OXO Good Grips Small Cube Silicone Ice Tray with Lid

Introduction

This OXO Good Grips Silicone Ice Cube Tray with Lid is designed to simplify ice making and storage. It features a flexible silicone tray for easy ice removal, a rigid frame for stability during transport, and a lid to prevent spills and odors. This tray produces 48 small 2.2 cm ice cubes, ideal for various beverages.

Image: The OXO Good Grips Small Cube Silicone Ice Tray with Lid, showing its compact design.

Setup

1. Unpack: Carefully remove all components from the packaging.
2. Initial Cleaning: Before first use, wash the silicone tray, rigid support, and lid with warm, soapy water or place them in a dishwasher. Rinse thoroughly and dry.

Image: Separated components of the ice tray, including the lid, two silicone trays, and the rigid support.

Operating Instructions

1. Assemble the Tray: Place the flexible silicone ice cube tray securely into the rigid plastic support.
2. Fill with Water: Fill the silicone tray with water up to the desired level. Avoid overfilling to prevent cubes from fusing together.


Image: A hand filling the silicone ice tray with water from a faucet.

3. Attach the Lid: Place the lid firmly onto the rigid support. This prevents spills and protects the ice from freezer odors.
4. Transport to Freezer: Use the rigid support to carry the filled tray to your freezer. The sturdy frame prevents bending and spilling.
5. Freeze: Place the tray in the freezer. The lid allows for convenient stacking of multiple trays, optimizing freezer space.


Image: Multiple OXO ice trays stacked neatly inside a freezer compartment.

6. Remove Ice Cubes: Once frozen, remove the tray from the freezer. Hold the silicone tray upside down and gently twist. For individual cubes, press on the bottom of each cube through the flexible silicone to release them.


Image: Hands twisting the flexible silicone tray to release ice cubes onto a surface.

Maintenance and Care

• Cleaning: The silicone tray, rigid support, and lid are all dishwasher safe. Alternatively, wash by hand with warm, soapy water.
• Drying: Ensure all components are completely dry before reassembling and storing to prevent ice buildup or odors.
• Storage: Store the clean and dry ice tray in a cupboard or drawer. The lid allows for hygienic storage.

Troubleshooting

• Ice Cubes Not Releasing Easily: Ensure the ice is fully frozen. Twist the silicone tray more firmly and press on the bottom of each cube. Running warm water over the back of the tray for a few seconds can also help.
• Water Spilling During Transport: Verify that the lid is securely attached to the rigid support before moving the tray to the freezer.
• Ice Absorbing Freezer Odors: Always use the lid when freezing ice. The lid creates a seal that helps protect the ice from absorbing unwanted smells from other freezer contents.

Specifications

Warranty and Support

OXO stands by the quality of its products. If you encounter any issues with your OXO Good Grips Small Cube Silicone Ice Tray, please contact OXO customer support for assistance. We are committed to providing solutions, including repair or replacement, to ensure your satisfaction. Your feedback helps us improve our products and services.

For further support or to learn more about OXO products, please visit the official OXO website or contact their customer service department directly.