Keuco Edition 400 Grab Bar (Model 11507010000) Instruction Manual

1. Introduction

This instruction manual provides essential information for the safe installation, proper use, and maintenance of your Keuco Edition 400 Grab Bar, model 11507010000. Please read this manual thoroughly before installation and retain it for future reference.

The Keuco Edition 400 Grab Bar is a high-quality, chrome-plated brass handle designed for wall-mounted installation in modern bathrooms, offering support and utility.

2. Product Overview

2.1 Components

• Keuco Edition 400 Grab Bar (350 mm, Chrome Plated)
• Mounting Hardware (screws, Fischer brand anchors/dowels)

2.2 Key Features

• Material: Chrome-plated brass handle, nickel finish
• Design: Elegant, T-shaped, 350 mm length
• Installation: Wall-mounted, concealed fixings
• Durability: Designed for long-term use in bathroom environments

Figure 1: The Keuco Edition 400 Grab Bar, a sleek chrome-plated handle designed for bathroom safety and utility. It features a smooth, polished surface and a robust construction for wall mounting.

3. Setup and Installation

Important: Installation should be performed by a qualified professional or a person with adequate technical knowledge. Ensure the mounting surface is suitable and can support the required load.

3.1 Tools Required (Not Included)

• Drill
• Drill bits appropriate for wall material and anchor size
• Level
• Pencil
• Screwdriver
• Measuring tape

3.2 Installation Steps

1. Select Location: Choose a suitable wall location for the grab bar, ensuring it is at a comfortable and accessible height. Use a level to mark the desired mounting points accurately.
2. Drill Holes: Using the appropriate drill bit, drill holes at the marked locations. Ensure the depth and diameter of the holes match the provided Fischer brand anchors/dowels.
3. Insert Anchors: Insert the provided wall anchors into the drilled holes until they are flush with the wall surface.
4. Mount Grab Bar: Position the grab bar over the anchors, aligning the mounting holes. Secure the grab bar firmly to the wall using the provided screws. The design ensures that the screws are concealed once installed, providing a clean aesthetic.
5. Test Stability: After installation, gently apply pressure to the grab bar to ensure it is securely fastened and stable before full use.

4. Operating and Safety Guidelines

The Keuco Edition 400 Grab Bar is designed to provide support and stability. Adhere to the following guidelines for safe use:

• Intended Use: This grab bar is intended for providing support when entering or exiting a shower, bath, or for general assistance in the bathroom.
• Weight Limit: Do not exceed the maximum recommended weight limit for grab bars as specified by local building codes or safety standards. While robust, excessive force or weight can compromise its integrity.
• Regular Inspection: Periodically check the grab bar for any signs of looseness, damage, or corrosion. If any issues are detected, discontinue use and address them immediately.
• Cleaning: Refer to the Maintenance section for proper cleaning instructions to preserve the finish and structural integrity.

5. Maintenance

To maintain the chrome-plated finish and ensure the longevity of your Keuco Edition 400 Grab Bar, follow these cleaning and care instructions:

• Regular Cleaning: Clean the grab bar regularly with a soft, damp cloth and a mild, non-abrasive cleaning agent.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, or strong chemical solutions (e.g., ammonia-based cleaners, bleach) as these can damage the chrome finish.
• Drying: After cleaning, wipe the surface dry with a soft, clean cloth to prevent water spots and maintain its luster.
• Inspection: During cleaning, inspect the mounting points for any signs of looseness or corrosion.

6. Troubleshooting

If you encounter any issues with your Keuco Edition 400 Grab Bar, refer to the following common problems and solutions:

6.1 Grab Bar Feels Loose

• Cause: Mounting screws may have loosened over time.
• Solution: Carefully re-tighten the mounting screws. If the screws do not hold, the wall anchors may be compromised. In such cases, professional assistance may be required to re-secure the grab bar using new anchors or by relocating it.

6.2 Finish Appears Dull or Stained

• Cause: Accumulation of soap scum, hard water spots, or improper cleaning agents.
• Solution: Clean the surface with a soft cloth and a mild, non-abrasive cleaner specifically designed for chrome finishes. Ensure to dry thoroughly after cleaning. Avoid using abrasive materials.

7. Specifications

8. Warranty and Support

For warranty information or technical support regarding your Keuco Edition 400 Grab Bar, please contact Keuco customer service directly. Refer to the official Keuco website or product packaging for contact details and specific warranty terms applicable to your region.

Manufacturer: Keuco GmbH & Co. KG

Website: www.keuco.com