Important Safety Information
Please read all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Always use the adjustable levelers to ensure the desk is stable on uneven floor surfaces.
- Exercise caution during assembly due to the desk's weight (approximately 202 pounds). It is recommended that 2 people perform the assembly.
- Do not exceed the maximum weight recommendation of 200 pounds for the desk's surface.
- Keep small parts and packaging materials away from children.
Product Overview
The Bush Business Furniture Series C Elite Left Hand Bowfront Desk Shell with 36W Return is designed for commercial and home office environments. It features a durable thermally fused laminate surface resistant to scratches and stains, and a 1-inch thick construction for strength. This L-shaped desk configuration provides an expansive work area.

Figure 1: Assembled Bush Business Furniture Series C Elite Left Hand Bowfront Desk Shell with 36W Return in Hansen Cherry. This image shows the complete desk unit from an elevated front-right perspective, highlighting its L-shaped configuration and Hansen Cherry finish.
Key Features:
- Dimensions: 78.31"D x 58.86"W x 29.84"H
- Material: Thermally Fused Laminate over Engineered Wood
- Color: Hansen Cherry
- Wire Management: Integrated grommets for cable organization.
- Stability: Adjustable levelers for uneven floors.
- Durability: Superior resistance to scratches and stains.

Figure 2: Dimensional drawing of the desk. This diagram provides precise measurements for the depth (78.31 inches), width (58.86 inches), and height (29.85 inches) of the assembled desk, useful for space planning.
Setup and Assembly
Assembly is required for this product. It is recommended that two adults perform the assembly due to the size and weight of the components. Please ensure all parts are present before beginning assembly. Tools are not included.
Before You Begin:
- Unpack all components and verify against the parts list (refer to the separate assembly guide provided with your purchase).
- Clear a spacious area for assembly to prevent damage to components or flooring.
- Gather necessary tools (e.g., screwdriver, hammer).
Assembly Steps:
Follow the detailed, step-by-step instructions provided in the separate assembly manual included in your product packaging. This manual contains diagrams and specific guidance for connecting each component of the desk shell and return.
Note: Customer reviews indicate that instructions can be challenging to follow. Take your time and carefully review each step before proceeding.
Operating Instructions
Wire Management:
The desk features integrated wire management grommets to help organize cables and keep your workspace tidy. Open the grommet covers to route power cords, data cables, and other wires through the desktop.

Figure 3: Close-up of a wire management grommet on the desk surface. This image illustrates how cables can be neatly routed through the desktop opening, reducing clutter.
Adjustable Levelers:
Each leg of the desk is equipped with adjustable levelers. These can be rotated to compensate for uneven floor surfaces, ensuring the desk remains stable and level. Adjust them as needed to eliminate wobbling.

Figure 4: Close-up view of an adjustable leveler at the base of a desk leg. This image demonstrates the mechanism used to stabilize the desk on uneven flooring by rotating the foot.
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the laminate finish.
- Spills: Clean spills immediately to prevent staining, especially on the Hansen Cherry finish.
- Inspection: Periodically check all fasteners and connections to ensure they remain tight. Retighten if necessary.
- Protection: Use coasters for beverages and desk pads for writing or heavy objects to further protect the surface.
Troubleshooting
Common Issues and Solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk is wobbly. | Uneven floor surface or loose connections. | Adjust the levelers on the bottom of the desk legs. Check and tighten all assembly fasteners. |
| Difficulty during assembly. | Instructions unclear or missing parts. | Carefully re-read the assembly manual. Contact customer support if parts are missing or if further assistance is needed. |
| Surface scratches or stains. | Improper cleaning or sharp objects. | Clean with a soft, damp cloth. Avoid abrasive materials. Use desk pads for protection. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | SRE010HC |
| Brand | Bush Furniture |
| Product Dimensions (D x W x H) | 78.31" x 58.86" x 29.84" |
| Color | Hansen Cherry |
| Material | Thermally Fused Laminate, Engineered Wood |
| Weight | 202 Pounds |
| Maximum Weight Recommendation | 200 Pounds |
| Assembly Required | Yes |
| Recommended Assembly Persons | 2 |
| Special Features | Adjustable Levelers, Wire Management Grommets |
Warranty and Support
Manufacturer's Warranty:
This Bush Business Furniture product is backed by a 10-year limited warranty from the manufacturer. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support:
For assembly assistance, replacement parts, or any questions regarding your product, please contact Bush Business Furniture's U.S.-based customer service team.
- Phone: 1-800-950-4782
- Hours: Monday - Friday, 8:00 a.m. to 7:30 p.m. (EST)

Figure 5: Customer support contact information for Bush Business Furniture. This image displays the customer service phone number and operating hours, along with the company logo.
Product Video Overview
Watch this official video from Bush Business Furniture to learn more about the Studio C Collection, which includes this desk model, and its features.
Video 1: Bush Business Furniture Studio C Collection Overview. This video showcases various configurations and finishes available within the Studio C line, demonstrating the versatility and design of the furniture, including the desk shell.