1. Product Overview
The Maxima SC1 High Gloss Coating is a specialized clear coat formulated for the powersports industry. It is designed to coat plastic, fiberglass, and painted surfaces, enhancing their appearance with a high-gloss finish. This product also aids in easier cleanup by preventing mud and dirt from adhering to surfaces, particularly on motorcycle and ATV fenders. It is water-resistant and leaves a dry, long-lasting luster.
Key features include:
- High gloss clear coat for powersports surfaces.
- Suitable for plastic, fiberglass, and painted surfaces.
- Facilitates easier cleanup by preventing dirt adhesion.
- Water-resistant formula.
- Leaves a dry, long-lasting luster and shine.
- Features a fresh, clean scent.
Figure 1: Maxima SC1 High Gloss Coating (2-Pack)
2. Safety Information
CAUTION: Flammable. Do not spray near open flame.
Always use in a well-ventilated area. Avoid contact with eyes and skin. In case of contact, rinse thoroughly with water. If swallowed, seek immediate medical attention. Keep out of reach of children and pets.
3. Setup and Surface Preparation
Before applying Maxima SC1 High Gloss Coating, ensure the surface is clean, dry, and free from dirt, dust, grease, and other contaminants. For optimal results, wash the vehicle thoroughly and allow it to dry completely.
- Wash the surface using an appropriate cleaning agent.
- Rinse thoroughly with water to remove all soap residue.
- Allow the surface to air dry completely or use a clean microfiber towel to dry.
- Ensure the area is well-ventilated before proceeding with application.
4. Operating Instructions
Follow these steps for effective application of Maxima SC1 High Gloss Coating:
- Shake the can well before use to ensure proper mixing of contents.
- Hold the can approximately 6 to 8 inches from the surface.
- Apply a light, even coat over the desired plastic, fiberglass, or painted surfaces. Avoid over-application.
- Allow the coating to set for a few moments.
- Using a clean, soft microfiber cloth, gently buff the surface to achieve a high-gloss, mirror-like finish.
- For hard-to-reach areas, spray the product onto a microfiber cloth first, then wipe onto the surface.
- Avoid spraying on areas where grip is essential, such as handlebars, tires, or seats, as the product can make surfaces slippery. If accidental contact occurs, wipe off immediately.
Video 1: Demonstration of Maxima SC1 High Gloss Coating application on a vehicle. This video shows the product being sprayed and wiped to achieve a glossy finish on various parts of a powersports vehicle.
Video 2: Advanced Kotings Shine Coating application. This video illustrates how a similar shine coating product is applied to restore shine and make cleanup easier on vehicle surfaces.
5. Maintenance of Coated Surfaces
The Maxima SC1 coating helps prevent mud and dirt from adhering, making subsequent cleanups easier. To maintain the high-gloss finish and protective properties:
- After use, simply rinse the coated surfaces with water to remove loose dirt and mud.
- For stubborn grime, use a mild soap and water solution, then rinse and dry.
- Reapply Maxima SC1 as needed to refresh the shine and maintain protection, especially after thorough cleaning or exposure to harsh elements.
Video 3: Maxima Racing Oils video demonstrating how the SC1 coating helps in battling dirt and winning the clean, highlighting its protective qualities.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Uneven or streaky finish | Too much product applied, or not buffed evenly. | Apply a lighter coat next time. Buff immediately and thoroughly with a clean microfiber cloth. |
| Surface remains dull | Surface not thoroughly cleaned before application, or insufficient product. | Ensure surface is completely clean and dry. Apply another light, even coat and buff. |
| Slippery surfaces after application | Product applied to areas requiring grip. | Immediately wipe off any excess product from handlebars, tires, or seats with a clean cloth. |
7. Product Specifications
| Attribute | Detail |
|---|---|
| Brand | Maxima |
| Model Number | 78920-2PK |
| Item Weight | 0.01 ounces (per can, approximate) |
| Product Dimensions | 9.5 x 2.5 x 5 inches (for 2-pack) |
| Volume | 34.4 FL. OZ. (1016 mL) total for 2-pack |
| Net Weight | 24 OZ. (680g) total for 2-pack |
| Formulation | High gloss clear coat, water resistant |
| Scent | Fresh Clean Scent |
8. Warranty and Support
For specific warranty information or product support, please refer to the manufacturer's official website or contact Maxima customer service directly. Contact details may be available on the product packaging or through the official Maxima Racing Oils store on Amazon: Visit the Maxima Store.
