Kebo Shower Column With Shower Rail Set User Manual

Introduction

Thank you for choosing the Kebo Shower Column With Shower Rail Set. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new shower system. Please read this manual thoroughly before installation and retain it for future reference.

Figure 1: Kebo Shower Column With Shower Rail Set. This image displays the complete shower column unit, featuring the overhead rain shower, a hand shower on a rail, and multiple body jets, all integrated into a sleek, wall-mounted panel.

Important Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Ensure all water supply lines are turned off before beginning installation.
• Consult a qualified plumber if you are unsure about any installation steps.
• Do not use abrasive cleaners or harsh chemicals on the product's surface.
• Verify that all connections are secure and leak-free before restoring water supply.
• Keep small parts out of reach of children.

Package Contents

Carefully unpack the box and ensure all items are present and undamaged. If any parts are missing or damaged, contact Kebo customer service immediately.

• Shower Column Unit
• Shower Rail
• Hand Shower
• Mounting Hardware (screws, anchors, gaskets)
• Installation Manual (this document)
• Valve (pre-installed or separate, as per model)

Setup and Installation

This section outlines the steps for installing your Kebo Shower Column. Professional installation is recommended.

Tools Required:

• Drill
• Measuring Tape
• Pencil
• Level
• Adjustable Wrench
• Screwdriver (Phillips/Flathead)
• Sealant Tape (Teflon Tape)

Installation Steps:

1. Prepare the Installation Area: Ensure the wall surface is clean, dry, and structurally sound. Turn off the main water supply to the bathroom.
2. Mark Mounting Points: Hold the shower column against the wall at the desired height. Use a level to ensure it is straight. Mark the positions for the mounting brackets/holes with a pencil.
3. Drill Holes: Drill pilot holes at the marked locations. Insert wall anchors if necessary, depending on your wall material.
4. Connect Water Lines: Apply sealant tape to the threaded connections of your hot and cold water supply lines. Connect them to the corresponding inlets on the back of the shower column. Ensure connections are tight to prevent leaks.
5. Mount the Column: Secure the shower column to the wall using the provided mounting hardware. Ensure it is firmly attached and stable.
6. Install Hand Shower and Rail: Attach the shower rail to the column or wall as per the design. Slide the hand shower holder onto the rail and connect the hand shower hose to the designated outlet on the column.
7. Test for Leaks: Slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are present, tighten the connections or reapply sealant tape.
8. Functionality Test: Test all functions of the shower column, including the overhead shower, hand shower, and body jets, to ensure proper operation and water flow.

Operating Instructions

Your Kebo Shower Column is designed for ease of use, offering multiple water outlets and temperature control.

• Temperature Control: Use the main temperature handle (typically the lower or central knob) to adjust the water temperature. Turn towards blue for colder water and red for warmer water.
• Water Flow Diverter: The diverter knob (usually located above the temperature control) allows you to switch between the different water outlets:
  • Overhead Rain Shower
  • Hand Shower
  • Body Jets (3 massage body jets)
  Rotate the knob to select your desired water output.
• Hand Shower Adjustment: The hand shower can be removed from its holder for targeted rinsing. The holder on the rail allows for vertical adjustment to suit different user heights.
• Pressure Balance Valve: The integrated 3-way pressure balance valve helps maintain consistent water temperature and pressure, even when other water sources in your home are in use.

Care and Maintenance

Regular cleaning and proper maintenance will ensure the longevity and optimal performance of your shower column.

• Cleaning the Surface: Use a soft cloth and mild, non-abrasive soap and water to clean the anti-finger stain surface. Rinse thoroughly and dry with a soft cloth to prevent water spots.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, ammonia-based products, bleach, or acidic cleaners, as these can damage the finish.
• Cleaning Shower Nozzles: Over time, mineral deposits may accumulate in the showerhead and body jet nozzles. Gently rub the rubber nozzles to dislodge any buildup. For stubborn deposits, a solution of white vinegar and water can be used.
• Check for Leaks: Periodically inspect all connections for any signs of leaks. Address any leaks promptly to prevent water damage.

Troubleshooting

This section addresses common issues you might encounter with your shower column.

Specifications

Warranty and Customer Support

For warranty information or technical support, please contact Kebo customer service directly. Keep your purchase receipt as proof of purchase.

Kebo Customer Service: Refer to the product packaging or Kebo's official website for contact details.

For more information, visit the official Kebo website: www.kebo.com (Note: This is a placeholder URL, please refer to actual manufacturer website).