Introduction
This manual provides instructions for the safe and efficient use of the uxcell R260 DC Micro Motor. Please read this manual thoroughly before installation and operation to ensure proper function and longevity of the product.
Safety Information
Adhere to the following safety guidelines to prevent injury or damage to the motor and connected equipment:
- Ensure the power supply voltage matches the motor's requirements (DC 3V-12V).
- Disconnect power before performing any installation, maintenance, or troubleshooting.
- Avoid exposing the motor to excessive moisture, dust, or extreme temperatures.
- Do not attempt to disassemble the motor beyond what is explicitly described in this manual.
- Keep the motor and associated components out of reach of children.
- Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Handle with care and wash hands after contact.
Product Overview
The uxcell R260 is a compact DC micro motor designed for various applications requiring high-speed rotation, such as in hair dryers, dust cleaners, electrical tools, and massage machines.
Features
- Wide operating voltage range: DC 3V-12V
- High rotational speed: Up to 20000 RPM
- Compact design with a 2mm diameter shaft
- Durable construction using metal and plastic materials
Components
The motor features a cylindrical metal body, a plastic end cap with two terminal connectors for power input, and a protruding metal shaft for connecting to external components.
Image: The uxcell R260 DC Micro Motor, illustrating its cylindrical metal casing, the plastic end with two electrical terminals, and the output shaft.
Specifications
| Feature | Detail |
|---|---|
| Model | R260 |
| Operating Voltage | DC 3V-12V |
| Speed | 20000 RPM |
| Main Body Size (L x D) | 27 x 24mm (1.1" x 0.9") |
| Shaft Size (D x L) | 2 x 7mm (0.08" x 0.28") |
| Material | Metal, Plastic |
| Net Weight | 31g |
| Country of Manufacture | CHINA |
| UPC | 712662160274 |
Note: Specifications are approximate and may vary slightly.
Setup and Installation
Follow these steps for proper installation of your micro motor:
- Prepare the Mounting Area: Ensure the surface where the motor will be installed is clean, dry, and stable. The motor should be securely housed or mounted to prevent movement during operation.
- Connect Power: Connect the two terminal connectors of the motor to your DC power supply. The motor's rotation direction can be reversed by swapping the polarity of the connections. Ensure connections are firm and insulated.
- Secure the Motor: Mount the motor securely within your application's housing or frame. Verify that the motor shaft is free to rotate without any obstructions or friction.
- Test Connection: Briefly apply the specified voltage (DC 3V-12V) to confirm proper operation and rotation. Observe for any unusual noises or vibrations.
Caution: Do not exceed the maximum recommended voltage of 12V DC to prevent potential damage to the motor.
Operation
Once properly installed and connected to a suitable DC power source, the uxcell R260 motor will begin to rotate when power is applied.
- Voltage Control: The motor's speed is directly proportional to the applied voltage within its operating range (3V-12V DC). A lower voltage will result in a lower speed, while a higher voltage will increase the speed.
- Direction of Rotation: The direction of rotation can be reversed by changing the polarity of the DC power supply connected to the motor terminals.
- Load Management: Avoid applying excessive mechanical load that could stall the motor. Stalling can lead to overheating and potential damage to the motor windings.
Maintenance
The uxcell R260 DC Micro Motor is designed for low maintenance. Regular care will help ensure its optimal performance.
- Cleaning: Keep the motor free from dust, dirt, and debris. Use a soft, dry cloth to gently wipe the exterior. Do not use liquids, solvents, or abrasive cleaners.
- Inspection: Periodically inspect the motor for any visible signs of wear, loose electrical connections, or unusual noises or vibrations during operation.
- Lubrication: This motor is typically sealed and does not require user lubrication. Attempting to lubric lubricate may void any implied warranty and could introduce contaminants.
Troubleshooting
If you encounter issues with your uxcell R260 micro motor, refer to the following table for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not run | No power supply | Check power connections and ensure the power source is active. |
| Incorrect voltage | Verify that the applied voltage is within the DC 3V-12V range. | |
| Loose wiring | Secure all electrical connections to the motor terminals. | |
| Motor runs slowly or weakly | Low voltage | Increase the voltage within the specified operating range. |
| Excessive load | Reduce the mechanical load applied to the motor shaft. | |
| Motor overheats | Excessive load or prolonged operation | Reduce the load, or allow for cooling periods during extended use. |
| Insufficient ventilation | Ensure adequate airflow around the motor, especially if enclosed. |
Warranty and Support
For warranty information, technical assistance, or to inquire about replacement parts, please contact uxcell directly through their official website or the retailer from whom the product was purchased. When contacting support, please have your product model number and purchase details readily available.
Manufacturer: uxcell
Model Number: R260 (Alternative identifiers: US-SA-AJD-101832, a15050900ux0067)
ASIN: B014818SPA