Burco 4454 Driver Side Power Replacement Mirror Glass User Manual

1. Introduction

This manual provides detailed instructions for the installation, maintenance, and general information regarding the Burco 4454 Driver Side Power Replacement Mirror Glass. This product is specifically designed for 2012-2015 CHEVROLET CAPTIVA SPORT vehicles. Please read this manual thoroughly before attempting any installation or maintenance to ensure proper fit and function.

Burco mirror replacements are manufactured in the USA using high-quality glass and CNC equipment, meeting or exceeding OEM specifications for a superior quality alternative to original mirror assemblies.

2. Product Overview

The Burco 4454 is a direct replacement mirror glass for the driver's side of specified Chevrolet Captiva Sport models. It is designed to replace only the glass component of the side view mirror assembly. The product includes Redi-Stick adhesive pads for installation, eliminating the need for additional adhesive purchases.

Figure 2.1: Burco 4454 Driver Side Power Replacement Mirror Glass. This image displays the shape of the replacement mirror glass, which is specifically contoured for the driver's side of the 2012-2015 Chevrolet Captiva Sport. The glass appears flat and ready for installation.

Key Features:

• Vehicle Specific Fit: Designed for 2012-2015 CHEVROLET CAPTIVA SPORT (Driver Side).
• Dimensions: Measures 8 1/16 inches diagonally (longest diagonal dimension from top corner to opposing bottom corner).
• Adhesive Included: Comes with Redi-Stick adhesive pads for secure mounting.
• Glass Only: This product includes only the mirror glass and adhesive; the motor mount or plastic backing is NOT included.
• Quality: Made in the USA with high-quality glass, meeting or exceeding OEM specifications.
• Mirror Adjustment: Designed for power-adjustable mirror assemblies.
• Lens Curvature: Flat.

3. Setup and Installation

Proper installation is crucial for the functionality and safety of your replacement mirror glass. It is recommended to perform this installation in a clean, dry environment. If you are unsure about any step, consult a professional automotive technician.

3.1. Tools and Materials Required (Not Included)

• Protective gloves
• Safety glasses
• Clean cloth
• Glass cleaner or rubbing alcohol
• Pry tool (plastic trim removal tool recommended)

3.2. Preparation

1. Ensure the vehicle is parked on a level surface with the engine off and parking brake engaged.
2. If the old mirror glass is broken, carefully remove all shattered pieces to prevent injury. Wear protective gloves and safety glasses.
3. Clean the mirror motor mount or backing plate thoroughly. Remove any old adhesive residue, dirt, or debris using a clean cloth and glass cleaner or rubbing alcohol. The surface must be completely dry and free of contaminants for the new adhesive to bond properly.

3.3. Installation Steps

1. Carefully remove the protective backing from the Redi-Stick adhesive pads on the back of the new Burco mirror glass. Avoid touching the adhesive surface.
2. Align the new mirror glass with the motor mount or backing plate on the vehicle's mirror housing. Ensure the orientation is correct (wider side typically towards the vehicle).
3. Once aligned, gently press the mirror glass firmly onto the motor mount/backing plate. Apply even pressure across the entire surface of the glass for at least 30 seconds to ensure proper adhesion.
4. Allow the adhesive to cure. While the mirror will feel secure immediately, full bond strength is typically achieved within 24-48 hours. Avoid washing the vehicle or exposing the mirror to extreme conditions during this curing period.

4. Operating the Mirror Glass

The Burco 4454 replacement mirror glass is a passive component designed to provide a clear, undistorted reflection for safe driving. Once installed, its operation is integrated with your vehicle's existing power mirror adjustment system.

• Adjustment: Use your vehicle's interior mirror control switch to adjust the angle of the mirror glass for optimal rear and side visibility.
• Visibility: Ensure the mirror provides a clear view of the blind spots and traffic behind your vehicle. Adjust as needed for different drivers or driving conditions.

5. Maintenance

Regular maintenance will help preserve the clarity and longevity of your replacement mirror glass.

• Cleaning: Clean the mirror surface with a soft, lint-free cloth and a standard automotive glass cleaner. Avoid abrasive cleaners or harsh chemicals that could damage the glass or its coating.
• Inspection: Periodically inspect the mirror glass for any signs of damage, cracks, or loosening from the backing plate. Address any issues promptly to maintain safety.
• Adhesive Care: While the Redi-Stick adhesive is strong, avoid excessive force or impact on the mirror, which could compromise the bond.

6. Troubleshooting

If you encounter issues with your Burco replacement mirror glass, consider the following troubleshooting steps:

• Mirror Not Sticking:
  • Ensure the backing surface was thoroughly cleaned and dry before applying the adhesive.
  • Verify sufficient pressure was applied during installation.
  • Allow adequate curing time (24-48 hours) before exposing to stress.
• Distorted Reflection:
  • Clean the mirror surface with a proper glass cleaner.
  • Ensure the mirror glass is fully seated and flat against the backing plate.
• Incorrect Fit:
  • Double-check that the Burco 4454 model is correct for your specific vehicle year (2012-2015 CHEVROLET CAPTIVA SPORT) and side (Driver Side).
  • Verify the diagonal measurement of your old glass matches the 8 1/16 inches specification.

If troubleshooting steps do not resolve the issue, or if you suspect a manufacturing defect, please contact Burco customer support.

7. Specifications

8. Warranty and Support

Burco, Inc. stands by the quality of its products, which are manufactured in the USA to meet or exceed OEM specifications. While specific warranty details are not provided in this manual, Burco products are generally covered against manufacturing defects.

For warranty claims, technical support, or any inquiries regarding your Burco 4454 replacement mirror glass, please contact Burco customer service directly. You may also visit the official Burco Store on Amazon for more information and contact options.

When contacting support, please have your product model number (4454) and purchase information readily available.