Introduction
Thank you for choosing the Graco Changing Table. This manual provides essential information for the safe assembly, operation, and maintenance of your changing table. Please read all instructions carefully before assembly and use. This changing table is designed to provide a secure and convenient surface for changing your baby and offers ample storage for nursery essentials.
For a detailed installation guide, please refer to the official Installation Manual (PDF).
Safety Information
Your child's safety is paramount. Always follow these safety guidelines:
- Maximum Weight Recommendation: Do not exceed 30 pounds (13.6 kg) on the changing surface.
- Never Leave Child Unattended: Always keep your child within arm's reach while on the changing table.
- Use Safety Strap: Always secure your child with the provided safety strap.
- Assembly: Ensure all parts are correctly assembled and fasteners are tightened according to the instructions. Regularly check for loose hardware.
- Placement: Do not place the changing table near windows, cords, or other hazards.
- Damage: Discontinue use if any part of the changing table is broken, damaged, or missing. Contact customer support for replacement parts.
- GREENGUARD Gold Certified: This product is screened for over 10,000 chemicals and volatile organic compounds (VOCs) known to pollute indoor air, contributing to a healthier nursery environment.
Parts List
Before assembly, verify that all components are present. The packaging typically includes:
- Changing Table Frame Components (legs, side rails, back panel, shelves)
- Water-Resistant Changing Pad
- Safety Strap
- Hardware (screws, bolts, nuts, washers, Allen wrench)
- Assembly Instructions
If any parts are missing or damaged, do not proceed with assembly. Contact Graco customer service immediately.
Setup and Assembly
Assembly is required for this changing table. Please follow the step-by-step instructions provided in the included manual. A general overview of the assembly process is as follows:
- Unpack all components and lay them out on a clean, soft surface to prevent scratching.
- Attach the side rails to the legs using the provided hardware.
- Secure the back panel to the frame.
- Install the two storage shelves into the designated slots, ensuring they are level and secure.
- Place the water-resistant changing pad onto the top surface and attach the safety strap as instructed.
- Ensure all fasteners are tightened securely before use. Do not overtighten.
Image: Fully assembled Graco Changing Table in Espresso, showcasing its sturdy design and two open shelves.
Image: The Graco Changing Table with the included water-resistant changing pad in place, ready for use.
Operating Instructions
The Graco Changing Table is designed for ease of use and organization.
- Changing Surface: Place your baby on the water-resistant changing pad. Always keep one hand on your baby while changing to prevent falls. Secure the safety strap around your baby.
- Storage: Utilize the two open shelves to store diapers, wipes, creams, and other changing essentials within easy reach. Organize items to maintain a clutter-free and safe changing environment.
Image: The changing table demonstrating its storage capabilities with various baby items neatly arranged on the two open shelves.
Maintenance
Proper care will ensure the longevity and safety of your Graco Changing Table.
- Cleaning: Wipe the changing table frame with a damp cloth and mild soap. Avoid abrasive cleaners.
- Changing Pad: The water-resistant changing pad can be wiped clean with a damp cloth and mild soap. Allow to air dry completely.
- Regular Checks: Periodically inspect all screws and bolts to ensure they are tight. Retighten if necessary. Check for any signs of wear, damage, or loose parts.
- Storage: If storing the changing table, ensure it is in a dry, temperate environment to prevent warping or damage to the wood.
Image: A close-up view of the water-resistant changing pad surface, illustrating its easy-to-clean property.
Troubleshooting
If you encounter any issues with your Graco Changing Table, consider the following:
- Wobbling: Ensure all screws and bolts are securely tightened. Check that the changing table is placed on a flat, even surface.
- Missing Parts: Refer to the parts list in the assembly manual. If parts are missing, contact Graco customer service for assistance.
- Damage: If any part of the changing table is damaged, discontinue use immediately and contact customer support for guidance or replacement parts.
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 37 x 19.25 x 44 inches (L x W x H) |
| Item Model Number | 00524-369 |
| Maximum Weight Recommendation | 30 Pounds (13.6 kg) |
| Material Type | High-quality pine wood and composites |
| Material Composition | Wood |
| Finish | Brown (Espresso) |
| Item Weight | 29 pounds (13.15 kg) |
| Certifications | GREENGUARD Gold Certified, JPMA Certified |
Image: Diagram illustrating the key dimensions of the Graco Changing Table: 44 inches height, 37.01 inches length, and 19.33 inches width.
Warranty
The Graco Changing Table is backed by a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, improper assembly, negligence, alteration, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Support
For further assistance, replacement parts, or warranty inquiries, please contact Graco customer service. You can also visit the official Graco Store on Amazon for more product information and contact options.
