1. Introduction
The Paulmann MaxLED 500 LED Strip Basic Kit is designed for versatile interior lighting. These powerful LED strips can be used as primary lighting or for accentuation, particularly effective when integrated into profiles. The warm white light (2700K) provides a pleasant and relaxing ambiance.
This basic kit includes a 5-meter LED strip and a compatible electronic power supply. The system is expandable with additional strips, connectors, and control units, including remote controls. Always observe the maximum specified length during planning.
Image showing the Paulmann MaxLED 500 Basic Set 5m packaging and its main components: the 5-meter LED strip, power supply, and connection cable. The packaging highlights key features like 2750 lumens, 30W, 230/24V, 2700K warm white light, and dimmable functionality.
2. Safety Instructions
Please read these safety instructions carefully before installation and use. Keep this manual for future reference.
- Electrical Safety: Ensure the power supply is disconnected before installation or maintenance. Only use the provided power supply unit. Do not modify the product.
- Indoor Use Only: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is strictly for indoor use.
- Temperature: Do not expose the LED strip to extreme temperatures or direct sunlight.
- Ventilation: Ensure adequate ventilation around the power supply unit to prevent overheating.
- Light Source: This product is a containing product. Containing products are luminaires that can be disassembled to separately check the light source(s) contained within. This product contains a light source of energy efficiency class G.
- Damage: Do not use the product if any part is damaged. Contact customer service for replacement parts.
3. Package Contents
Verify that all components are present in the package:
- 1x MaxLED 500 LED Strip (5 meters)
- 1x Electronic Power Supply Unit
- Connection cables
Diagram illustrating the package contents: one 5-meter LED strip (3mm thick, 12.5mm wide, 34W, 60VA), and the power supply unit with cables. It also shows the strip is cuttable every 83mm and indicates a 5-year warranty.
4. Setup and Installation
Follow these steps for proper installation of your MaxLED 500 LED strip:
- Prepare the Surface: Ensure the mounting surface is clean, dry, smooth, and free of dust or grease. This is crucial for the adhesive backing to bond effectively.
- Measure and Cut (Optional): The LED strip can be shortened to your desired length. Identify the designated cutting marks, which occur approximately every 8.3 cm (83 mm). Use sharp scissors to cut precisely along these marks. Do not cut elsewhere on the strip.
- Connect Strip Segments (Optional): If you have cut the strip or wish to extend it, use compatible connectors (sold separately) to join segments. Ensure the pins align correctly for a secure electrical connection.
A collage of four images detailing the features of the MaxLED 500 LED strip. Top left shows the self-adhesive backing, top right shows 72 LEDs per meter, bottom left shows the strip being cut at 8.3 cm intervals, and bottom right shows two strip segments being connected.
Close-up image of hands connecting two segments of the LED strip using a connector, demonstrating the simple plug-and-play connection system.
- Apply the Strip: Carefully peel off the protective film from the self-adhesive backing. Press the LED strip firmly onto the prepared surface, ensuring even contact along its entire length.
- Connect to Power Supply: Connect the LED strip to the output cable of the electronic power supply unit. Ensure the connection is secure and correctly oriented.
- Power On: Plug the power supply unit into a standard electrical outlet. The LED strip should illuminate.
An image illustrating the Paulmann MaxLED 500 LED strip installed as under-cabinet lighting in a modern kitchen, providing optimal task lighting and strong accents. The text overlay indicates it's suitable for profiles and furniture, and is an expandable component system.
5. Operation
Once installed and powered, the MaxLED 500 LED strip provides warm white light. The system is designed to be dimmable, allowing you to adjust the light intensity to suit your needs. If you have purchased an optional control unit, you can operate the dimming function and switch the lights on/off via a remote switch.
An image showing the MaxLED 500 LED strip installed under kitchen cabinets, illuminating the countertop. Insets highlight 'Easy to connect', 'Easy to mount', and 'Easy to control' features, with a remote control shown.
6. Maintenance
The MaxLED 500 LED strip requires minimal maintenance.
- Cleaning: Disconnect the product from the power supply before cleaning. Use a dry, soft cloth to gently wipe the LED strip and power supply unit. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the product.
- Inspection: Periodically check the connections and the strip for any signs of wear or damage.
7. Troubleshooting
If you encounter issues with your MaxLED 500 LED strip, refer to the following common problems and solutions:
- No Light:
- Ensure the power supply is securely plugged into a working electrical outlet.
- Verify that the LED strip is correctly connected to the power supply unit.
- Check if the power outlet is functional by plugging in another device.
- Flickering Lights:
- Check all connections between the strip and the power supply for looseness.
- Ensure the power supply is not overloaded (if additional strips have been added).
- Uneven Brightness:
- Ensure the LED strip is adhered to a flat, even surface.
- Check for any kinks or damage to the strip that might affect light distribution.
If these steps do not resolve the issue, please contact Paulmann customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | Paulmann |
| Model Number | 70604 |
| Product Dimensions (L x W x H) | 500 x 12.5 x 0.3 cm |
| Weight | 450 g |
| IP Rating | IP20 (Indoor Use Only) |
| Style | Modern |
| Color (Strip) | Silver |
| Max Watts | 30 Watts |
| Voltage | 24 Volts |
| Special Features | Dimmable |
| Plug Type | AC/DC |
| Bulb Type | LED |
| Luminous Flux | 2750 lm |
| Color Temperature | 2700 Kelvin (Warm White) |
| Color Rendering Index (CRI) | 80 |
| Average Lifespan | 30000 Hours |
| Cuttable Intervals | Every 8.3 cm (83 mm) |
| Max Expandable Length | 16.5 meters (with additional components) |
Technical diagram showing the dimensions of the power supply unit (180x52x30mm) and the LED strip, including cable lengths (1.5m input, 1m output) and the maximum expandable length of 16.5m.
9. Warranty and Support
This Paulmann MaxLED 500 LED Strip Basic Kit comes with a 5-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or to purchase additional components, please visit the official Paulmann website or contact their customer service department. Refer to the Paulmann website for the most up-to-date contact information.
