1. Introduction
Welcome to the Jaybird X2 Sport Wireless Bluetooth Headphones user manual. These premium Bluetooth headphones are designed to provide skip-free music and calls, perfect for sports and active lifestyles. This manual will guide you through the setup, operation, and maintenance of your new headphones.
2. What's in the Box
Your Jaybird X2 package includes the following items:
- Jaybird Premium X2 wireless earbuds
- Silicone Ear Tips (6 pairs)
- Secure-Fit Ear Fins (6 pairs)
- Sport Comply Foam Ear Tips (6 pairs)
- Cord Clip
- Cord Management Clips (2)
- USB 2.0 Charging Cable
- Protective Case
Image: Jaybird X2 headphones, protective case, various ear tips, ear fins, charging cable, and cord management clips.
3. Setup
3.1. Charging Your Headphones
Before first use, it is recommended to fully charge your Jaybird X2 headphones. Locate the micro USB charging port on one of the earbuds. Gently remove the back cover to reveal the port. Insert the micro USB charging cable and connect it to any USB power source.
Image: A close-up view of a Jaybird X2 earbud with its back cover removed, exposing the micro USB charging port. Text on the image indicates "Micro USB Charging (Cable Included)" and "8 Hour Super-Capacity Battery HD™".
A red LED light indicates that your headphones are charging. A green LED light indicates a full charge. A full charge typically takes about 2 hours and provides approximately 8 hours of playtime. A 30-minute charge can provide about 90 minutes of play.
Video: This video demonstrates the process of charging and pairing your Jaybird X2 Sport Wireless Bluetooth Headphones, showing how to access the charging port and initiate Bluetooth connection.
3.2. Pairing Your Headphones
To pair your Jaybird X2 headphones with a device:
- Ensure your headphones are within 1 meter (3 feet) of your device.
- Press and hold the middle button on the controller for at least 4 seconds until the LED status indicator flashes red and green. A voice prompt will confirm that your buds are searching for a music device.
- Enable Bluetooth on your phone or music device.
- Select "Jaybird X2" from the list of available devices.
- If prompted for a passcode, enter 0000.
- A voice prompt will confirm that your headphones are connected.
If pairing is unsuccessful, power off your X2 buds by pressing the middle button for at least 4 seconds, then repeat the pairing steps. Your X2 buds can pair with and remember up to eight devices.
Image: The Jaybird X2 headphones are shown with a graphic indicating compatibility with various Bluetooth-enabled devices such as smartphones, laptops, desktops, tablets, and smart speakers.
4. Fit and Comfort
The Jaybird X2 headphones are designed for a perfect fit, offering multiple customization options for optimal sound and security.
4.1. Comply Premium Sport Memory Foam Ear Tips
Your X2 buds include three pairs of premium Comply foam ear tips (small, medium, large). These memory foam tips expand to provide a custom fit, excellent noise isolation, and comfort.
- Place the foam tips over the speaker housing.
- Once securely in place, roll the foam between your thumb and finger to compress it.
- Insert the compressed foam tip into your ear.
- Hold in place for 15-30 seconds while the foam expands to create a custom seal.
Image: A close-up of two black Comply Premium Ear Tips, highlighting their foam material and the yellow inner core.
4.2. Secure-Fit Ear Fins
The X2 buds come with patented ergonomic Secure-Fit Ear Fins in various sizes to ensure they stay in place during activity.
- Slide the Secure-Fit Ear Fins all the way back onto the buds, behind the locking ridge.
- Rotate each bud so the tip of the ear fin fits into the top of the bowl of each ear. The fins should fit snugly.
4.3. Over/Under-Ear Fit Options
You can wear your X2 buds either under your ears (traditional fit) or over your ears for an advanced fit that keeps the cord off the back of your neck. Silicone ear tips are also provided as an alternative to the foam tips.
Image: A pair of Jaybird X2 headphones shown in an over-ear wearing style, with the cable running behind the neck.
4.4. Cord Management
Use the included cord management clips to secure any slack in the cable. Make an S-shape with the middle section of the cord and insert it into two of the three slots in each clip. Adjust the clips to allow for head movement.
5. Operating Instructions
The in-line controller on your Jaybird X2 headphones provides intuitive control over your audio and calls.
5.1. Basic Controls
- Power On/Off: Press and hold the middle button for at least 4 seconds.
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
- Play/Pause: Press the middle button.
- Skip Track Forward: Press and hold the '+' button for 1 second.
- Skip Track Backward: Press and hold the '-' button for 1 second.
5.2. Call Management
- Answer/End Call: Press the middle button.
- Reject Call: Press and hold the middle button for 1 second.
- Redial: Press the middle button twice.
- Mute/Unmute Call: Press the '+' and '-' buttons at the same time.
Video: This video provides a detailed overview of the earbud controls on the Jaybird X2 Sport Wireless Bluetooth Headphones, demonstrating how to manage volume, playback, and calls.
6. Maintenance
Your Jaybird X2 headphones are designed for durability and performance, especially during active use.
6.1. Sweatproof Design
The Jaybird X2 headphones feature a lifetime sweatproof warranty, ensuring they withstand intense workouts and outdoor activities. After heavy use or exposure to sweat, it is recommended to gently wipe down the earbuds and cable with a dry cloth.
6.2. Cleaning
Regularly clean the ear tips and ear fins to maintain hygiene and optimal sound quality. Remove the ear tips and fins and wipe them with a damp cloth. Ensure they are completely dry before reattaching them to the earbuds.
7. Troubleshooting
If you encounter issues with your Jaybird X2 headphones, try the following steps:
- No Power: Ensure the headphones are fully charged. Connect them to the charging cable and check for the red LED indicator.
- Pairing Issues: Make sure Bluetooth is enabled on your device and the headphones are in pairing mode (flashing red and green LED). Try turning both the headphones and your device off and on again.
- Intermittent Connection: Ensure your device is within the Bluetooth range (up to 10 meters/33 feet) and there are no significant obstructions. Avoid placing your device in areas that might block the signal, such as deep pockets or behind multiple layers of clothing.
- Poor Sound Quality: Check that the ear tips are correctly sized and properly sealed in your ear canal. Ensure the ear tips are clean and free from debris.
- Controls Not Responding: Ensure the headphones are powered on and connected to your device. Try restarting the headphones.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | X2-S |
| Connectivity Technology | Bluetooth |
| Wireless Communication Technology | Bluetooth |
| Battery Life | 8 Hours |
| Bluetooth Range | 10 Meters |
| Item Weight | 0.03 Kilograms (1.2 ounces) |
| Water Resistance Level | Water Resistant (Sweatproof) |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Control Type | Remote |
| Compatible Devices | Smartphones, Laptops, Desktops, Tablets, Smart Speakers |
| Manufacturer | Logitech, Inc |
| Product Dimensions | 7.3 x 2 x 4.75 inches |
9. Warranty & Support
Jaybird X2 Sport Wireless Bluetooth Headphones come with a Lifetime Sweatproof Warranty. For any warranty claims or technical support, please refer to the official Jaybird support channels or contact the manufacturer, Logitech, Inc.
