After physical installation, the antenna requires precise alignment to receive satellite signals. This process involves adjusting the antenna's azimuth (horizontal angle) and elevation (vertical angle).
- Use the provided compass to determine the approximate direction of the desired satellite (e.g., Astra 19.2°E, Hotbird 13°E).
- Connect the antenna to your satellite receiver and TV. Access the signal strength/quality meter on your receiver.
- Slowly adjust the antenna horizontally and vertically until maximum signal strength and quality are achieved. Fine-tuning is crucial for optimal reception, especially in adverse weather conditions.
Image: A family watching television, with the Humax H40D antenna in the foreground, illustrating its capability to provide high-quality satellite reception.
2. Mobile Use
Due to its compact size, the H40D is also suitable for mobile use, such as with RVs or caravans. Ensure the antenna is securely mounted and re-aligned at each new location.
Image: The Humax H40D antenna mounted on top of an RV, demonstrating its portability and suitability for mobile satellite reception.
Maintenance
The Humax H40D antenna is designed for durability and requires minimal maintenance.
- Cleaning: Periodically clean the antenna surface with a soft, damp cloth to remove dirt, dust, or debris that might accumulate and affect signal reception. Do not use abrasive cleaners.
- Inspection: Regularly check all mounting points and cable connections for security and signs of wear or corrosion. Tighten any loose screws.
- Obstruction Check: Ensure no new obstacles (e.g., growing trees, new constructions) are blocking the line of sight to the satellite.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Signal / Weak Signal |
|
|
| Picture Freezing / Pixelation |
|
|
| No Power to LNB |
|
|
Technical Specifications
| Feature | Specification |
|---|---|
| Frequency Range | 10.7 - 12.75 GHz |
| Gain | 33 dBi (at 12.7 GHz) |
| LNB Type | Single (for one participant) |
| Operating Temperature | -30 °C to +60 °C |
| Waterproof | Yes |
| Mounting Options | Wall mount, Mast mount |
| Dimensions (W x H x D) | 527 x 330 x 69 mm (approx. 52.7 x 33 x 6.9 cm) |
| Color | White |
| Model Number | H40D |
Image: A diagram illustrating the dimensions of the Humax H40D antenna, showing its width, height, and depth.
Warranty and Support
Warranty Information
Please refer to the warranty card included with your product for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.
Customer Support
For technical assistance, troubleshooting, or product inquiries, please contact Humax customer support. Contact details can typically be found on the official Humax website or in the product packaging.
Manufacturer: Sky Vision Satellitentechnik GmbH
Related documentsH40D
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.