Beautyrest BR54-0530

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Beautyrest Heated Electric Blanket Instruction Manual

Model: BR54-0530

1. Introduction and Overview

This manual provides essential information for the safe and effective use of your Beautyrest Heated Electric Blanket. This oversized throw blanket (60 in x 70 in) features Secure Comfort heated technology, designed to adjust temperature based on overall, spot, and ambient room temperatures for consistent warmth. It is constructed from ultra-soft microlight plush fabric and is designed to emit virtually no EMF emissions.

Woman relaxing on a couch covered with a brown Beautyrest heated electric blanket.

Image: A woman comfortably wrapped in the Beautyrest heated electric blanket on a sofa.

The blanket offers 3 heat settings and includes a 2-hour auto shut-off feature for safety and convenience. It is UL certified and independently tested to meet high safety standards.

Icons representing soft and cozy, virtually zero EMF, fast heating, and machine washable features.

Image: Visual representation of key features: soft and cozy fabric, virtually zero EMF, fast heating capability, and machine washable design.

2. Setup Instructions

  1. Unpack: Carefully remove the heated blanket and controller from its packaging.
  2. Placement: Lay the blanket flat on a bed or sofa. Ensure it is not bunched, pinched, or tucked under heavy objects, as this can affect heating performance and safety. Avoid using on movable furniture like rocking chairs or recliners.
  3. Connect Controller: Securely plug the controller cord into the blanket's connector. Ensure a firm connection.
  4. Power Connection: Plug the power cord into a standard 110V-120V AC electrical outlet.
Close-up of the blanket's controller showing 3 heat levels, 2-hour auto shut-off, heavy-duty insulated cord, 2-prong plug, and power specifications.

Image: Detailed view of the controller, highlighting its features and power requirements.

3. Operating Instructions

Your Beautyrest Heated Electric Blanket is designed for ease of use with its intuitive controller.

  1. Power On/Off: Press the 'ON/OFF' button on the controller to turn the blanket on or off.
  2. Adjust Heat Settings: Use the 'HIGH', 'MED', and 'LOW' buttons to cycle through the 3 available heat settings. Select the desired warmth level.
  3. Auto Shut-Off: The blanket features a built-in 2-hour auto shut-off for safety. After 2 hours of continuous operation, the blanket will automatically turn off. To restart, simply press the 'ON/OFF' button again.

Video: A demonstration of the Beautyrest heated throw blanket, showcasing its features and controller operation.

4. Maintenance

Proper care ensures the longevity and performance of your heated blanket. Always follow these instructions:

  1. Disconnect Power: Before cleaning, always unplug the controller from the blanket and the power cord from the wall outlet.
  2. Machine Wash: Wash by hand or use a delicate cycle in cold water with minimal detergent.
  3. Rinse: Rinse thoroughly in cold water.
  4. Remove Promptly: Remove the blanket immediately after the spin cycle to prevent creasing.
  5. Tumble Dry: Tumble dry on medium or low heat for no more than 5 minutes.
  6. Air Dry: Gently stretch the blanket and hang it to finish drying. Do not hang with clothespins.
  7. Do Not Iron: Never iron the heated blanket.
Infographic showing step-by-step instructions for washing and drying the heated blanket, including warnings against clothespins and ironing.

Image: Visual guide for washing and drying the heated blanket, emphasizing key steps and precautions.

5. Troubleshooting

If you encounter any issues with your heated blanket, please refer to the following common solutions:

  • Q: Why is my light blinking?
    A: Unplug and reconnect the controller, ensuring it is properly connected. If the issue persists, contact customer support.
  • Q: Why does my blanket not heat well?
    A: Ensure the blanket is powered on and set to the maximum level. Allow sufficient time for it to heat up.
  • Q: Only parts of my blanket are getting warm.
    A: This is usually caused by a bunched or pinched heating element. Lay the blanket flat, untucked, and free from heavy objects. Straighten the heating wires as needed to restore function. Lay the blanket flat and run your fingers along the wire, paying special attention to the top and bottom of the blanket where the wire bends. If any portion of the wire is twisted on itself, manually twist it back.
Frequently Asked Questions section with solutions for blinking lights, poor heating, and uneven heating.

Image: Common troubleshooting questions and their solutions for the heated blanket.

6. Specifications

Model NamePlush Electric Blanket Throw For Cold Weather
Model NumberBR54-0530
UPC675716640095
SizeThrow (60 in x 70 in)
Material100% Microlight Plush (Polyester)
Heat Settings3
Auto Shut-Off2 Hours
EMF EmissionsVirtually Zero EMF
Power Cord Length6 ft
Controller Cord Length3 ft
Voltage110V - 120V @ 60Hz (Max 160W)
CertificationsUL Certified
Diagram showing the dimensions of the throw blanket: 60 inches wide by 70 inches long.

Image: Diagram illustrating the dimensions of the throw blanket.

7. Warranty and Support

Your Beautyrest Heated Electric Blanket is backed by a 5-year warranty, ensuring peace of mind regarding its quality and performance. The product is UL certified and has undergone independent testing to meet the highest safety standards.

For any questions, concerns, or warranty claims, please refer to the contact information provided with your product packaging or visit the official Beautyrest website for customer support details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.